| 型号 | Lanco 1725 | 品牌 | LUBRIZOL |
| 包装规格 | 20KG |
Product type
Applicati***
Performance
Incorporation
Reference: 1/1/030GB / Issued: 01/05
PTFEmodified polyethylene wax, micronized and
classified
• Can and coil coatings
· Powder and industrial coatings
· Wood coatings and UVcuring coatings
· Overprint varnishes, flexo and gr***ure inks
based on:
· Acrylics
· Alkyds
· Polyurethanes
· N/C and N/C combination finishes
· Epoxies
· Polyesters
· Hybrid systems
Lanco TF 1725 and TF 1725 EF are effective additives for
increasing abrasion resistance and slip. The combination of
PTFE and polyethylene wax does not tend to agglomeration
and is thus very easily dispersible.
The following properties are displayed:
· Very good surface ***oothness through combination of pure
PTFE and hard polyethylene wax
· High scratch resistance and hardness
· Good metalmarking resistance through reduction of coefficient
of friction
· Good mar resistance
Lanco TF 1725 EF is the finer grade, for use in thin film
systems.
Lanco TF 1725 and TF 1725 EF are very easily dispersible.
They can be incorporated using normal stirrers. In very low
viscosity systems high shear mixers such as dissolvers or bead
mills may be required.
Addition levels
Typical properties
For improvement of surface properties such as slip and scratch
resistance, addition rates of 0.05 2.0 % Lanco TF 1725 or TF
1725 EF are recommended, based on total formulation.
If addition rates of over 2% are used in coatings where repair
or overprinting are necessary, intercoat adhesion should be
checked.
TF 1725 TF 1725 EF
Appearance freeflowing white powder
Chemical type PTFE / polyethylene wax
Particle size, max. (µm) Dv50 6 5
(Cilas Laser Diffraction) Dv90 14 10
Melting point PE (ºC)
Density (g/cm3)
Acid number (mg KOH/g)
Hardness (ASTM D1321)
102
1.01
<1
102
1.01
<1
2
2
Packaging and
storage
Regulatory status
Lanco TF 1725 and TF 1725 EF are packed in paper sacks.
Sacks should be stored on pallets in dry, enclosed areas. A
storage temperature of 30°C should not be exceeded.
Shelf life: at least 12 months from date of shipment. After this,
product should be tested before use.
Lanco TF 1725 and TF 1725 EF complies with FDA regulation
21 CFR §175.300.
All components are listed on / in compliance with the US TSCA
and European EINECS inventories. Contact Lubrizol for
additional information.
Copyright 2005 Noveon Inc. All rights reserved. Reproduction in whole or part in any form or medium without the express written permission is prohibited.
LANCO is a trade mark, the property of The Lubrizol Corporation.
The information contained herein is believed to be reliable, but no representati***, guarantees or warranties of any kind are made as to its accuracy, suitability for
particular applicati*** or the results to be obtained therefrom. The information is based on laboratory work with ***allscale equipment and does not necessarily indicate
end product performance. Because of the variati*** in methods, conditi***, and equipment used commercially in processing these materials, no warranties or
guarantees are made as to the suitability of the products for the applicati*** disclosed. Fullscale testing and end product performance are the resp***ibility of the user.
Noveon shall not be liable for and the customer assumes all risk and liability of any use or handling of any material beyond Noveon’s direct control. THE SELLER
MAKES NO W ARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED W ARRANTIES OR MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE. Nothing contained herein is to be c***idered permission, recommendation, nor as an inducement to practice any patented invention without
permission of the patent owner. IN NO EVENT SHALL SELLER BE LIABLE FOR ANY INCIDENTAL, C***EQUENTIAL OR SPECIAL DAMAGES.
In addition to that we refer to our General Terms and Conditi*** of Sale and Delivery.