通 信 电 缆
|
|||||||||||
COMMUNICATION CABLES
|
|||||||||||
1、用途 Application
|
|||||||||||
广泛地应用于城镇、室内、郊区及企事业通信线路中,用于电话交换区域中继干线,连接配线架至交换机或连接交换
机内部各级机器,也可用于电话网的短距离布线。 |
|||||||||||
It`s wisely used for telephone trunk line,of exchange zone jointing line shelf,switchboard & the machines in the swichbard,shor***s tance wiring of wire nework
used for telecommunicatinon circuits in the Cities,towns,Villages,enterprises,etc. |
|||||||||||
2、型号及名称 Types and discripti***
|
|||||||||||
型号 Type
|
名称 Discription
|
||||||||||
HYA
|
铜芯实心聚烯经绝缘铝塑综合护层市内通信电缆
Copper conductor solid polyolefine insulated communication cable with Alpeth sheath. |
||||||||||
HYFA
|
铜芯泡沫聚烯经绝缘铝塑综合护层市内通信电缆
Copper conductor foam polyolefine insulated unfilled communication cable with Alpeth sheath. |
||||||||||
HYPA
|
铜芯泡沫皮聚烯经绝缘铝塑综合护层市内通信电缆
Copper conductor foam-skin polyolefine insulated unfilled communication cable with Alpeth sheath. |
||||||||||
HYAT
|
铜芯实心聚烯经绝缘填充型铝塑综合护层市内通信电缆
Copper conductor solid polyolefine insulated unfilled communication cable with Alpeth sheath. |
||||||||||
HYFAT
|
铜芯泡沫聚烯经绝缘填充型铝塑综合护层市内通信电缆
Copper conductor foam polyolefine insulatd filled communication cable with Alpeth sheath. |
||||||||||
HYPAT
|
铜芯泡沫皮聚烯经绝缘填充型铝塑综合护层市内通信电缆
Copper conductor foan-skin polyolefine filled communication cable with Alpeth sheath. |
||||||||||
HYV
|
铜芯聚乙烯绝缘聚***护套市内通信电缆
Copper conductor polyolefine insulated communication cable with shenath. |
||||||||||
根据用户需要可以制造自承试电缆:HYAC、HYFAC、HYPAC、HYATC、HYFATC、HYPATC,
和屏蔽(PCM)电缆,及纲带、纲丝铠装电缆 |
|||||||||||
The self-supporting a elal cable type HYAC、HYFAC、HYPAC、HYATC、HYFATC、HYPATC,and screened core cable(PCM)as well as steel tape armoured and steel wire armoured cable may be manufactured at the request of customers.
|
|||||||||||
3、规格 Specirication
|
|||||||||||
导电线芯直径(MM)
Conductor diameter(mm) |
对数
Number of pair |
||||||||||
0.32 0.4 0.5 0.6 0.63* 0.7 0.8 0.9* |
1400-3600
10-3000 10-2000 10-1400 10-1200 10-800 10-700 10-600 |
||||||||||
|
|
|
|
|
|
|
|
|
|
||
4、结构 Cable c***truction
|
|
||||||||||
(1)导体:导体为退火裸铜线,直径分别为0.32、0.4、0.5、0.6、0.63、0.7、0.8、0.9MM
|
|
||||||||||
(2)绝缘:绝缘材料为高密度聚乙烯或聚丙烯,型试为实芯绝缘、泡沫绝缘或泡沫皮绝缘,颜色
按照ASTMD 1534孟塞尔色谱标明。 |
|
||||||||||
(3)绞封:二根绝缘线绞合节距精选,以***大限度降低窜音,绞封的绝缘线按规定全色谱组合。
|
|
||||||||||
(4)续芯结构:绞封线组成12、13对的子单位、25对基本单位、50对超单位及100对超单位。每个
单位部用颜色扎带包扎以便识别,续芯通常由几个单位组成。 |
|
||||||||||
(5)填充屋(仅用于填充型电缆)续芯间隙用阻水化合物填充。
|
|
||||||||||
(6)缆芯包带:缆芯用一层或几层非吸潮性介电材料完全包覆。包带提供合适的电气强度,机
械强度及充分的阻热性能。 |
|
||||||||||
(7)护套:复合带外挤一层黑色低密度聚乙烯,二者完全粘结一起形成挡潮层护套。
|
|
||||||||||
(1) Conductor:Conductor shall be a solid annealed copper wire with diameter of 0.32,
0.40,0.5,0.6,0.63,0.7,0.8,0.9mm |
|
||||||||||
(2) Insutation:Insulation material shall be high ednsity polyethylene or polyethylene.Type of insulation shall be either solid,foam or foam-lore of the insulalion are speclfied in terms of the Munsell Color syetem of ASTMD1534.
|
|
||||||||||
(3) Twisted Pain:Two insulated conductors shall be twisted togetherto form a pair,The twist lengths are specially chosen to minimize the crosstalk.The insulated conductor shall be foamed into pairs in accordance with specified full color coding.
|
|
||||||||||
(4) Core C***trucli***:The pairs are assembled into sub-unit of 12 pairs or 13 s cunit of 25 pairs supper-unit of 50 pairs
and supper-unit of 100pairs.Each unit shall be id etihed by a lapping of colored ble core usually c***ists of severalunls. |
|
||||||||||
(5) Filling Compound (for filled cable only)The interestices of the cable core shall be filled with a water-repellent compound.
|
|
||||||||||
(6) Core Taping:The cable core shall be completely covered with one ormore layers of nonny groscopic shall provide a dequate dielectric chanical strengthang a sufficent heat barrier.
|
|
||||||||||
(7) Screen:One layer of doyble sides Alpeth tape shall be applied longitudinally on the cable core.
|
|
||||||||||
(8)Sheath:The black low density Alpeth tape shall be extruded over the Alpeth tape and both bonded completely to gether to form a moisture-barrier sheath.
|