徐州SKF轴承润滑脂润滑可以简化滚动轴承的周围结构。随着石油消耗量的增加，它已在工厂中使用。
Xuzhou SKF bearing grease lubrication can simplify the surrounding structure of rolling bearings. With the increase of oil c***umption, it has been used in factories.
在油脂润滑的使用中，关键的解释是类比的重要组成部分是选择适合工作条件的油脂，但轴承和轴承座的加注量对轴承温升、扭矩等也有很大的影响，应予以充分重视。轴承具有额定负荷高、噪音低、大大降低维护成本、延长机器运行时间等优点。当轴承识别出轴承的真实性时，通过触摸轴承上的钢印，可以更快、更准确地识别徐州SKF轴承的真实性。如果你用手触摸***，它是不可触摸的，但你可以用钉子触摸它。
In the use of grease lubrication, the key explanation is that the important component of analogy is to select the grease suitable for working conditi***, but the filling quantity of bearing and bearing seat also has a great influence on bearing temperature rise, torque and so on, which should be paid full attention to. Bearing has the advantages of high rated load, low noise, greatly reducing maintenance costs and prolonging machine operation time. When the bearing recognizes the authenticity of the bearing, it can recognize the authenticity of Xuzhou SKF bearing more quickly and accurately by touching the steel seal on the bearing. If you touch a stamp with your hand, it is untouchable, but you can touch it with a nail.
轴承空间和轴承座中的润滑脂量随轴承座的结构、空间体积、品牌和环境而变化。通常指标如下。
The amount of grease in bearing space and bearing seat varies with the structure, space volume, brand and environment of bearing seat. Usually the indicators are as follows.
首先，徐州SKF轴承应充满足够的润滑脂。此时，还应将润滑脂送至导向面和保持架的其余部分。其次，根据综合样本中列出的轴承转速与极限转速的关系，在轴承座的净空间中加入润滑脂，轴和轴承除外。
First, Xuzhou SKF bearings should be filled with sufficient grease. At this time, grease should also be sent to the guide surface and the rest of the cage. Secondly, according to the relati***hip between the bearing speed and the limit speed listed in the comprehensive sample, grease is added to the net space of the bearing seat, except for the shaft and the bearing.
1／2~2／3在50%
1/2~2/3 at 50%
50%或以上时为1/3~1/2
1/3-1/2 at 50% or more
在某些情况下，还应考虑减少摩擦力矩和防止加热等因素，以减少填充。另外，超低速轴承需要提***尘防水性能，而且几乎填满。
In some cases, factors such as reducing friction moment and preventing heating should also be c***idered to reduce filling. In addition, ultra-low speed bearings need to improve dust and waterproof performance, and almost filled.
因此，在确定合适的加注量时，**须掌握徐州SKF轴承座和每套轴承的空间容积。为此，深沟球轴承的空间容积见，以供参考。
Therefore, the space volume of Xuzhou SKF bearing seat and each set of bearings must be mastered when determining the appropriate filling quantity. For this reason, the space volume of deep groove ball bearing can be seen for reference.
此外，深沟球轴承的空间体积是指扣除球和保持架体积后，内外环之间的净空间体积。轴承具有额定负荷高、噪音低、大大降低维护成本、延长机器运行时间等优点。
In addition, the space volume of deep groove ball bearing refers to the net space volume between the inner and outer rings after deducting the volume of ball and cage. Bearing has the advantages of high rated load, low noise, greatly reducing maintenance costs and prolonging machine operation time.
钢冲压保持架的承载空间体积见备注表。超黄铜汽车保持架的徐州SKF轴承空间体积约为表值的50^60%。
The bearing space volume of the steel stamping cage is shown in the remark table. The space volume of Xuzhou SKF bearing of super brass car cage is about 50 ^ 60% of the table value.
文章来自：徐州SKF轴承 www.wh-
文章来自：徐州INA轴承 a-
文章来自：徐州NSK轴承
***：524085168
电话：0510-81207777
手机：13311666672/13395185757