DC Servo motors
MSS Series
• Ratings to 6,000 RPM.
• Compact Length.
• Zero Cogging.
• Acceleration Torques to 10 x Rated. M***ILOR's axial air gap dish armature is specially suited for high resp***e servo drives. High and ***ooth torque to inertia ratio, non cogging torque low speed velocity control makes M***ILOR the motor of choice for the most exacting applicati***.
The M***ILOR MSS Series servomotors provide a 20% increase in power to weight and volume ratios and a 20% increase in power rate and acceleration capability over previous designs.
Incorporating an ironless rotor design, these industrial strength motors h***e an extremely long brush life and high efficiency.
M***ILOR MSS Series motors incorporate opti*** of tachometers and fail-safe holding brakes within the motor structure, and in many cases are half the length of equivalently rated conventional motors. |
DC Servo motors
CML Series
• ***all dimensi***.
• Radial magnetic flux.
• High performances.
• Square format.
| |  download Technical Specificati*** |
|
DC Servo motors
MS -EE xdllC Series
EExdIIC Series are axial air-gap servomotors housed in an enclosure into which gas can gain access: the gas can be ignited within the enclosure without the explosion damaging the enclosure or being tran***itted to any flammable atmosphere external to the enclosure. These motors comply with the requirements for Apparatus Group IIC specified in EN 50 018 (1977) + A1 to 3 and EN 50 014 (1977) + A1 to 5.
The classification referred to an ambient temperature of 70ºC is:
T5 for
MS-2 / MS-12 / MS-22
MA-3 / MA-20 / MA-30
T3 for
MS-4 / MS-6 / MS-8
MA-6 / MA-10
D.C. and A.C. "brushless" motors are included in the EExdIIC Series, incorporating opti*** of tachometer, resolver and parking brake fitted internally. |
AC Servo motors
XtraforsPrime
Technical data
Standard version
– Resolver feedback
– Shaft with keyway
– Protection IP-65
– Rotatable angled connectors
– PTC thermal sensor
– RoHS conform
– UL conform (UL-listed pending)
Opti***
– Various types of incremental encoders,
SinCos encoders, Hiperface, EnDat
– Shaft without keyway
– Protection IP-67
– Shaft seal
– Straight connectors
– Direct cable output
– NTC thermal sensor
Customized versi***
– Shafts (i.e. hollow shafts)
– Flanges, housings
– Windings
– Connecti***
– Executi*** according to customer’s
Specification
The modular c***truction concept is the basis for the wide range of standard models. The slotless stator design results in outstanding technical properties such as high speed, high torque, zero cogging, minimal torque ripple, high efficiency and high rigidity. Thus, these motors are perfectly suited for various demanding servo applicati***. |
AC Servo motors
MA - EE xdllC Series
EExdIIC Series are axial air-gap servomotors housed in an enclosure into which gas can gain access: the gas can be ignited within the enclosure without the explosion damaging the enclosure or being tran***itted to any flammable atmosphere external to the enclosure. These motors comply with the requirements for Apparatus Group IIC specified in EN 50 018 (1977) + A1 to 3 and EN 50 014 (1977) + A1 to 5.
The classification referred to an ambient temperature of 70ºC is:
T5 for
MS-2 / MS-12 / MS-22
MA-3 / MA-20 / MA-30
T3 for
MS-4 / MS-6 / MS-8
MA-6 / MA-10
D.C. and A.C. "brushless" motors are included in the EExdIIC Series, incorporating opti*** of tachometer, resolver and parking brake fitted internally. |
AC Servo motors
MA Series
• The short mechanical time c***tant makes it ideal for control operati***.
• An extremely short electrical c***tant provides high peak torque at high speed.
• A high "theoretical" acceleration gives an extremely fast resp***e time.
• High stall torque due to the absence of commutator bars.
• Low thermal resistance provides low working temperatures.
• High power to weight ratio, ideal for manipulator mounted motors.
• Air gap design, ***all diameter and short length.
• For many applicati*** a separate position sensor is not required, the resolver can be used for deriving a position feed back signal as well as speed/current information. |
AC Servo motors
MSA Series
• Very compact.
• Reduced diameter and length.
• Axial magnetic flux.
• Low cogging torque.
• Excellent torque/weight/volume ratio. | |  download Technical Specificati*** |
|
AC Servo motors
BL 40 / 50 / 70 Series
The BL Series incorporates the option of a fail-safe holding brake within the structure of the motor. Brake option is not ***ailable in a short length version. |
| |  download Technical Specificati*** |
|
AC Servo motors
BL 110 / 140 / 190 Series
The BL Series are synchronous electrical servomotors, with 3 winding phases, supplied with Sinusoidal or Trapezoidal current w***e forms. The Feed-Back devices that produce the synchronization signal and speed (position, also in the Sinusoidal case), are Resolver (BLS Series) or Hall effect devices (BLT Series).
This "BRUSHLESS" technology provides:
• High dynamic resp***e.
• Full speed condition, not limited by the "Brush Sparking effect".
• High thermal and dynamic characteristics, because of the motor's windings which are located in the stators.
• Very low maintenance.
• Connection box with four ***ailable positi*** from the standard c***truction. |
AC Servo motors
BLS / BLT 48VDC Series
Text description coming soon |
| | download Technical Specificati*** |
|
AC Servo motors
MLL Series
New M***ilor series with elongated configuration and slotless stator that prevents reluctance variation in the rotor movement, which translates as:
• No cogging torque
• Minimal ripple torque
• Almost no losses in magnets
• Increased efficiency
• Possibility for high-speed rotation |
| |  download Technical Specificati*** |
|
AC Servo motors
BF Series WASHDOWN M***ilor Motor
• ***ooth Edges
• Stainless Steel Housing and Shaft
• IP 67
Synchronous electrical servomotors with 3 winding phases, supplied with sinusoidal current w***e forms. The feed- back device is a resolver (BFS Series) |
| |  download Technical Specificati*** |
|
|
|
|
|
|
|
