【Introduction】
My company launched a new dry rubbing fastness improving agent for active, direct, sulfide, acid, disperse dyes and dyeing fabrics, especially the fluff sanding cloth, fiber significantly increased wet and dry rubbing fastness, excluding APEO, do not will produce silicon spot, does not affect the fabric handle, high temperature, can be directly with the silicone oil bath, washing.
【产品简介】
我公司推出的全新干摩擦牢度提高剂，适用于活性、直接、硫化，酸性、分散染料及印花织物，特别是起毛磨毛布，显著提高纤维的干湿摩擦牢度，不含APEO,不会产生硅斑，不影响织物手感，耐高温，可直接与硅油同浴，耐水洗。
【Chemical Composition】 special water-based polyurethane compound
【化学组成】 特殊水性聚氨酯化合物
【Properties】 Product Appearance: light yellow viscous body
Ionic nature: cationic
PH value: 5 ~ 7
Solubility: soluble in water,
【产品性状】 外 观： 浅***粘稠体
离子性： 阳离子
P H 值： 5~7
溶解性： 易溶于水中
【Features】 1, wide range of applicati*** can be used for cellulose fiber direct, reactive, sulfur dyes, acid, disperse dyes and printing fabric fixation treatment;
2 and improve the fabric of wet and dry rubbing fastness 1.5 ~ 2.5;
3, does not affect the shade and light fastness; treated fabric handle remain unchanged;
4, does not contain formaldehyde and APEO, in line with the EU REACH regulatory environmental requirements.
5, can be and cationic silicone softener to use the same bath to reduce the operational processes, reduce production costs.
6. Washable.
【产品特点】 1、应用广泛，可用于纤维素纤维直接、活性、硫化染料、酸性、分散染料和印花织物的固色处理；
2、提高织物的干湿摩擦牢度1.5~2.5级；
3、不影响色光和日晒牢度；处理后的织物手感保持不变；
4、不含甲醛与APEO，符合欧盟REACH***环保要求。
5、可和阳离子硅油、柔软剂等同浴使用，减少操作工序，降低生产成本。
6.耐水洗。
【Use pad technology】 :30-40g / L, (use in 20g / L may increase 0.5, 30 g / L may increase a, 40 g / L may improve the 1.5-2 level) at room temperature dip rolling,> 150 ℃ drying.
Impregnation process :3-4% (owf), at room temperature dip 10 ~ 15min, dehydrated> 150 ℃ drying.
Note: The need to strictly control the PH value of solid-bath, the proposed control 6 (pH meter measurement); can be added to adjust amount of glacial acetic acid or sodium carbonate. In the course of the work required to strictly control the PH value of solution, PH value is too low, the solution to clarify the role of wet Murti l do not; PH value is too high, turbid with flocculent solution, easy sticky roller, PH between 5.5 ~ 6.5 , the working fluid was slightly cloudy appearance of shape, color fastness beyond the scope of this PH will be greatly reduced. After the result of dyeing cloth surface with alkali or acid, affect the PH value of solid-color bath, so regularly check the misalignment. Working bath temperature 5 ℃ -60 ℃, the temperature of the high and low on the effect of impact on us.
【使用方法】轧染工艺：30-40g/L，（用量在20g/L时可提高0.5级，30 g/L时可提高1级，40 g/L时可提高1.5-2级）室温浸轧，＞150℃烘干。
浸渍工艺：3-4% (o.w.f)，室温浸染10-15min，脱水后＞150℃烘干。
注意：需严格控制固浴PH值，建议控制在6（酸度计测量）；可以添加适量冰醋酸或碳酸钠进行调节。在使用过程需严格控制工作液的PH值，PH值太低，溶液澄清，对湿摩提升作用不大；PH值太高，溶液混浊有絮状，易粘辊，PH在5.5-6.5之间时，工作液外观呈微浊状，超出此PH范围牢度就会大大降低。因染后布面上有碱或酸，影响固色浴的PH值，所以要定时检查调正。工作浴温度在5℃-60℃,温度的高低对效果的影响不大。
【Packaging and storage】 125kg / plastic ***ets at room temperature sealed preservation, shelf life of 12 months Important note: The above information is only for reference by users.
Product description is in my many years of experience in the Division based on the up, only for reference and tips, without any quality assurance, please make full use of pre-sample test.
【包装与贮存】 125kg/胶桶 室温密封保存， 保质期12个月 重要声明：以上资料仅供用户参考。
产品说明是在我司多年的经验基础上建立起来的，仅作参考和提示，不作任何质量保证，请在使用前做好充分的小样测试。