希而科贸易（上海）有限公司-德国Silkroad24 GmbH 中国***

联系人：张敏 （业务部销售经理）

TEL:13585754584  021-58375543-829
FAX:021-61179684
EMAIL:zm@
***:1784691511
MSN:zhangsir_goal@

希而科优势代理德国***AC Europe Ltd.电动缸 执行器 控制器 放大器抓手

产品系列：

Controllers and Amplifiers

***AC supplies a range of single and multi-axis controllers together with stand alone amplifiers and stepper driven drivers. Controllers are programmed by mnemonic type command instructi*** via an RS-232 interface into NVRAM and allows code to be stored in non-volatile RAM, which is then used to enable movements to be made in three different modes. They require no supplementary software.

NEW LAC-15 / LAC-20 Single or Dual Axis Controller
Single or double axis brushless controller. Easy expansion to multi-axis. It comes with a built-in amplifier. Modes: Position Velocity Force Step/Direction 1 Port per axis RS232 up to 115200 bps CAN bus 2.0B up to 1MB/s
LAC-1 Single Axis Controller
The LAC-1 is a single axis controller with eight TTL I/O channels, three analog I/P channels and RS232 interface. It comes with a built-in amplifier. Modes: Position Velocity Force
LAC-25 Dual Axis Controller
Dual axis controller with four opto-isolated I/O channels, two analog I/O channels and RS232 interface. The LAC-25 can be used to control either a single linear and rotary actuator or alternatively two independent linear actuators. It is also necessary for grippers. It comes with a built-in amplifier. Modes: Position Velocity Force Gearing
LAC-45 Four Axis Controller
Independent or coordinated 4 axis motion, 8 I/P, 8 O/P, Opto-isolated general purpose I/O’s, 6 analog I/P, 4 analog O/P, RS232 Interface. It comes with a built-in amplifier. Modes: Position Velocity Force Gearing
LAB-5 Single Axis Brushless Controller
Single axis brushless controller, built-in amplifier. 4 input, 4 output, Opto-isolated general purpose I/O, 2 analog I/P, 2 analog O/P, RS-232 interface. Modes: Position Velocity or Continuous Force
LAA-5 Single Axis Amplifier
A stand alone single axis amplifier which can be used in conjunction with any proprietary controller. It provides +/-10 Volt I/P, 3 Amp O/P.
LAD-1 ***art Driver
The LAD1 is used to convert stepper inputs to 3 Amp servo output. This is particularly useful wherever a ***AC unit is retrofitted to or integrated into a stepper-driven machine. RS232 Interface.
MIO E-8/8 [MIO 16-R2] Channel I/O Expansion Module
Expansive I/O modual, 8 input, 8 output, Opto-isolated general purpose I/O. If more I/O channels are required, then the MIO can be linked to either the LAC1 or LAC25 to give 16 I/O channels. Please note:This replaces the MIO16-R2
Built-in Controller	首页 公司概况 供应产品 公司资讯 企业黄页 工商资料 联系我们 希而科贸易(上海)有限公司电话：021-57559659传真：021-57559659联系人：康经理 18721676936 地址：上海市奉贤区奉金路469号4幢3层2435室主营产品：工控仪表.机电产品.备品备件 Copyright © 2025 版权所有: 产品网店铺主体：希而科贸易(上海)有限公司 免责声明：以上所展示的信息由企业自行提供，内容的真实性、准确性和合法性由发布企业负责。产品网对此不承担任何保证责任。