MITSUBOSHI (三星)3V、5V、8V型高速防油三角带

MITSUBOSHI

 

MITSUBOSHI

Toothed belt diagram
 
 
 
 
M, A, B, C, D, E profile chart
 SPZ, SPA, SPB, SPC profile chart
 3V, 5V, 8V Timing Belts
 
 
 
MITSUBOSHI

Model Features Overview
 MITSUBOSHIM type
Bandwidth of 10.0mm, 5.5mm with high
 Rubber materials
 
 
 MITSUBOSHIA type
Bandwidth of 12.5mm, 9.0mm with high
 Rubber material, a cutting-edge teeth models, there are joint models
 
 
 MITSUBOSHIB type
Bandwidth, 16.5mm, 11.0mm with a high
 Rubber material, a cutting-edge teeth models, there are joint models
 
 
 MITSUBOSHIC type
Bandwidth, 22.0mm, 14.0mm with a high
 Rubber material, a cutting-edge teeth models, there are joint models
 
 
 MITSUBOSHID type
Bandwidth, 31.5mm, 19.0mm with a high
 Rubber material, a joint model
 
 
 MITSUBOSHIE type
Bandwidth, 38.0mm, 25.0mm with a high
 Rubber material, a joint model
 
 
 MITSUBOSHISPZ type
Bandwidth of 9.5mm, with 8.0mm high
 Rubber material, a cutting-edge model with teeth
 
 
 MITSUBOSHISPA type
Bandwidth, 12.7mm, 10.0mm with a high
 Rubber material, a cutting-edge model with teeth
 
 
 MITSUBOSHISPB type
Bandwidth, 16.3mm, 13.0mm with a high
 Rubber material, a cutting-edge model with teeth
 
 
 MITSUBOSHISPC type
Bandwidth, 22.0mm, 18.0mm with a high
 Rubber material, a cutting-edge model with teeth
 
 
 MITSUBOSHI3V type
Bandwidth of 9.5mm, with high 8.0mm, angle 40o
 Rubber material, a cutting-edge teeth models, there are joint models
 
 
 MITSUBOSHI5V type
Bandwidth of 16.0mm, with a high 13.5mm, angle of 40o
 Rubber material, a cutting-edge teeth models, there are joint models
 
 
 MITSUBOSHI8V type
Bandwidth of 25.5mm, with a high 23.0mm, angle of 40o
 Rubber material, a cutting-edge teeth models, there are joint models
 
MITSUBOSHI

Physical picture
 
 
 
MITSUBOSHI standard model: M, A, B, C, D, E
 MITSUBOSHI trimming teeth models: AX, BX, CX
 

 
 
MITSUBOSHI standard joint model: RA, RB, RC, RD, RE
 MITSUBOSHI trimming a tooth joint model: RAX, RBX, RCX
 

 
 
MITSUBOSHI Standard Model: SPZ, SPA, SPB, SPC, 3V, 5V, 8V
 MITSUBOSHI trimming teeth models: SPZX, SPAX, SPBX, SPCX, 3VX, 5VX
 

 
 
MITSUBOSHI joint joint model: R3V, R5V, R8V
 MITSUBOSHI trimming a tooth joint model: R3VX, R5VX
 

 
 
 
MITSUBOSHI

Glossary
 * Refers to the cutting edge with teeth on both sides of the belt is made by mechanical cutting, relative to the standard model, it has clear edges and corners, while below the belt with inlaid teeth.
* Joint group is trimming more than standard models or models side by side with tooth bonding with the formation of the machine, joint group belt side by side by a combination of 2,3,4,5,6 belts, if necessary, please contact our Business Unit.