|
Sick GTE6-N1211 Description PinPoint LED for a bright, precise light spot Durable metal threaded inserts SICK ASIC technology - the result of decades of experience in photoelectric sensors Large, user-friendly potentiometer Large, bright indicator LEDs IP 67 enclosure rating Your benefits Easy alignment and precise object detection due to a highly visible PinPoint LED Quick and easy mounting and high durability due to threaded metal inserts SICK ASIC technology provides high performance, excellent reliability and crosstalk immunity Easy to adjust due to large, user-friendly potentiometers Easy to monitor due to large, bright indicator LEDs Easy installation with SICK accessories Features Dimensi*** (W x H x D):: 12 mm x 31.5 mm x 21 mm Sensing range max.: 300 mm 1) Sensing range: 250 mm Housing desig (light emission): Cuboid Light source: PinPoint LED 2) Type of light: visible red light W***e length: 650 nm Sensitivity adjustment: Potentiometer, 5-turn Sensor/detection principle: Photoelectric proximity sensor, energetic Light spot (distance): 7 mm (90 mm) 1) Object with 90 % reflectance (referred to standard white DIN 5033) 2) ***erage service life of 100,000 h at TA = +25 °C Mechanics/electronics Enclosure rating: IP 67 Supply voltage: 12 V DC ... 24 V DC 1) Residual ripple: &plu***n; 10 % 2) Power c***umption: ≤ 30 mA 3) Switching output: NPN, light/dark-switching, selectable via light/dark selector, open collector Output current Imax.: 100 Resp***e time: < 1.25 µs 4) Switching frequency: 500 Hz 5) Connection type: Cable, 3-wire, 2 m 6) Cable material: PVC Conductor cross-section: 0.14 mm2 Circuit protection: A B D 7) 8) 9) Weight: 60 g Housing material: ABS/PC Optics material: PMMA Ambient temperature, operation: -25 °C ... 55 °C Ambient temperature, storage: -40 °C ... 70 °C Polarisation filter: - Signal voltage NPN HIGH / LOW: approx. VS / ca. 3 V AS-Interface-Chip: - 1) Limit values, operation in short-circuit protected network max. 8 A 2) May not exceed or fall short of VS 3) Without load 4) Signal transit time with resistive load 5) With light/dark ratio 1:1 6) Do not bend below 0 °C 7) A = VSconnecti*** reverse-polarity protected 8) B = inputs and output reverse-polarity protected 9) D = outputs overcurrent and short-circuit protected |