| Optibelt同步带 |
| Optibelt OMEGA HP欧皮特免维护高性能同步带 |
|
详细介绍:
优点： l 高精度，准确的同步性 l 可以承受零下30摄氏度到100摄氏度的温度范围 l 使用寿命是标准同步带的18倍 l 极低的噪音 l 低轴承负荷 l 免维护 l 更强的防磨损特性 l 更高的功率传递，高达98%，从而降低传动尺寸与成本 l 功率传递能力是标准同步带的2倍 l 耐油 l 导电性（防静电）
构造
顶层 耐用而又不失活的顶层可保护张力线不受外在的影响，此外，聚氯丁二烯材料可以抵抗矿物油和潮 湿的侵蚀，并抵御摩擦产生的磨损。 张力线 张力线由对转缠绕的特殊玻璃纤维组成，成对间隔而成，其特点是高抗拉强度，极好的灵活性和极 低的延展性. 带齿 带齿由一种新型材料与芳族聚酸胺纤维混合制成，可保证较高的切变强度，其设计有利于更好与轮 齿啮合，将摩擦降至最低，带齿顶端的凹痕可以减轻工作噪音。
标准特性和特殊构造 作为一种产品标准，所有的Optibelt OMEGA HP同步带都可在一定程度上耐油、耐热、耐寒、抵御热 带条件和臭氧，因此它们基本不受天气的影响，无须特殊的标记说明。 耐油 耐油可防止矿物油及油脂造成的损害，只要这些物质不是长久或大范围与同步带接触。 耐温 同步带可承受的环境温度范围大约是零下30摄氏度至100摄氏度，超过这个范围将引起过早老化和脆 化，使皮带过早损坏。 导电性（防静电） 导电性可让静电安全导出，同步带传动时产生的电荷可能非常高，如果没有导电性的话，产生的火 花就可能造成燃火的危险。
性能对比
当今的高性能传动提出了对顶级传动带的需求，更长的使用寿命、更高的性能、更低的更换频率、 更少的材料和系统成本-新一代Optibelt同步带可同时满足所有这些要求。 它就是：Optibelt OMEGA HP 作为整个系列中一项出色的新产品，它的优势在于 长达18倍的使用寿命 性能提高2倍 系统成本节省达40%而性能依旧卓越 =最佳传动配置与最大程度的利用 由于齿形独特，Optibelt OMEGA HP高性能同步带适用于所有具有曲线轮齿的标准商用同步带轮，无需特殊带轮。 Optibelt OMEGA HP其名称是自身优势的最佳说明： O-optimised tooth section(最佳带齿截面) M-made in Germany(德国制造) E-enormous performance potential(巨大的工作潜能 ） G-greatly reduced overall of application(应用范围广) HP-high performance(高性能) Optibelt OMEGA HP设计工程师的首选
推荐应用领域：纺织机械、机床、压缩机、印刷机械、木工机械等
标准宽度： 类型 3M HP：6毫米，9毫米，15毫米 类型 5M HP：9毫米，15毫米，25毫米 类型 8M HP：20毫米，30毫米，50毫米，85毫米 类型 14M HP：40毫米，55毫米，85毫米，115毫米，170毫米
定购示例： 同步带：Optibelt OMEGA HP 1200-8M*20 1200 =1200毫米长度 8M HP =截面和构造 20 =20毫米带宽 |
Optibelt belt
Optibelt OMEGA HP high performance maintenance-free belt Optibelt
Details:
Optibelt belt expert in the industry enjoys a great reputation, people generally believe it is a powerful and durable, "Optibelt OMEGA" products on behalf of extremely high quality standards, is also adding a high-performance timing belt, faster, stronger, more compact - this is the new model Optibelt OMEGA HP on their own interpretation, a response to the most demanding timing belt.
Advantages:
l high-precision, accurate synchronization
l can withstand 100 degrees Celsius to minus 30 degrees Celsius temperature range
l timing belt service life is 18 times the standard
l Very low noise
l Low bearing load
l Maintenance-free
stronger anti-wear properties of l
l higher power delivery, up to 98%, thereby reducing size and cost of transmission
l power transfer capacity is 2 times the standard belt
l oil
l conductive (antistatic)
Structure
Top
Durable without losing tension live wire from the top to protect the external influences, in addition, polychloroprene materials resistant to mineral oil, and wave
Wet erosion, and protect against friction wear.
Tension line
Tension wire transfer from the winding of the special glass fibers, made of paired interval, which is characterized by high tensile strength, excellent flexibility and very
Low ductility.
With teeth
With teeth from a new material with the aromatic polyamide fiber blend, can guarantee a high shear strength, and its design is conducive to a better wheel
Gear meshing, the friction to a minimum, with the top notch gear can reduce operating noise.
Standard features and special construction
As a product standard, all Optibelt OMEGA HP belt can be to some extent, oil, heat, cold, heat resisting
With conditions and ozone, so they basically are not the weather, no special marks instructions.
Oil
Oil and mineral oil and grease to prevent damage, as long as these substances are not long or wide range of contacts with the timing belt.
Temperature
Belt can withstand ambient temperature range of approximately minus 30 degrees Celsius to 100 degrees Celsius, more than this range will cause premature aging and fragile
, So that the belt prematurely.
Conductive (antistatic)
Conductivity allows to export static safety, timing belt generated when the charge can be very high, if not conductive, then the resulting fire
Flower lights the fire may cause danger.
Performance comparison
Today's high performance transmission belt made of top-level requirements, longer life, higher performance, lower replacement frequency,
Less the cost of materials and systems - a new generation of Optibelt belt can meet all these requirements.
It is: Optibelt OMEGA HP
As a whole series of great new products, it has the advantage of
Up to 18 times the life
Performance increased by 2 times
System cost savings of up to 40% while the performance is still excellent
= Optimum transmission configuration and maximum use of
As the tooth's unique, Optibelt OMEGA HP high-performance timing belt for all with a standard curve of commercial tooth timing belt pulleys, no special pulley.
Optibelt OMEGA HP whose name is the best description of their advantages:
O-optimised tooth section (the best section with teeth)
M-made in Germany (Germany)
E-enormous performance potential (huge potentials for work)
G-greatly reduced overall of application (application wide)
HP-high performance (high performance)
Optibelt OMEGA HP design engineers preferred
Recommended applications: textile machinery, machine tools, compressors, printing machinery, woodworking machinery
Standard width:
Type 3M HP: 6 mm, 9 mm, 15 mm
Type 5M HP: 9 mm, 15 mm, 25 mm
Type 8M HP: 20 mm, 30 mm, 50 mm, 85 mm
Type 14M HP: 40 mm, 55 mm, 85 mm, 115 mm, 170 mm
Order Example:
Timing: Optibelt OMEGA HP 1200-8M * 20
1200 = 1200 mm length
8M HP = cross-section and construction
Bandwidth of 20 = 20 mm