进口电动刀型闸阀|山西

进口电动刀型闸阀
进口电动刀型闸阀 - 电动刀型闸阀的工作性能：
电动刀型闸阀具有结构简单紧凑、设计合理、轻型节材,密封可靠、操作轻便灵活、体积小、通道流畅、流阻小、重量轻、易安装、易拆卸等优点，可在工作压力1.0MPa-2.5MPa，使用温度-29-650℃情况下正常工作。刀型闸阀其闸板具有剪切功能，可刮除密封面上的粘着物，自动清除杂物，不锈钢闸板可防止腐蚀引起的密封泄漏。Electric knife gate valve has a simple and compact structure, reasonable design, lightweight materials, sealing, reliable, light and flexible operation, ***all size, channel flow, flow resistance, light weight, easy to install, easy to disassemble, etc., can work pressure 1.0MPa -2.5MPa, -29-650 ℃ operating temperature under normal working conditi***. Knife gate valve has cut its function, can scrape the sealing surface of the adhesive material, the debris is cleared automatically seal leakage, stainless steel gate to prevent corrosion.
进口电动刀型闸阀 - 电动刀型闸阀的工作介绍：
    电动刀型闸阀的启闭件是闸板，闸板的运动方向与流体方向相垂直，手动刀型闸阀只能作全开和全关,不能作调节和节流。闸板有两个密封面,***常用的模式闸板阀的两个密封面形成楔形、楔形角随阀门参数而异,通常为50,楔式刀型闸阀的闸板可以做成一个整体，叫做刚性闸板；也可以做成能产生微量变形的闸板,以改善其工艺性,弥补密封面角度在加工过程中产生的偏差,这种闸板叫做弹性闸板 刀型闸阀关闭时,密封面可以只依靠介质压力来密封,即依靠介质压力将闸板的密封面压向另一侧的阀座来保证密封面的密封,这就是自密封.大部分刀型闸阀是采用强制密封的,即阀门关闭时，要依靠外力强行将闸板压向阀座,以保证密封面的密封性。其可分为上下两部分，上半部分为气动执行器，下半部分为阀门。 
Imported electric knife gate valve - electric knife gate valve job description:
???? Electric knife gate valve for opening and closing parts, the direction of movement of the fluid direction perpendicular to the gate, the manual knife gate valve can only be fully open and fully closed, can not be adjusted and the throttle. Ram has two sealing surface, the two sealing surfaces of the most common mode of gate valve forming wedge, wedge angle with the valve parameters vary, usually 50, wedge type knife gate valve can be made into a whole, called rigid gate; when also be made to produce ***all quantities of deformation gate in order to improve its process, to make up the sealing surface angle deviati*** arising during processing, this gate is called the flexible gate knife gate valve is closed, the sealing surface You can only rely on media pressure to seal, which rely on the sealing surface of the medium pressure to ram pressure to the other side of the seat to ensure the sealing surface, which is self-sealing. most of knife gate valve is sealed by force, that is, when the valve is closed, to rely on external pressure to force the gate valve to ensure the tightness of the sealing surface. It can be divided into two parts, the upper part of the pneumatic actuator, the valve into the lower half.
进口电动刀型闸阀 - 电动刀型闸阀的安装使用：
1.安装前须检查阀门腔内和密封面等部位，不允许有污物或砂粒附着； 
2.各连接部位螺栓,要求均匀拧紧； 
3.检查填料部位要求压紧，既保证填料的密封性，也要保证闸板开启灵活； 
4.用户在安装阀门前，必须校对阀门型号，连接尺寸及注意介质流向，保证与阀门要求一致性； 
5.用户在安装阀门时，必须预留阀门驱动的必要空间； 
6.驱动装置的接线须按线路图进行； 
7.刀型闸阀必须定期***，不得随意碰撞及挤压，以免影响密封。 
Imported electric knife gate valve - electric knife gate valve is installed using:
1. Before installing the valve should be checked c***ity and sealing surfaces and other parts, does not allow dirt or sand attached;
2. The joints bolts evenly tighten requirements;
3. Check the packing requirements of pressed parts, both to ensure the packing seal, but also to ensure the gate open and flexible;
4. User Before installing the valve, the valve must be proofread model, connection size and attention to the medium flow, to ensure c***istency with the requirements of the valve;
5. user when installing the valve, the valve must be set aside space necessary drive;
6. The drive circuit wiring diagram shall;
7. knife gate valve must be regularly maintained, not free collision and extrusion, to ***oid affecting the seal.
进口电动刀型闸阀参数：
外型结构:凸耳、梅花、圆型                           
公称通径范围：DN50-DN1200
公称压力范围：国标、美标、日标、德标、英标
材质：铸钢、不锈钢
闸板材质： 2Cr13、201、304、316、316L
适用温度：≤300℃
泄漏等级：D级（1×DNmm3/s）
连接形式：法兰、对夹
阀座密封圈：***橡胶、三元乙丙橡胶、氟橡胶、堆焊2Cr13、不锈钢、硬质合金
填料密封：含油四氟盘根
适用介质：适用于矿山电厂的选煤、排渣、食品、造纸、医药、化工等管路上，接通或截断管路中的水泥浆、金矿粉、矿砂、炉渣、煤泥、纸浆、木浆、尾矿、纤维、粉尘、***处理污水、沉淀池、沥青、料仓出口等介质。
Imported electric knife gate valve parameters:
Overall structure: lug, plum, round
Nominal diameter range: DN50-DN1200
Nominal pressure range: GB, American standard, Japanese standard, German standard, British standard
Material: steel, stainless steel
Gate Material: 2Cr13,201,304,316,316L
Applicable temperature: ≤300 ℃
Leakage class: D Grade (1 × DNmm3 / s)
Connection: Flange, Wafer
Seat seal: NBR, EPDM, Viton, welding 2Cr13, stainless steel, carbide
Packing: oil PTFE packing
Medium: suitable for mining coal preparation plant, slag, food, paper, pharmaceutical, chemical and other pipeline, connect or disconnect the line of grout, gold powder, ore, slag, coal, pulp, wood pulp, tailings, fibers, dust, chemicals, sewage treatment, sedimentation tanks, asphalt, silos and other media outlet.
北京华泰辉阀门有限公司是一家集中销售进口气动刀型闸阀、进口对夹刀型闸阀、进口不锈***型闸阀、进口电动刀型闸阀、进口手动刀型闸阀、进口链轮刀型闸阀。公司本着以人为本、与时俱进的精神，争创阀业行业***者，愿与您互利共赢，共创辉煌！郑重声明：阀门属于机械工业，主要是因为型号、材质、压力、温度不同等价格均有异。您的特殊要求：例如超高压、超高温、超耐腐、超耐磨均需要特殊的定制。