为了判断圆锥滚子徐州INA轴承能否重复使用，**须考虑轴承的损坏程度、机械性能、工作条件、检查周期等。检查结果表明轴承异常损坏。找出原因，制定对策。此外，检查结果表明，如果下面有几个缺点，轴承就不能再使用了，需要更换*新的轴承。
In order to judge whether the tapered roller Xuzhou INA bearing can be reused, ** bearing damage, mechanical properties, working conditi***, inspection cycle and so on must be c***idered. The inspection results show that the bearing is abnormally damaged. Find out the reas*** and formulate countermeasures. In addition, the inspection results show that if there are several shortcomings below, the bearings can no longer be used and new bearings need to be replaced.
1。徐州INA轴承任何内外环或滚轴都是分开的。
1. Any inner and outer rings or rollers of Xuzhou INA bearings are separated.
2。**二。任何内外环、滚轴和保持架都有裂纹和碎片。
2. * * two. Any inner and outer rings, rollers and cages h***e cracks and debris.
三。保持架磨损（基本部件失效类型）严重或铆钉松动严重。当轴承识别出轴承的真实性时，通过触摸轴承上的钢印，可以更快、更准确地识别轴承的真实性。如果你用手触摸***，它是不可触摸的，但你可以用钉子触摸它。
Three. Cage wear (failure type of basic components) is serious or rivet loosening is serious. When the bearing recognizes the authenticity of the bearing, it can recognize the authenticity of the bearing more quickly and accurately by touching the steel mark on the bearing. If you touch a stamp with your hand, it is untouchable, but you can touch it with a nail.
第四章。滚动面和滚动体上有明显的缺口和划痕。当徐州INA轴承识别出轴承的真实性时，通过触摸轴承上的钢印，可以更快、更准确地识别轴承的真实性。如果你用手触摸***，它是不可触摸的，但你可以用钉子触摸它。
The fourth chapter. There are ***ious notches and scratches on the rolling surface and the rolling body. When Xuzhou INA bearing recognizes the authenticity of the bearing, it can recognize the authenticity of the bearing more quickly and accurately by touching the steel seal on the bearing. If you touch a stamp with your hand, it is untouchable, but you can touch it with a nail.
5。滚道和滚动件表面生锈。
5. The surface of raceway and rolling parts is rusty.
6。滚道、挡板和滚动体表面明显堵塞。
6. The surface of raceway, baffle and rolling element is ***iously blocked.
第七章。内环的内径或外径有蠕变。
The seventh chapter. The inner diameter or outer diameter of the inner ring has creep.
8。过热和变色。徐州INA轴承具有额定负荷高、噪音低、大大降低维护成本、延长机器运行时间等优点。
8. Overheating and discoloration. Xuzhou INA bearing has the advantages of high rated load, low noise, greatly reducing maintenance costs and prolonging machine operation time.
轴（或杆）上的严重磨损（基本类型的部件故障）或划痕是由润滑故障或内部杂质引起的。通过触摸轴承上的钢印，可以更快、更准确地识别轴承。这种***如果你用手触摸它就没有接触，但是你可以用指甲触摸它来感受***的存在。徐州INA轴承应更换带有润滑剂（功能：减少或避免摩擦和磨损）或带有润滑剂的填料环，并应填充带有润滑剂的填料环。包装信应仔细清洗。
Serious wear (basic type of component failure) or scratches on the shaft (or rod) are caused by lubrication failure or internal impurities. By touching the steel stamp on the bearing, the bearing can be recognized more quickly and accurately. This kind of stamp has no contact if you touch it with your hand, but you can feel the existence of the stamp by touching it with your nails. Xuzhou INA bearings should be replaced with filling rings with lubricants (function: reduce or ***oid friction and wear) or with lubricants, and should be filled with filling rings with lubricants. Packing letters should be carefully cleaned.
文章来自：徐州SKF轴承 www.wh-
Article from: Xuzhou SKF Bearing www.wh-
文章来自：徐州INA轴承 a-
Article from: Xuzhou INA Bearing a-
文章来自：徐州NSK轴承
Article from: Xuzhou NSK Bearing
***：524085168
电话：0510-81207777
手机：13311666672/13395185757