SY-8370TM数码感应卡智能防盗门锁
数码智能防盗门锁是我公司推出的高新技术产品。该门锁采用美国dallas公司生产的TM卡作为开门钥匙，性能稳定、功能优越。锁内微电脑智能控制，是一种安全可靠，技术先进，操作灵活方便，便于管理的多功能智能型门锁。多种方便的开锁方式及自动锁闭功能特有安全模式,满足安全性的特殊要求, 周全的防破损防闯入防解密功能先进的低功耗设计,确保电池正常使用一年以上. 方便的应急电源功能应付火灾等事件的紧急开门功能键盘采用时尚的滑盖方式外观由名师设计§,并有优雅的声光配合采用金属一体化铸造,超强坚固采用先进结构的机械锁芯,确保安全采用多锁点可加天地销,提高安全性一体化门铃
适用于酒店、宾馆，机关部门，现代化办公室、写字楼，居民住宅等。产品性能特点不可复制和破解坚固、耐用的全钢封装TM卡钥匙多
产品
产品主要配置及技术指标室外机：锌合金铸造31(D)*61(W)*298(H)(mm)
室内机：强化防火塑料40(D)*75(W)*298(H)(mm)
可登录的钥匙数：最多可同时使用10把，并可随时重新登录密码：4-12位数，可随时重新登录遥控器（0402型号）
一键式，可随时重新登录，使用范围0-20m 电源：0401型用4节1.5v碱性电池，0402及0403型使用6v外接电源电源使用寿命：1年（限0401型，以每天使用10次为准）
工作温度：-40℃-70℃ 防闯入感应器：磁性感应器
工作距离为1-2cm
机械锁芯：采用钢铁铸造适用门的材质：木、钢、防盗门适用门的厚度： 40-60mm（如特殊厚度事先预定）
开门方向：左开门及右开门均可颜色：银灰\金黄字楼，居民住宅等。
TM卡说明
1、每把锁标准配置4把TM卡钥匙，最多可同时使用10TM卡钥匙
2、如果丢失已登录的TM卡钥匙，只要用其它需使用的TM卡钥匙重新登录就可使用，同时可使丢失的TM卡钥匙无法使用
3、需增加TM卡钥匙使用数量时，只需将所有要使用的TM卡钥匙（含已使用的及新增的)重新登录即可 TM卡钥匙 3、将所需使用的TM卡钥匙依次碰触TM卡钥匙碰触点，若碰触有效有声音提示
4、按一下TM卡钥匙登录键按钮，听到提示音，完成TM卡钥匙登录
5、关闭电池盖及密码保护盖
6、确认已登录的TM卡钥匙能否正常使用
设置密码说明
1、设置密码时如出现失误，锁会自动关闭，所以请携带已登录的TM 卡钥匙
2、密码可以设置为4-12位数
3、重新设置密码后，以前的密码自动失效．
失效步骤
1、打开密码保护盖
2、打开电池盖按一下钥匙登录键按钮，听到提示音，开始登录TM卡钥匙
3、在密码键盘上输入需要设置的密码
4、关上密码键保护盖及电池盖，听到提示音，完成密码设置
5、确认所设置的密码能否正常使用
外部关闭及开启说明
1、因密码外泄，遭受损害的一切后果由消费都承担责任，所以请注意密码保管，同时建设不定期更换密码
2、如连续输入5次错误密码时，响起警报声并停止工作
闭锁
1、没有安装防闯入感应器时，本锁会在开启5秒钟后随提示音自动关闭
2、安装了防闯入感应器时，本锁会在关门后随提示音自动关闭
3、打开（不按动密码键盘）然后关上密码保护盖，可以关闭本锁
开锁
1、用已登录的TM卡钥匙碰触点，随提示音开启本锁
2、打开密码保护盖，输入密码，然后关上密码保护盖，随提示音开启本锁内部开启及关闭:
闭锁
1、没有安装防闯入感应器时，本锁会在开启5秒钟后随提示音自动关闭
2、安装了防闯入感应器时，本锁会在关门后随提示音自动关闭
3、按一下开关按钮,可以关闭本锁开锁
按一下开关按钮，可以开启本锁手动旋钮
1、使用手动旋钮可以开启或关闭本锁，但经常使用该旋钮会导致产品性能下降，因此建议只在紧急情况时使用。
2、安装了防闯入感应器并在门外锁死状态下（参考锁死功能），使用手动旋钮开门会响起警报声
锁死功能
1、该功能适用于长期外出房内无人时
2、在该功能状态下，从内部无法使用天关按钮开锁
3、在该功能状态下，如安装了防闯入感应器，从内部使用手动旋钮开门会响起警报声
4、将已登录的TM卡钥匙接触在TM卡钥匙碰触点上接触5秒钟，随提示音进入外部锁死功能状态
5、用已登录的TM卡钥匙碰触TM卡钥匙碰触点，即可解除外部锁死功能状态．
内部锁死功能
1、该功能适用于全家人都在家里时，或者不希望外部打扰时
2、该功能状态下，从外部无论使用TM卡钥匙还是密码都无法开启本锁
3、按住开关按钮5秒钟，随提示音进入内部锁死功能状态
4、按一下开关按钮，即可解除内部锁死功能状态
安全模式
该模式适用于对安全程度要求较高的场合
1、打开密码保护盖
2、打开电池盖，按住密码设置键按钮5秒钟，随提示音本锁进入安全模式
3、关闭电池盖和密码保护盖
安全模式下外部开锁步骤
1、用已登录的TM卡钥匙碰触TM卡钥匙碰触点
2、打开密码保护盖，输入已设置的密码
3、关上密码保护盖，随提示音本锁开启
安全模式下外部闭锁及
内部开关锁与正常情况下相同解除安全模式
1、打开密码保护盖
2、打开电池盖，按一下密码设置键按钮,随提示音本锁解除安全模式
3、关闭电池盖和密码保护盖(不要按动密码键盘，否则丢失密码）
报警及解除防闯入报警
安装了防闯入感应器后，在本锁闭合状态下门被打开时，会响起警报声防破坏报警：当本锁外部锁体遭到破坏时，会响起警报声
密码错误报警：如连续输入5次错误密码时，会响起警报声
手动旋纽报警: 安装了防闯入感应器并在门外锁死状态下，使用手动旋钮开门会响起警报声
警报解除方法
用已登录的TM卡钥匙碰触TM卡钥匙碰触点，或者取下电池再装上即可解除报警紧急开门当发生火灾等紧急情况时，可采用下列方法开门
Ａ外部紧急开门：使用提供的紧急钥匙从外部开门，此时会响起警报声
Ｂ 内部紧急开门：使用手动旋钮从内部开门一体化门铃外部锁体上没有门铃按钮，按动即可响起门铃声．
使用注意事项
１禁止任意拆装：本产品由精密且复杂的电子及机械零部件组装而成，如果任意拆装，会导致工作异常，因此绝对禁止用户自行拆装
２禁止用水清洗：本产品如果进水，电路板会出现故障，因此清洗时请使用抹布擦净即可使用电池：本产品使用四节1.5v五号电池，以每天使用10次为标准查使用1年以上更换电池：当使用时显示灯明显变暗，请更换电池应急电源：当由于电池完全用尽而导致本产品不能工作时，可使用 9V电池从外部提供电源进行开闭操作
SY-8370TM Digital Proximity Card Intelligent Anti-theft Lock
Digital intelligent anti-theft lock is our company's latest high-tech product. Key of the lock uses TM card, produced by U.S. dallas company, which has stable performance and superior functionality. The internal lock is controlled by a microcomputer intelligent.Lock within the microcomputer intelligent control, is a kind of safe, reliable, manageable and multi-functional intelligent lock, which has advanced technology and operational flexibility. The lock has strong and durable steel package, TM card key, which can not be copied and cracked, various convenient ways of unlocking and automatic locking features, unique security model to meet the special requirements of safety. Its comprehensive anti-breakage design, anti-intrusion, anti-decryption function and advanced low power consumption can ensure the normal use the battery more than a year. In addition, it has the functions of convenient emergency power capabilities and the emergency open door of coping with fire, etc.
Its keyboard uses stylish slide form and the appearance designed by the famous designer. Besides, it has elegant sound and light tie, and use integrated cast metal, thus super strong. Also mechanical lock cylinder with advanced structure can ensure the safety of multi-point lock, which can improve security of integration doorbell.
Apply to hotels, guesthouses, authority departments, modern offices, office buildings, residential, etc.
Product Features: can not be copied and cracked; Strong and durable steel package; TM card; More than one key.
Products
Product main configuration and technical data
Outdoor Unit: Zinc alloy casting 31(D)*61(W)*298(H)(mm)
Indoor Unit: Strengthening anti-fire plastic 40(D)*75(W)*298(H)(mm)
Key number of available logining: Using 10 keys at the same time at most; at any time can re-login the password:4-12 numbers; at any time can re-login remote control (0402 model)
One-click, can re-login at any time; using range of 0-20m; power: 0401,0402,0403 model; with four 1.5v alkaline batteries; use an external power supply of 6v; power life: 1 year (limited to 0401 model, subject to 10 times per day)
Working temperature: -40℃-70℃
Anti-intrusion sensors: magnetic sensors
Working distance : 1-2cm
Mechanical lock cylinder: iron and steel casting
Material for doors: wood, steel, antitheft door
For door thickness: 40-60mm (special thickness need pre-schedule)
Open direction: left or right door open
Colors: silver/gold floor.
TM Card Description
One. Each lock standardly be equipped with four TM card keys, simultaneously using 10 TM card keys at most.
Two. Lost the logined TM card key, it is right to use other matching keys to re-login, and the lost TM card key can not be used at the same time.
Three. When need to increase the number of TM card key, you just need to re-login the TM card key (including the used and new).
Four. The required key sequence using the TM card touch the TM card key touch points, if the effective touch, a voice prompt.
Five. Click the login button of TM card key, when you hear a beep tone, then you complete the logining of TM card key.
Six. Close the battery cover and the password protection cover.
Seven. Make sure of the normal use of the logined TM card keys.
Password Description
One. When errors occurred in the process of seting password, the lock will automatically shut down, so please bring the logined TM card key.
Two.The password can be set to 4-12 digits.
Three. When re-set the password, the formal password will automatically be useless.
Failure Steps
One. Open password-protected cover.
Two. Open the battery cover to click the button of logining, when you hear a beep tone, then it is the beginning of TM card key logining.
Three. Enter the password on the keyboard to set the required password.
Four. Close the password key protection cover and the battery cover, when you hear a beep tone, then you complete the password logining.
Five. Make sure of the normal of the logined password.
External Closing and Opening Instructions
One. All consequences of damage lead by password leaks, consumer should be responsible for it. So please pay attention to the password storage, and set up system to change the password from time to time.
Two. If continuously input wrong password for 5 times, the sirens will sound and stop work.
Unlock
One. Use the logined TM card key to touch the point, with the beep tone to open the lock.
Two. Open password protection cover, enter the password, and then close the password protection cover, with the beep tone to open the lock.
Atresia
One. Not installing anti-intrusion sensor, the lock will automatically shut down with the beep tone after 5 seconds.
Two. Installing anti-intrusion sensor, the lock will automatically be closed with beep tone after the door closed.
Three. Click the switch button to control the lock be unlocked.
Click the Switch Button, Open the Manual Knob of the Lock
One. Using the manual knob can open or turnoff the lock, but frequently use it will cause the degradation of product performance. Therefore it is proposed to use it in emergencies only.
Two. Installing anti-intrusion sensor and in the state of door locking (reference lock function), using the manual knob to open the door will cause the sound of alarm.
Lock Function
One. The function suitable for people long-term out and no one in the room.
Two. In this functional state, people from the inside can not use the switch button to open the lock.
Three. In this functional state, if installed anti-intrusion sensor, using the manual knob from inside to open the door will cause the sound of alarm.
Four. Make the logined TM card key touch the contact of key point for 5 seconds, with the beep tone to reach the state of external lock function.
Five. Make the logined TM card key touch the contact of key point, then can remove the state of lock function.
Internal Lock Function
One. The function applies to the whole family all out, or do not want to bother by others.
Two. During the state of the function, from outside regardless of TM card key or password can not open the lock.
Three. Hold down the switch button for 5 seconds, with the beep tone to reach the state of internal lock function.
Four. Click the switch button, then can remove the state of internal lock function.
Safe Mode
This model applies to places for requiring higher level of security
One. Open password-protected cover.
Two. Open the battery cover, hold down the password set button for 5 seconds, with the beep tone to enter the safe mode.
Three. Close the battery cover and the password protection cover.
External Unlock Step under Safe Mode
One. Make the logined TM card key touch the contact of key point.
Two. Open password protection cover, then enter the set password.
ose the password protection cover, with the beep tone to open the lock.
External Lock and Internal Switch Lock under Safe mode
the same as Normal Circumstance
One. Open password protection cover.
Two. Open the battery cover, press the password set button, with the beep tone to remove the safe mode.
Three. Close the battery cover and the password protection cover (do not press the password keyboard, or will lose the password).
Alarm, Remove and the Anti-intrusion Alarm
After installing the anti-intrusion sensor and in the state of lock closing, when the door was opened, the siren will sound, and when the outside lock body was damaged, the alarm will also be sounded.
Password error alarm: If continuously input wrong password for 5 times, the sirens will sound and stop work.
Manual knob alarm: Installing anti-intrusion sensor and in the state of door locking, using the manual knob to open the door will cause the sound of alarm.
Alarm Remove Method
Make the logined TM card key touch the contact of key point, or remove the battery and then load it on, thus can discharge the alarm.
Emergency door open: For emergencies, such as fire, etc, the following methods can be used to open the door.
A. External emergency door open: Use the emergency key to open the door from the outside, then the siren will sound.
B. Internal emergency door open: Use manual knob to open the door from the inside, there is no doorbell button in the outside lock body, the door bell will ring just after you press it.
Caution
One. Prohibition of arbitrary disassembly: This product is assembled by sophisticated and complex electronic and mechanical parts, for any disassemble will result in abnormal state. So it is absolutely prohibit the user to remove it.
Two. Prohibition of using water to clean: If water enter the product, the circuit board will fail. So when clean, please use the cloth to wipe it.
Battery: This product uses four 1.5v AA batteries, 10 times per day as a standard, can use more than one year.
Battery replacing: When the indicator becomes dim, please replace the battery.
Emergency power supply: When the product does not work caused by fully exhausted of battery, you can use 9V battery to provide power from outside to operate.