企业资质

深圳市汉泰电子辅料有限公司

普通会员15
|
企业等级:普通会员
经营模式:
所在地区:广东 深圳
联系卖家:
手机号码:
公司官网:www.hantaismt.com
企业地址:
企业概况

深圳市汉泰电子材料有限公司长期供阿尔法系列(锡线,锡条,锡膏,助焊膏,助焊剂)千住系列(锡线,锡条,锡膏,助焊剂)阿米特系列(锡线,锡条,锡膏)乐泰系列(锡线,锡条,锡膏,底部填充胶,工业胶)减摩系列(锡线,锡条,锡膏)KOKI有铅无铅无卤无铅锡膏,TAMURA有铅无铅锡膏,铟泰有铅无铅无卤无铅锡膏......

阿尔法助焊剂3355-11阿尔法3355-11助焊剂

产品编号:3126518                    更新时间:2020-08-15
价格: 来电议定

深圳市汉泰电子辅料有限公司

  • 主营业务:锡膏,锡线,锡条,助焊剂,清洗剂,稀释剂,红胶
  • 公司官网:www.hantaismt.com
  • 公司地址:

联系人名片:

联系时务必告知是在"产品网"看到的

产品详情

 

ALPHA 3355-11  WATER SOLUBLE FLUX
 
DESCRIPTION
ALPHA 3355-11 Water Soluble Flux is a water removable flux used in the soldering of printed circuit and electronic ha***are. This formulation produces exceptional solder wetting to a wide variety of metallic surfaces and is unsurpassed in water solubility for thorough post solder removal.
 
APPLICATION
Primarily for foam application and conveyorized soldering, ALPHA 3355-11 Flux can be spray, dip, w***e or brush applied. Flux applicators and reservoir should be plastic or titanium only.
 
Flux coated surfaces should be preheated to provide optimum wicking and solder joint formation. The degree of preheat is dependent on many variables, such as conveyor speed, type of components and substrates. Entering the solder w***e with a topside temperature in the 210-230°F range is typical.
 
CONTROL
The foam applicators should be supplied with compressed air, free of oil and water. Maintain flux fluid level sufficiently above the aerator stone to produce adequate foam height. Adjust air pressure to produce the optimum height with foam c***isting of ***all uniform bubbles.
 
During use, the specific gr***ity of the flux should be checked periodically. This can be accomplished with a hydrometer, i.e., LONCO® Specific Gr***ity Kit (EQ030). Evaporated solvent should be replenished by the addition of flux thinner. In time, debris and contaminants will accumulate in the flux. For c***istent soldering performance, replace flux periodically. After dumping used flux, the reservoir and aerator stone should be thoroughly cleaned with flux thinner. Refill the reservoir with fresh flux and allow a few minutes for foam to stabilized before resuming solder operation.
 
REMOVAL
After soldering, the water soluble residues must be removed. Removal can be accomplished in multi-zone conveyorized in-line spray systems, automated batch spray systems (dishwashers) or multi-stage batch tank cleaning. Multiple zone in-line systems equipped with quality tap or conditioned water, an effective air knife and drying capacity can produce MIL P-28809 ionic cleanliness levels
 
A LONCOTERGE® saponifier or LONCO 2051 series Neutralizer product is recommended for improving cleanliness levels in batch and in-line systems with limited cleaning capabilities. Incorporating a saponifier or neutralizer will assist the removal of flux residues, aqueous spot masks and other contaminants.
 
 ORGANO-FLUX TM 3355-11 FLUX
PHYSICAL PROPERTIES
 
            PARAMETERS           TYPICAL VALUES            TEST METHOD
               
 Specific Gr***ity @ 25°C         0.95 &plu***n; 0.02               5-6-80-CC
 Pounds per Gallon                   7.91                  Calculated
 Solids Content wt/wt                 17%                  Calculated
 Flash Point                          71°F                  6-23-81-BB
 Acid Number                           60                   1-29081 MP
 % Chloride                            3.0                   2-4-81-MP
 Flux Thinner                     3355-11 Additive  

 

汉泰电子辅料有限公司是大陆地区***早从事***T工艺研究与制作的贸易商之一。公司具有多年电子行业从业经验,拥有一支高素质的***技术团队,专注服务于***T和PCB工艺制造焊接材料领域,主营阿尔法助焊剂、阿尔法锡膏、千住锡膏、阿米特锡膏、减摩锡膏、KOKI锡膏、铟泰锡膏、田村锡膏、***T贴片红胶、富士红胶、乐泰胶水、锡丝、锡条等***T焊接材料,欢迎来电咨询洽谈,我们将竭诚为您服务。
更多产品信息请登录http://

深圳市汉泰电子辅料有限公司电话:传真:联系人:

地址:主营产品:锡膏,锡线,锡条,助焊剂,清洗剂,稀释剂,红胶

Copyright © 2025 版权所有: 产品网店铺主体:深圳市汉泰电子辅料有限公司

免责声明:以上所展示的信息由企业自行提供,内容的真实性、准确性和合法性由发布企业负责。产品网对此不承担任何保证责任。