| 品牌 | 盐城艾迪凯机械 | 型号 | 20+2 |
MAIN TECHNICAL PARAMETERS OF ENAMELLING MACHINE
1. Wire range: φ0.60 to φ2.00mm, φ1.00 to φ3.00mm, Copper and Aluminum wire both.
2. Total lines10 (5+5), 2 ovens, 5 lines each oven.
3. Mechanical speed, Max 40m/min (VD max = 40) and 50m/min (VD max = 50)
4. Coating passes Max. 13 (random combination for three layers)
5. Applicator: die
6. Pay-off: φ630 spool or frame pay-off
7. Take-up: 10sets, capstan separately controlled by frequency converter, with 10 sets inline drawing units, variable speed for each line.
(these can make according to your order)
8. Effective length of annealer: 12m, 2 annealers separately located.
9. Effective length of oven: 8m.
10. Total Installed power: 368KW.
11. Machine has two enamel tanks.
12. The machine has two wire cooler.
13. Annealer has ultrasonic system for bare wire solution, 2 sets.(for aluminum wires)
14. It is vertical machine.
15. 45dys need to make machine after receiving down payment.
16. 2 people come for installation in your factory and you will provide worker to share hand with them.
17. Need less than one week required for installation in our work place.
18. Electric c***umption is 1920kw/24hours.
19. Output of aluminum enameled wire 1mm, 2mm, 3mm are 1.5t***, 2.5t***, and 3.5t*** respectively.
20. Wind-up bobbins: PT25, PT45, PT60, PT90.