材质 | cca | 产地 | jiangsu |
规格 | 3*30-12*150 | 用途 | 电气导电排、汇流排、母线 |
铜包铝母线-铜包铝排母线
是一种用纯铝排作为母线导电排的排芯,用一定厚度的铜板材作为母线导电排的外层导体及安装接触面,构成铜包铝母线导电排。
铜包铝母线导电排不仅可以代替纯铜排母线导电排,也可以应用在其他用纯铜排作为电流传输场合下,用铜包铝排代替原来的铜排,有效降低母排成本50%左右。
铜包铝母线-铜包铝排产品特点:
1、用铜包铝排代替原来的铜排,有效降低母排成本50%左右
2、体积比17-20%,比重3.7,含铜量40%
3、导电率达到纯铜排的85%左右
4、铜铝界面完全结合,剪切、折弯、冲孔、铜铝不分层,满足铜排加工、使用的操作要求,可以替代铜排。
5、接触电阻、抗腐蚀能力、表面性能和铜排完全一样。
6、机械性能好,抗拉强度、表面硬度比铝排高得多,接近铜排。
7、比重小、重量轻,使用安装更方便,使用寿命长。
8、铜铝之间在各种环境温度中达到***性的原子晶间结合,并且铜层(镀锡、锌层)分布均匀,不存在物理缺陷。
铜包铝母线-铜包铝排使用参考
如原设备采用的是纯铜排型号为100×10(载流量为1860A)。铜包铝排导电率为85%IACS,可以将铜包铝排的截面积适当放大增加1,可以选用100×12的铜包铝排(载流量为2040A)。
铜包铝母线-铜包铝排参数
长度:2~6 m
密度:3.7 g/cm3
抗拉强度:110 MPA
延伸率:软态15 % ;硬态1.5 %
含铜重量比:40 %
含铜体积比:17-22%
相对导电率:85 %
同质量长度比:2.4
copper clad aluminum busbar can instead of copper busbar
copper clad aluminum busbar
Good conductivity: performance of copper clad aluminum busbar whose volume ratio is 17%. Its current capacity is 85% of pure copper busbar. Its length is 2.3-2.5 times and its desity is 38%-42% ofpure copper busbar with the same size and weight.Good mechanical property:it is of excellent tensile strength,flexibility and extensibility.
Firm extensity and productivity:under special heat treatment, this product is of good plasticity,it can be punched,sheared and bended.
In order to improve its anti-corrosion property,tin or zine can be coated on the surface of st choice:s***e copper material,low production cost.With the same current capacity and length,the cost of copper clad aluminum busbar can decreased to 30%-40%,compared with pure copper busbar.