日本KETT品牌LZ-200J涡磁统计打印手提型涂层检测仪本器兼备电磁式与涡电流式功能，而且是内藏打印机的便携式膜厚计。可迅速对应磁性金属上及非磁性金属上的各式各样被膜厚度之测量。
具备统计计算功能，按下操作键即可求出平均值、标准偏差、***大值、***小值。
校正、记忆功能、上下限设定功能等一应俱全。
日本KETT品牌LZ-200J统计打印手提型涂层检测仪
测量方式 涡磁两用式
测量对象 磁性金属上非磁性被膜及非磁性金属上绝缘被膜
测量范围 磁：0~1500μm 涡：0~800μm
测量精度 磁：15μm以下&plu***n;0.3μm；15μm以上&plu***n;2% 涡：50μm以下&plu***n;1μm；50μm以上&plu***n;3%
分辨率 100μm以下：0.1μm；100μm以上：1μm
显示方式 LCD数位荧幕显示 61(D)x29(H)mm
***小测量面积 5x5mm
校正记忆功能 8组，任何时间开机不需重新校正
界限值功能 可任意设定上、下限判别功能，超过范围时以音响警示
资料记忆数 3000点
统计功能 测量次数、平均值、***大值、***小值、标准差值
测量功能 单点测试、连续扫瞄测试，可测试膜厚分布变化
打印机 24 character内藏感热式打印机，自动统计记录，纸宽58mm
电 源 AC110V/60Hz或主机单3号电池x6，打印机单3电池x4
尺 寸 120(W)x250(D)x55(H)mm
重 量 约1.1kg
测量方式 内藏测头单点测试
测量单位 公、英制可任意切换（μm/mils）
附 属 品 铁素材、校正用标准片、电池、携带套、操作说明书、曲面固定器、测头、AC插头
The LZ-200J Dual-Type Coating Thickness Tester is a portable coating thickness tester equipped with electromagnetic and eddy-current testing methods and an internal printer. This unit can quickly and easily handle coating thickness measurements of various types of coatings on iron and steel of non-ferrous substrates. Plus, this unit is equipped with many valuable functi*** such as calibration, memory, limit setup, and a statistical calculation function that, at the press of a button, allows you to find the ***erage value, standard deviation, and largest and ***allest values measured.
Specificati*** LZ-200J
Measurement Method Electromagnetic induction/Eddy-current
Applicati*** Non-magnetic coating on iron and steel (ferrous) substrates and Insulating coatings on non-ferrous substrates
Measurement Range Electromagnetic: 0-1500µm or 60.00mils
Eddy-current: 0-800µm or 32.00mils
Measurement Precision Electromagnetic: Under 15µm: &plu***n;0.3mm, 15µm or greater: &plu***n;2%
Eddy-current: Under 50µm: &plu***n;1µm, 50µm or greater: &plu***n;3%
Resolution 0.1µm (less than 100µm), 1.0µm (100µm or greater)
Statistical Functi*** Number of measurements, ***erage value, Standard deviation, Maximum value, Minimum value, Block numbers
Probe One-point contact fixed pressure (LEP-J, LHP-J)
Display Format Digital (LCD, ***allest displayed unit 0.1mm)
Output RS-232C interface (tran***ission speed-2400bps)
Power Source AC100V (50/60Hz) or 1.5 ("AA" size Alkaline batteries) x 6 (main unit), Printer ("AA" size Alkaline batteries) x 4
Dimensi*** & Weight 120(W)x250(D)x55(H)mm, 1.0kg Shipment 2.5kg
Accessories Calibration plate, Iron substrate, Batteries (1.5V, "AA" size Alkaline), Probe adapter, AC adapter, Printer paper, Carrying case
Opti*** Data Management Software "McW***e Series" and "MultiProp"
(McW***e Series and MultiProp are products of CEC Co.)
测量方式 涡磁两用式
测量对象 磁性金属上非磁性被膜及非磁性金属上绝缘被膜
测量范围 磁：0~1500μm 涡：0~800μm
测量精度 磁：15μm以下&plu***n;0.3μm；15μm以上&plu***n;2% 涡：50μm以下&plu***n;1μm；50μm以上&plu***n;3%
分辨率 100μm以下：0.1μm；100μm以上：1μm
显示方式 LCD数位荧幕显示 61(D)x29(H)mm
***小测量面积 5x5mm
校正记忆功能 8组，任何时间开机不需重新校正
界限值功能 可任意设定上、下限判别功能，超过范围时以音响警示
资料记忆数 3000点
统计功能 测量次数、平均值、***大值、***小值、标准差值
测量功能 单点测试、连续扫瞄测试，可测试膜厚分布变化
打印机 24 character内藏感热式打印机，自动统计记录，纸宽58mm
电 源 AC110V/60Hz或主机单3号电池x6，打印机单3电池x4
尺 寸 120(W)x250(D)x55(H)mm
重 量 约1.1kg
测量方式 内藏测头单点测试
测量单位 公、英制可任意切换（μm/mils）
附 属 品 铁素材、校正用标准片、电池、携带套、操作说明书、曲面固定器、测头、AC插头
The LZ-200J Dual-Type Coating Thickness Tester is a portable coating thickness tester equipped with electromagnetic and eddy-current testing methods and an internal printer. This unit can quickly and easily handle coating thickness measurements of various types of coatings on iron and steel of non-ferrous substrates. Plus, this unit is equipped with many valuable functi*** such as calibration, memory, limit setup, and a statistical calculation function that, at the press of a button, allows you to find the ***erage value, standard deviation, and largest and ***allest values measured.
Specificati*** LZ-200J
Measurement Method Electromagnetic induction/Eddy-current
Applicati*** Non-magnetic coating on iron and steel (ferrous) substrates and Insulating coatings on non-ferrous substrates
Measurement Range Electromagnetic: 0-1500µm or 60.00mils
Eddy-current: 0-800µm or 32.00mils
Measurement Precision Electromagnetic: Under 15µm: &plu***n;0.3mm, 15µm or greater: &plu***n;2%
Eddy-current: Under 50µm: &plu***n;1µm, 50µm or greater: &plu***n;3%
Resolution 0.1µm (less than 100µm), 1.0µm (100µm or greater)
Statistical Functi*** Number of measurements, ***erage value, Standard deviation, Maximum value, Minimum value, Block numbers
Probe One-point contact fixed pressure (LEP-J, LHP-J)
Display Format Digital (LCD, ***allest displayed unit 0.1mm)
Output RS-232C interface (tran***ission speed-2400bps)
Power Source AC100V (50/60Hz) or 1.5 ("AA" size Alkaline batteries) x 6 (main unit), Printer ("AA" size Alkaline batteries) x 4
Dimensi*** & Weight 120(W)x250(D)x55(H)mm, 1.0kg Shipment 2.5kg
Accessories Calibration plate, Iron substrate, Batteries (1.5V, "AA" size Alkaline), Probe adapter, AC adapter, Printer paper, Carrying case
Opti*** Data Management Software "McW***e Series" and "MultiProp"
(McW***e Series and MultiProp are products of CEC Co.)