在修理和拆卸江苏NSK轴承时，首先记录轴承的外观，确认润滑剂的剩余量，并在取样后清洗轴承。清洗剂通常使用***和煤油。
When repairing and disassembling Jiangsu NSK bearings, first record the appearance of the bearing, confirm the remaining amount of the lubricant, and clean the bearing after sampling. The cleaning agent usually uses gasoline and kerosene.
清洗后，轴承分为粗洗和精洗两种。
After cleaning, the bearings are divided into two kinds: rough washing and fine washing.
首先，将金属网置于容器中，使江苏NSK轴承不直接接触容器中的污物。在粗洗中，如果轴承与污物一起旋转，则会损坏轴承的滚动表面，因此应引起重视。在***清洗中，用刷子清除油脂和胶粘剂，基本清理并进行精细清洗。
First, the metal mesh is placed in the container so that the NSK bearing of Jiangsu does not directly touch the dirt in the container. In rough washing, if the bearing rotates together with the dirt, it will damage the rolling surface of the bearing, so attention should be paid to it. In crude oil cleaning, remove grease and adhesives with brush, basically clean up and carry out fine cleaning.
精细清洗江苏NSK轴承是在清洗过程中仔细清洗轴承。此外，应定期更换清洁油，以保持清洁。
Fine cleaning of NSK bearings in Jiangsu is careful cleaning of bearings during the cleaning process. In addition, clean oil should be changed regularly to keep it clean.
判断江苏NSK轴承拆卸后是否可再次使用，清洗轴承后检查轴承，仔细检查滚道表面、滚动表面、表面状态、保持架磨损、轴承间隙增大、损坏和。对减小尺寸精度没有影响。不可分离的小滚珠轴承等，用单手平内圈，转动外圈，确认其是否光滑。
Judge whether the Jiangsu NSK bearing can be used again after disassembly. After cleaning the bearing, check the bearing and carefully check the surface of the raceway, the rolling surface, the surface state, the wear of the cage, the increase of the bearing clearance, the damage and the damage. There is no effect on reducing the size accuracy. Non separable ***all ball bearings, etc., with a single hand flat inner ring, turn the outer ring to confirm whether it is ***ooth.
圆锥滚子轴承和其他可分离轴承可分别检测江苏NSK轴承滚动体和外环的滚道表面。
Tapered roller bearings and other separable bearings can be used to detect raceway surfaces of rolling bearings and outer rings of NSK bearings in Jiangsu.
大型江苏NSK轴承不能用手转动。检查滚动、滚道、保持架和侧部外观。轴承越重要，检查就越仔细。
Large Jiangsu NSK bearings can not be rotated by hand. Check rolling, raceway, cage and side appearance. The more important the bearing is, the more careful the check is.
在判断江苏NSK轴承能否再次使用时，取决于损伤程度、机械性能、重要性、操作条件、检查周期等相关因素。但是，如果在检查中发现以下缺陷，轴承不能继续使用，需要更换新轴承。
When judging whether the NSK bearing in Jiangsu can be used again, it depends on the degree of damage, mechanical properties, importance, operating conditi***, inspection cycle and other related factors. However, if the following defects are found in the inspection, the bearing can not continue to be used, and new bearings need to be replaced.
（a）内圈、外圈、滚动体和保持架的裂纹或间隙。
(a) cracks or gaps in inner ring, outer ring, rolling body and cage.
（b）任何江苏NSK轴承环和卷筒都已销毁。
(b) any Jiangsu NSK bearing ring and reel h***e been destroyed.
（c）滚动表面、边缘和滚动体表现出明显的磨损。
(c) rolling surfaces, edges and rolling bodies show ***ious wear and tear.
（d）保持架磨损明显，或铆钉明显松动。
(d) the cage wear is ***ious, or the rivet is ***iously loose.
（e）江苏NSK轴承滚道和滚动体上有锈斑或***。
(E) there are rust stains or scars on the NSK bearing raceway and rolling body of Jiangsu.
（f）在江苏NSK轴承滚道和滚动体上有严重的压痕或瘀伤。
(f) there are serious indentation or bruise on the NSK bearing raceway and rolling body of Jiangsu.
（g）江苏NSK轴承内圈内径或外圈外径有明显的蠕变。
(g) the inner diameter or outer diameter of the NSK bearing inner race of Jiangsu has ***ious creep.
（h）明显的过热和变色。
(H) ***ious overheating and discoloration.
（I）江苏NSK轴承用油脂密封，密封圈或防尘盖严重损坏。
(I) Jiangsu NSK bearing grease seal, seal ring or dust cover seriously damaged.
文章来自：江苏SKF轴承 www.wh-
The article comes from: Jiangsu SKF bearing www.wh-
文章来自：江苏INA轴承 a-
The article comes from: Jiangsu INA bearing a-
文章来自：江苏NSK轴承
The article comes from: Jiangsu NSK bearing