标准型陶瓷变阻压力变送器YS2A(YS-2)
standard pressure tran***itter
概述
YS2A(YS-2) 标准型压力变送器采用陶瓷压阻式传感器，低成本、高精度、高可靠性的实用型产品。本产品具有接口形式规范、体积小、抗干扰、价格低、重量轻、易安装等特点，广泛应用于工业领域或实验室，特别适用于能接触部分材质兼容的气体和液体压力测量。
General
Use Ceramic Piezoresistance as the sensitive element,cheap ,but high precision and reliability.(Standard type YS2A (YS-2) Pressure tran***itler) The product has regular connection ,compact design,disturbing-proof, light and easy to install,widely is used in industrial field and experiment chamber,especially suitable for the measurement of compatible gas and liquid.
特点
使用陶瓷压阻式传感器
表压、负压测量
量程：-100KPa～40MPa
输出4~20mA 或 1~5V、 0~10V
结构简便、易于安装
外形美观、体积小巧
Feature
Use sensor of Ceramic Piezoresistance
Measurement of Gauge pressure and negative pressure.
Range:-100KPa~40MPa
Output 4~20mA or 1~5,0~10V
Simple structure ,easy to install
Pretty appearance and compact design.
工作原理
抗腐蚀的陶瓷压力传感器没有液体的传递，压力直接作用在陶瓷膜片的正面，使膜片产生微小的形变。厚膜电阻印刷在陶瓷膜片的背面，连接成一个惠斯通电桥（闭桥）。由于压敏电阻的压阻效应，使电桥产生一个与压力、激励电压成正 比的高度线性电压信号。标准的信号根据压力量程的不同标定为 2.0/3.0/3.3mV/V，可以和应变式传感器相兼容。通过激光标定，传感器具有很高 的温度稳定性和时间稳定性，传感器自带温度补 偿 0～70℃。
通过高可靠的放大电路及精密温度补偿，将被测介质压力转换成 4~20mA.DC 或 1~5V.DC 等标准电信号。
Principle
Corrosion-proof ceramic pressure tran***itter withont tran***ission of liquid. When pressure is made on the face of ceramic diaphragm,litter distortion is formed.Thickfilm resistance is printed on the reverse of ceramic ,connecting a wheatstone bridge. Resulting from effect of Ceramic Piezoresistance ,one linear voltage signal which is direct ratio with pressure and encouraged voltage is formed. According to different ranges,standard signal is 2.0/3.0/3.3mV/V,which is compatible with strain has high temperature stability and time stability by laser marking ,along with temperature 0~70℃ , transforming media pressure to 4～ 20mA.DC、1～5V.DC electric signal by magnifying circuit.
|
典型应用
● ***治理
● 空气调节及净化设备
● 工业过程风压及气压测量
● 风压表、气动表
● 医药仪表及检漏设备
● 液压控制、环境保护
|
● 锅炉蒸汽控制
application
● Soot management
● Air condition and cleanse equipment.
● Measurement of air and wind pressure
● Wind pressure gauge and pneumatic gauge
● Medicine gauge and leakage equipment.
●Control of liquid pressure and protection of environment.
● Control of boiler steam.
技术参数：
测量范围：-100KPa～40MPa
测量介质：气体和液体
精 度：0.25 级或0.5 级可选
工作电压：24V.DC （12~30VDC）
输出信号：4~20mA (二线制),1~5V (三线制)
介质温度：-20～80℃
环境温度：-20～70℃
储存温度：-30～85℃
温度影响：TK<&plu***n; 0.02%FS/K，
压力接口：M20X1.5 阳螺纹
引线方式：Hirschminn 连接器（DIN43650）
Technic parameter
Range :-100KPa~40MPa
Media: gas and liquid
Accuracy : class 0.25 or 0.5 optional
Working voltage: 24V.DC (12~30VDC)
Outputsignal :4~20mA(two-line)1~5V(three-line)
Media temperature：20～80℃
Environment temperature：-20～70℃
Storage temperature：-30～85℃
Impact of temperature：TK<&plu***n; 0.02%FS/K
Pressure connection：M20X1.5 male thread
Down-lead ：Hirschminn connector（DIN43650）
产品详细资料请点击：S.YS2A 标准型压力变送器.pdf
变送器、压力变送器、陶瓷压阻式压力变送器YS-2、YS2A