All Smith MCAT-series 3’’ flange mount truck pumps are designed for 1200 RPM maximum shaft speed and deliver come parably to other makes at 650 RPM PTO speed.This means damage associated with over-revving is eliminated and will allow for faster fuel deliveries where larger meters can be utilized.
所有史密斯MCAT-3系列3”法兰配备车载泵设计为在1200RPM最大轴速，在650RPM动力输出速度时，传送相同的至其他装置。这意味着损坏与结束加速有关系的可能性被排除并且允许在大容量仪表可以被还用的地方燃料输出更快。
SINGLE MECHANICAL SEAL
The MCAT-series utilizes a SINGLE mechanical shaft seal instead of two that double shaft extended type pumps provide.
MCAT-系列使用一个单一的机械密封轴代替两个双轴式泵提供延伸。
HEAVY DUTY OPTIONS STANDARD
All MCAT-series pumps incorporate the heavy duty NSSA option as standard rcraft quality steel gear sets and Tungsten Carbide idler gear shafts allow for maximum efficiency at higher differential pressure.
所有MCAT-系列泵包括重型NSSA区域作为标准装置。钢制齿轮飞行器装置和碳化钨的中间齿轮轴允许在更高压差时产生最大效能。
BALANCED LOADING
Unlike vane pumps that are unbalanced,especially at higher differential pressures,all MCAT-series pumps feature balanced internal porting that greatly enhances pump life.
和不平衡的变化的泵不同，特别是在更高的压差下，所有MCAT-系列泵的特性平衡了内部的端口这样就提高了泵的使用寿命。
EASE OF MAINTENANCE
All MCAT-series pumps feature the patented SUPERSEAL mechanical the seal assembly that does not have to be removed from the pump in the event the gear set needs to be replanced;no loose seal components to worry about.
所有MCAT-系列泵的特性为专利品SUPERSEAL机械密封部件不要从泵体上移除齿轮设置需要被取代，不牢固的密封部件可担心。
STARINER DISC ON AUXILIARY INLET
All MCAT-series pumps incorporate a reinforced 30-mesh strainer disc on the auxiliary inlet should the pump ever be used to self load.
所有MCAT-系列泵包括一个加强30-mesh过滤器的备用入口曾经被用来自我装载。
OVERSIZED INTERNAL BYPASS RELIEF VALVE
All MCAT-series pumps are designed for minimal overpressure should the internal bypass relief valve ever pass valve porting is oversized to minimize damage due to ternal relief valve is set at 150 psid and as such,an external bypass valve is required by the Underwriters Laboratories.
所有MCAT-系列泵设计为了最小超压的内部安全阀永远开放。由于气阻旁通阀端口过大来减小损害。内部安全阀被设置在150psid，例如，通过Underwriters Laboratories外部旁通阀是需要的。
OPTIONAL FLANGES
All MCAT-series pumps are provided with two 90 ºthreaded elbows for the discharge and auxiliary inlet.Optional flanges includes a blind flange for the auxiliary inlet,threaded or weld type flanges,2” NPT,for the discharge or auxiliary inlet.
所有MCAT-系列泵为了出口和备用入口都配备了两个90 º螺纹的弯口。可选择的法兰包括为了备用入口强制性的法兰，螺纹或者焊接类型的法兰和为了出口和备用入口的美国管螺纹。