| 型号 | 瑞典JOHNSON | 规格 | 瑞典JOHNSON |
| 品牌 | 瑞典JOHNSON | 材质 | 瑞典JOHNSON |
| 名称 | 瑞典JOHNSON | 适用范围 | 瑞典JOHNSON |
希而科贸易（上海）有限公司-德国Silkroad24 GmbH 中国***
联系人：张敏 （业务部销售经理）
TEL:13585754584 021-58375543-829
FAX:021-61179684
EMAIL:zm@
***:1784691511
MSN:zhangsir_goal@
希而科优势代理瑞典JOHNSON PUMP泵 Centrifugal Pumps
Vertical & Horizontal Single Stage Pumps - Johnson Pump brand
 |   |  | |
| Single Stage Pumps | Multistage Pumps » | Magnetic Drive Pumps » | Hygienic Pumps |
| Vertical/Horizontal;CombiBloc, CombiChem,CombiDirt, CombiNorm, CombiPro, CombiFlex,CombiSump, CombiWellInline; CombiLine, CombiLine BlocSelf-priming; CombiPrime, FreFlow, KGE | Vertical/Horizontal; MCH, MCV Self-priming;MCHZ | He***y duty; CombiMag, CombiMagBloc Non metallic; MDR |
Vertical and Horizontal Single Stage Pumps CombiBloc, CombiChem, CombiDirt, CombiNorm, CombiPro, CombiFlex, CombiSump, CombiWell |
| CombiBloc | ||
| Close-coupled horizontal centrifugal pump to EN 733 (DIN 24255) | ||
| Features | Suitable for | |
| • | Compact, economic, space s***ing c***truction | Low viscosity, clean or slightly contaminated and aggressive liquids |
| • | No shaft alignment required | |
| • | Outstanding hydraulic performance |  |
| • | High efficiency impeller | |
| • | Closed impeller with back vanes providing axial balancing of impeller loads | |
| • | Easy maintenance | |
| • | Low maintenance cost | |
| • | Easy to install without he***y foundation | |
| • | Atex certification | |
| • | Suitable for vertical arrangement | |
| • | Standard mechanical shaft seal EN 12756 (DIN 24690) | |
| Technical data | |||
| Casing: | Cast iron, Nodular cast iron, Bronze, Stainless steel | Max. liquid temp: | 120°C |
| Impeller: | Cast iron, Bronze, Stainless steel | Max. pressure: | 1000 kPa (10 bar) |
| Max. capacity: | 850 m3/h | Max. speed: | 3 600 rpm |
| Max. delivery head: | 105 m | ||
 Downloads(Sales brochure, Data Sheet, Instruction Manual)For downloadable CAD drawings to assist in planning our pumps into your system go to Technical info/Dimensional Drawings. |  Back to the Top | ||
| CombiChem | ||
| Horizontal centrifugal pump to ISO 2858 (EN 22858 (DIN 24256)) and ISO 5199 | ||
| Features | Suitable for | |
| • | Standardized and modular design | Low viscosity, clean or slightly contaminated liquids, especially in the chemical industry |
| • | Flanges according to ISO 7005 PN 16 | |
| • | For stainless steel execution 150 lbs ANSI B 16.5 ***ailable |  |
| • | Outstanding hydraulic performance | |
| • | High efficiency impeller | |
| • | Closed impeller with back vanes providing axial balancing of impeller loads | |
| • | Half open impeller with wear plate and external adjustment | |
| • | Easy maintenance through the Back-Pull-Out principle | |
| • | Single unbalanced / balanced seals to EN 12756 (DIN 24960) | |
| • | Single and double cartridge seals with seal support system | |
| • | Quenched shaft sealing | |
| • | Atex certification | |
| • | Dry-shaft design, pumped liquid not in contact with the shaft | |
| • | Heating jacket optional | |
| • | Robust shaft design | |
| • | Extended life time | |
| • | 2-Deepgroove ball bearings or double row angular contact thrust bearing and cylindrical roller bearing | |
| • | Grease or oil bath lubricated bearings | |
| Technical data | |||
| Casing: | Cast iron, Nodular cast iron, Bronze, Stainless steel | Max. liquid temp: | 200°C |
| Impeller: | Cast iron, Bronze, Stainless steel | Max. pressure: | 1600 kPa (16 bar) |
| Max. capacity: | 800 m3/h | Max. speed: | 3 600 rpm |
| Max. delivery head: | 160 m | ||
| Downloads(Sales brochure, Data Sheet, Instruction Manual) For downloadable CAD drawings to assist in planning our pumps into your system go to Technical info/Dimensional Drawings. | Back to the Top | ||
| CombiDirt | ||
| Robust centrifugal pump for liquids containing solids | ||
| Features | Suitable for | |
| • | Can handle solids | Transporting liquids containing solids of all sorts. CombiDirt is also capable of handling gaseous liquids and media requiring self priming conditi***. |
| • | Vortex technology | |
| • | Prevent clogging | |
| • | Standardized and modular design |  |
| • | Flanges according to ISO 7005 PN 16 | |
| • | ***ailable in horizontal and vertical execution | |
| • | Self-priming option ***ailable | |
| • | Atex certification | |
| • | Handle liquids with varying amounts of gas | |
| • | Impeller with back vanes providing solids kept away from shaft sealing area | |
| • | Easy maintenance through the Back-Pull-Out principle | |
| • | Single unbalanced mechanical seals to EN 12756 (DIN 24960) | |
| • | Quenched shaft sealing | |
| • | Gland packing | |
| • | Dry-shaft design, pumped liquid not in contact with the shaft | |
| • | Robust shaft design | |
| • | Extended life time | |
| • | Double row angular contact thrust bearing and cylindrical roller bearing | |
| • | Grease or oil bath lubricated bearings | |
| • | In vertical execution many mounting opti*** (floor, bulkhead) | |
| • | In vertical execution eight positi*** possible between suction and delivery connecti*** | |
| Technical data | |||
| Casing: | Cast iron, Nodular cast iron, Stainless steel, Hard faced Chromium steel, Steel alloys | Max. liquid temp: | 80°C |
| Impeller: | Cast iron, Nodular cast iron, Stainless steel, Hard faced Chromium steel, Steel alloys | Max. pressure: | 1000 kPa (10 bar) |
| Max. capacity: | 420 m3/h | Max. speed: | 1800 rpm |
| Max. delivery head: | 40 m | Max. free passage: | 100 mm |
| Downloads(Sales brochure, Data Sheet, Instruction Manual) | Back to the Top | ||
| CombiNorm | ||
| Horizontal centrifugal pump to EN 733 (DIN 24255) | ||
| Features | Suitable for | |
| • | Standardized and modular design | Low viscosity, clean or slightly contaminated liquids |
| • | Flanges according to ISO 7005 PN 16 | |
| • | Outstanding hydraulic performance |  |
| • | High efficiency impeller | |
| • | Closed impeller with back vanes providing axial balancing of impeller loads | |
| • | Easy maintenance through the Back-Pull-Out principle | |
| • | Single unbalanced / balanced seals to EN 12756 (DIN 24960) | |
| • | Single and double cartridge seals with seal support system | |
| • | Quenched shaft sealing | |
| • | Gland packing | |
| • | Atex certification | |
| • | Dry-shaft design, pumped liquid not in contact with the shaft | |
| • | Robust shaft design | |
| • | Extended life time | |
| • | 2-Deepgroove ball bearings or double row angular contact thrust bearing and cylindrical roller bearing | |
| • | Grease or oil bath lubricated bearings | |
| Technical data | |||
| Casing: | Cast iron, Nodular cast iron, Bronze | Max. liquid temp: | 200°C |
| Impeller: | Cast iron, Bronze | Max. pressure: | 16 bar (10 bar) |
| Max. capacity: | 1 500m3/h | Max. speed: | 3 600 rpm |
| Max. delivery head: | 140 m | ||
| Downloads(Sales brochure, Data Sheet, Instruction Manual) For downloadable CAD drawings to assist in planning our pumps into your system go to Technical info/Dimensional Drawings. | Back to the Top | ||
| CombiPro | |||
| He***y duty horizontal process pump to API 610, API 682 | |||
| Features | |||
| • | Centre-line mounted end-suction pump overhung single stage process pump | • | Atex certification |
| • | Design requirements according to API 610 | • | Robust shaft design |
| • | Seal chamber to API 682 | • | Extended life time |
| • | Pump casing and cover metal-to-metal fit with fully fully confined, controlled compression spiral wound gasket | • | 2 angular contact thrust bearings and cylindrical roller bearing |
| • | Fully integrated design – pump, motor, base plate, and accessories | • | Oil bath lubricated bearings |
| • | Outstanding hydraulic performance | • | Bearing housing cooling optional |
| • | High efficiency impeller | • | Easy maintenance through the Back-Pull-Out principle |
| • | Closed impeller or half open impeller with wear plate and external adjustment | • | Renewable wear rings for casing and impeller |
| • | Dynamically balanced impeller | • | Magnetic drive version according to API 685 optional |
| • | Flanges according to ISO 7005 PN 50 / 300 lbs ANSI B 16.5 | • | Vertical version optional |
 | Suitable for||||
| Thin, clean and slightly contaminated liquids in chemical/petrochemical industry, refineries and for general industrial applicati*** | ||||
| Technical data | ||||
| Materials: | Carbon steel, 13% Cr-steel, stainless steel (316) | Max. liquid temp: | 350°C | |
| Max. pressure: | 3500 kPa (35 bar) | |||
| Max. capacity: | 350 m3/h | Max. speed: | 3 600 rpm | |
| Max. delivery head: | 160 m | |||
| Downloads(Sales brochure, Data Sheet, Instruction Manual) | Back to the Top | |||
| CombiFlex | ||
| Vertical centrifugal pump to EN 733 (DIN 24255) | ||
| Features | Suitable for | |
| • | Standardized and modular design | Clean, slightly contaminated thin liquids |
| • | Compact design | |
| • | Flanges according to ISO 7005 PN 16 |  |
| • | Many mounting opti*** (floor, bulkhead, wall mounting) | |
| • | Eight positi*** possible between suction and delivery connecti*** | |
| • | Outstanding hydraulic performance | |
| • | High efficiency impeller | |
| • | Closed impeller with back vanes providing axial balancing of impeller loads | |
| • | Spacer-coupling option for easy maintenance | |
| • | Easy maintenance through the Top-Pull-Out principle | |
| • | Mechanical seal to EN 12756 (DIN 24960) | |
| • | Atex certification | |
| • | Dry-shaft design, pumped liquid not in contact with the shaft | |
| • | Robust shaft design | |
| • | Extended life time | |
| • | 2-Angular contact bearing | |
| • | Bearing bracket option allows a wide range of shaft seals | |
| Technical data | |||
| Casing: | Cast iron, Bronze | Max. liquid temp: | 200°C |
| Impeller: | Cast iron, Bronze, Alu-Bronze | Max. pressure: | 1000 kPa (10 bar) |
| Max. capacity: | 1500 m3/h | Max. speed: | 3 600 rpm |
| Max. delivery head: | 140 m | ||
| Downloads(Sales brochure, Data Sheet, Instruction Manual) | Back to the Top | ||
| CombiSump | ||
| A sump pump designed to EN 733 (DIN 24255), ISO 5199 - ISO 2858 / EN 22858, API 610 / API 682 | ||
| Features | Suitable for | |
| • | Standardised and modular design | Thin, clean or slightly contaminated liquids as water, effluent, cleaning products, chemicals, hydrocarb*** |
| • | Customized sump depths up to 10 m | |
| • | Outstanding hydraulic performance |  |
| • | High efficiency impeller | |
| • | Closed impeller with back vanes providing axial balancing of impeller loads | |
| • | Half open impeller with wear plate and external adjustment | |
| • | Oil seal standard shaft sealing. Gas tightening option by mechanical seal or Gland Packing | |
| • | Discharge flange according to ISO 7005 PN16, PN20, PN50 or ANSI B16.5 150 lbs, 300 lbs | |
| • | Atex certification | |
| • | Pumped liquid lubricated silicon carbide radial bearings | |
| • | External lubrication optional | |
| • | He***y duty grease lubricated double row angular contact bearing for axial loads | |
| • | Standard IEC flange motor | |
| • | Mounting plate vapor tight or pressurized design | |
| • | Rectangular or circular mounting plate | |
| • | API 610 / API 682 execution engineered for hydrocarbon and petrochemical processing industries | |
| Technical data | |||
| Casing: | Cast iron, Nodular cast iron, Bronze, Stainless steel, Stainless steel alloys, Nickel based alloys, Duplex | Max. liquid temp: | 160°C |
| Impeller: | Cast iron, Bronze, Stainless steel, Stainless steel alloys, Nickel based alloys, Duplex | Max. pressure: | 1600 kPa (16 bar), for API 610 up to 3500 kPa (35 bar) |
| Max. capacity: | 1500 m3/h | Max. viscosity: | 200 mPas |
| Max. delivery head: | 160 m | Max. speed: | 3 600 rpm |
| Downloads(Sales brochure, Data Sheet, Instruction Manual) | Back to the Top | ||
| CombiWell | |||
| Vertical sump pump to EN 733 | |||
| Features | Suitable for | ||
| • | Compact standardized and modular design |  | Water curtain spray booths (cast iron version) and solvents degreasing spray units (stainless steel version) |
| • | No shaft sealing | ||
| • | Flanges according to ISO 7005 PN 16 | ||
| • | For stainless steel execution ISO 7005 PN20/150 lbs ANSI B 16.5 ***ailable | ||
| • | Outstanding hydraulic performance | ||
| • | High efficiency impeller | ||
| • | Closed impeller with back vanes providing axial balancing of impeller loads | ||
| • | Liquid lubricated slide bearing | ||
| • | Standard IEC flange motor | ||
| • | Atex certification | ||
| Technical data | |||
| Casing: | Cast iron, Stainless steel | Max. liquid temp: | 80°C |
| Impeller: | Cast iron, Stainless steel | Max. pressure: | 1000 kPa (10 bar) |
| Max. capacity: | 300 m3/h | Max. speed: | 3 000 rpm |
| Max. delivery head: | 45 m | ||
| Downloads(Sales brochure, Data Sheet, Instruction Manual) | Back to the Top | ||
| SPX is much more than a Johnson Pump brand manufacturer – We are your solution provider! |
Multistage Pumps - Johnson Pump brand
  | | | |
| Multistage Pumps | Single Stage Pumps » | Magnetic Drive Pumps » | Hygienic Pumps |
| Vertical/Horizontal; MCH, MCV Self-priming; MCHZ | Vertical/Horizontal; CombiBloc, CombiChem, CombiDirt, CombiNorm, CombiPro, CombiFlex, CombiSump, CombiWell In-Line; CombiLine, CombiLine Bloc Self-priming;CombiPrime, FreFlow, KGE | He***y duty; CombiMag, CombiMagBloc Non metallic; MDR |