宁波乔福贸易有限公司***代理美国盖茨笔式张力计7401-0076
美国盖茨笔式皮带张力计GATES的详细介绍：
| 品牌 | GATES | 型号 | 7401-0076 |
| 类型 | 刻度 | 测量范围 | 0-170（N） |
美国GATES笔式皮带张力计
您知道正确的皮带张力计可延长皮带寿命20%-50%吗?
***快速,简便,***的皮带张一3检测工具-笔式皮带张力计
适用于各种V型皮带,正时皮带的张力检测!
HOW TO USE？
- CAUTION:Before doing maintenance or tensioning on belt drives,turn equipment off and lock e gua*** on machinery when running.
Place amatchedsetof belts over the she***e grooves.Take up the slack untilthebeltsappear fairly taut.
- With the drive stopped,measure the belt span lenth of yourdrive(seesketch).Set the rubber O-ring on the body of the tensiongaugeat thedimension equal to 1/64 inch ×32,1/2 inch.
- Set the O-ring on the plunger at 0 against the body ofthetensiongauge.
- With the tension gauge perpendicular to the span,apply a forcetoabelt in the center of the flect the belt until bottomofthelarge O-ring is even with the top of the next belt,or thebottomofa straight edge laid across the top of
other belt(s)lease pressure and read pounds of force used atO-ringonplunger.
Note:When new belts are installed on a drive,the tension willdroprapidlyduring the first few hours.Thus,for new belts,tightentothe initialinstallation defection force shown in eck tensionfrequently during the first 24 bsequentretensioning should fall between theminimumand maximum forces shownin the tables.
- Compare the force required in step 4 with the ranges inthetablesbelow.
Tightenorloosenbelts to bring them into the recommened range.
Note:The proper tension for V-belt drive is the lowest tensionatwhichthe belts won’t slip under peak load condition