西格林siegling耐高温输送带分为普通耐热带和强力耐热输送带，普通耐热带强力层为涤棉帆布（CC56），强力耐热带强力层为EP（具体又分为EP100型、EP150型，EP200型、EP250，EP300型、EP350型，EP400型、EP450型、EP500型等）。 用途：主要用于冶金、建筑等行业，输送烧结矿、焦炭、水泥熟料等高温物料，物料温度不超过800℃，带面温度不超过220℃的条件下使用。 特性：采用三元乙丙橡胶为覆盖层，骨架材料采用国内专用的耐高温帆布，独特的配方设计，解决了因乙丙橡胶饱和度高，粘合性差，层间附着力低的关健问题。具有带体轻，寿命长（约2-4倍），耐热性能好的特点。 执行《输送带具有橡胶或塑料覆盖层的普通用途织物芯输送带》标准， 本标准采用了国际标准草案ISO/FDIS14890-1999标准 耐热输送带是由多层橡胶棉帆布（涤棉布）或者聚酯帆布上下覆有耐高温或耐热橡胶、经高温硫化粘合在一起，适合输送175℃以下热焦碳、水泥、熔渣和热铸件等。 1、规格同普通输送带。 2、产品执行HG2297-92标准。 3、耐热皮带可分为四种型号： Ⅰ型：可耐不大于100℃试验温度，***高短时运行温度150℃，代号T1。 Ⅱ型：可耐不大于125℃试验温度，***高短时运行温度170℃，代号T2。 Ⅲ型：可耐不大于150℃试验温度，***高短时运行温度200℃，代号T3。 Ⅳ型：可耐不大于175℃试验温度，***高短时运行温度250℃，代号T4。 物理性能： 强度 老话后与老化前之差（IRHD） 23 老化后的***大值（IRHD） 88 拉伸 强度 性能变化率降低，% 40 老化后的***低值，MPa 5 扯断 伸长度 性能变化率，% 60 老化后的***低值，% 150 耐高温钢网输送带是用钢丝纵横编制而成，钢网表面镀锌或镀铜，在钢网上下表面覆盖橡胶层，运输高温物料过程中，整体表面不脱层，使用性能比分层式耐热输送带更可靠。 型号：SN400;SN600
sieglingHigh temperature resistant conveyor belt is divided into general and powerful heat conveyor belt, general heat-resistant cotton canvas with a powerful layer (CC56), a strong heat-resistant layer with a strong EP (also divided into type EP100, EP150 type, EP200-type, EP250, EP300 type, EP350 type, EP400 type, EP450 type, EP500 type, etc.). Uses: mainly used in metallurgy, c***truction and other industries, transport sinter, coke, cement clinker and other high-temperature materials, the material temperature does not exceed 800 ℃, with a surface temperature does not exceed 220 ℃ under the conditi*** of use. Features: The EPDM rubber cover, frame materials, high temperature using a dedicated domestic canvas, a unique formula designed to address the ethylene-propylene rubber due to saturation, poor adhesion, low adhesion between layers of the key issues . With a body with a light, long life (about 2-4 times), and good heat resistance. Implementation of "conveyor belt with rubber or plastic cover of the general-purpose fabric conveyor belt" standard, the standard adopts the International Standard Draft ISO/FDIS14890-1999 standard multi-layer heat-resistant rubber conveyor belt is a cotton canvas (cotton cloth), or poly esters covered with canvas upper and lower temperature or heat-resistant rubber, bonded together by heat curing, for delivery the following 175 ℃ heat coke, cement, slag and hot castings. 1, the specification with common conveyor belt. 2, product implementation HG2297-92 standard. 3, heat-resistant belt can be divided into four types: Ⅰ type: can withstand no more than 100 ℃ test temperature, the maximum short-term operating temperature of 150 ℃, code-named T1. Ⅱ: can withstand no more than 125 ℃ test temperature, the maximum short-term operating temperature of 170 ℃, code T2. Ⅲ: can withstand no more than 150 ℃ test temperature, the maximum short-term operating temperature of 200 ℃, code-named T3. Ⅳ: can withstand no more than 175 ℃ test temperature, the maximum short-term operating temperature of 250 ℃, code-named T4. Physical properties: strength goes, the difference before after aging (IRHD) 23 maximum after aging (IRHD) 88 Tensile strength properties reduce the rate of change,% after age 40 the minimum value, MPa 5 tensile elongation properties of the rate of change, %, the lowest value after aging 60,% 150 high temperature wire steel mesh conveyor belt is compiled aspect, the surface of galvanized steel or copper network, covering the lower surface of the steel line rubber layer, the transport process of high temperature materials, the overall surface no delamination, the use of heat-resistant conveyor belt-type layer performance score is more reliable. Model: SN400; SN600
