产品特点：
1、优质的光束质量：本系列机器比传统的打标机好很多，聚光直径不到20um/发散角是半导体泵浦激光器的1/4。适用于精密，精细打标。
2、使用成本低廉：电光转换率高，整机耗电不到500W，是灯泵浦激光器的1/10。
3、免维护操作：激光器无需进行任何维护，也不用调节和清洁镜片。
4、使用寿命长：使用激光二极管做为泵浦源，其工作时间长达10万小时。
5、体积小适用于恶劣环境：采用光缆实现激光传输，结构紧凑。在一定冲击振动和较高温等恶劣环境下也能正常工作。
6、加工速度快：是传统激光打标机的2到3倍。
广泛应用：
应用于对深度、光滑度、精细度要求较高的领域，首饰、饰品打标、纸品包装打标、汽车配件打标、电子五金打标、卫生洁具打标、玻璃制品打标、位图打标、可在金属，塑料等表面标刻出精美的图片。
技术参数
平均输出功率：20W
激光波长：1060nm
激光输出功率：20KHZ-80KHZ连续可调
供电电源：单相交流90-260V/50HZ-60HZ
用电功率：< 160W
外型尺寸：570mm*270mm*200mm
整机重量：< 22KG
聚焦光点直径：<0.01mm
打标速度：30mm/30mm-300mm/300mm可选
打标区域：> 800个标准字符/秒
半导体模块寿命：> 50万小时
计算机操作系统：Win98/Win2000/XP
冷却方式：内置风冷
控制接口：标准USB
可接受的字体与文件格式：WINDOWS操作系统字库的所有字体/字型(包括各国语言文字/条形码等);BMP/PCX等带256灰度图像文件及DXF/PLT格式的矢量图形文件
Feature
The new generation of fiber laser marking system has the revolutionary ：
1. It has volume slightly, the semiconductor module has got long life (>500 thousand hours), the power c***umption is low (160Q) 、The beam quality is high, the USB connection, supports WIN98/2000/XP and other operating system.
2. It is not influenced by bad circumstance and temperature change; May use the accumulator cell and an automobile ***oke under the power cut condition and so on carries on the operation.
Before Fiber laser appeared, laser marking system normally adopts Continuous or pulse output CO2 laser tube, ND-YAG Laser tube as laser source. Compared with traditional laser source, the performance of fiber laser is more excellent, Radiation angle is 1/4 of Diode-pumped laser tube (more suitable for precise and fine marking); the conversion efficiency of electro-optic is 1/10 of lamp pumped solid laser marker; The ***erage working time reaches 100,000 hours;
3. Fiber laser is a type of full air cooling, so it doesn’t need refrigerant device, freezing water pipe or temperature controller, the volume is reduced, energy c***umption is decreased, so the use cost of user is much lower than use cost of traditional laser marking system.
4.The pulse of ETL Fiber laser is 10-100KHz repeat frequency working, The volume of the fiber laser which ***erage power output is 10W-20W is only 46*160*250cm, and weight is 10kg; Because laser diode is working in low voltage, the conversion efficiency of electro-optic is up to 70%, and driving power supply can use UPS power supply when the power is shut off the power c***umption is only 160W.
Parameter
Power: 20W
Laser length: 1060nm
Laser power: 20KHZ-80KHZ continual
Power supply: Single phase AC 220V/50HZ-60HZ
Electricity power: < 160W
Machine dimension: 570mm×270mm×200mm
Wet weight: < 22KG
Focusing spot diameter: <0.01mm
Marking area: 30mm/30mm-300mm/300mm optical
Marking speed: > 800character/s
Semiconductor life: > 500,000 hour
Marking depth: 0.01-0.2mm
Operational system: Win98/Win2000/XP
Cooling mode: Air cooling
Controlling joint: Standard USB
Accept typeface and document format: WINDOWS operating system fonts all typefaces/Font (including various countries language and writing/Bar code and so on); BMP/Belt 256 gradation images document and DXF/ and so on PCXPLT form vector graphic file