300G自动吸料机、碳刷式吸料机，注塑机辅助上料机，填料机，配管38MM*3.5米*2条，机重12KG，静风压1300mm/H2O，输送距离4米，高度4米，输送产量50到350公斤1小时，按照ABS原料1.05密度计算，电机功率1000W，3相380V电压，外型尺寸：34×34×59
| AL-300G |
|
◎ 体积小、重量轻，可直接放置在干燥机或其他原料容器上，完成自动上料工作。
◎ 微电脑操作控制程序。
◎ 过载、缺料报警。
◎ 300G采用高速整流马达，体积小、吸力强，适合用于新料输送。
◎ 400G采用感应式高压风机，噪音小、寿命长。
◎ 首创采用线控器控制，机台下即可设定、控制，方便、快捷。设有空气过滤器（可选件）。
◎ ***all footprint&light,to be placed directly on other machineor container for auto loading.
◎ Microcomputer controlled.
◎ Alarm for overload and lack of material.
◎ High-speed rectificative motor of ***all footprint and strongsuction force for new material for AL-300G.
◎ Induction high-pressure pump of low noise and long servic timeforAL-400G.
◎ Cable-contrlo,easy to set and control.
◎ Filter ***ailable.
◎ 参数中的输送能力及吸料扬程是以ABS原料为测试材料得出的数据，实际参数根据塑料比重、形状及输送长度、高度、管路特性、参数设定等因素而改变。
◎ 吸料机在输送热料时，料管需选配耐160度高温料管。
◎ The parameters of the conveying capacity and suction lift are educed from tests on ABS.The actual parameters may be different due to the differences of the specific gr***ity and the shape of the material,the conveying distance and height,the specialty of pipeline and the seting of parameters.
◎ Heat-resistant(160℃)pipes should be used when conveying hot material.
| 型号（Model） |
AL-300G |
AL-400G |
| 马达Motor |
型式Type |
碳刷式 Carbon brush |
感应式Induction |
| 规格Specification |
1KW/1.3HP1Ф |
0.75KW/1HP3Ф |
| 输送能力（kg/h）Conveying capacity |
300-350 |
300-400 |
| 吸料扬程（m）Loading distance |
4 |
4 |
| 静风压（mm/H2O） Static wind pressure |
1300 |
1400 |
| 储料筒容量（L）Reservoir volume |
7.5 |
12 |
| 送料管内径（mm）Convering tube inner dim |
Ф38 |
Ф38 |
| 配送料管 Specification of the attached hoses |
Ф38mm×3.5m 2pcs |
Ф38mm×4m2pcs |
| 外形尺寸（cm）Dimensi*** |
34×34×59 |
45×37×66 |
| 净重（kg）Net weight |
12 |
27 |
|
