小型齿轮减速机尺寸表 Dimension of ***all Gear Reducer
MODEL:SH
卧式减速机Horizontal Type Reducer
尺寸表Dimension (m/m)
型*** Model No. |
***達容量 Motor Capacity |
減速比 Gear Ratio |
A | E | B | J | I | C | H | Y | N | X | L | M | V |
出力軸 Output shaft |
重量 |
||||
D | S | W | T | U | |||||||||||||||||
10 |
0.1KW 1/8HPx4P 0.2KW 1/4HPx4P |
1/3~1/50(1/60~1/100) 1/3~1/30(1/40~1/60) |
46 | 40 | 65 | 110 | 135 | 85 | 129 | 12 | 9 | 17 |
280 290 |
100 110 |
119 133 |
18 | 30 | 5 | 5 | 15 |
5 8 |
11 |
0.1KW 1/8HPx4P 0.2KW 1/4HPx4P 0.4KW 1/2HPx4P |
1/60~1/200 1/40~1/90 (1/100~1/120) 1/3~1/30 (1/40~1/60) |
58 | 65 | 90 | 130 | 155 | 95 | 145 | 13 | 9 | 18 |
305 315 320 |
100 110 115 |
119 133 147 |
22 | 40 | 7 | 7 | 18 |
7 10 12 |
12 |
0.2KW 1/4HPx4P 0.4KW 1/2HPx4P 0.75KW 1HPx4P 1.5KW 2HPx4P |
1/100~1/200 1/40~1/90 (1/100~1/200) 1/3~1/30 (1/40~1/60) (1/3~1/40) |
66 | 90 | 120 | 140 | 180 | 115 | 175 | 15 | 11 | 23 |
330 335 355 390 |
110 115 135 150 |
133 147 161 181 |
28 | 45 | 7 | 7 | 24 |
11 13 16 25 |
13 |
0.4KW 1/2HPx4P 2.2KW 3HPx4P |
1/100~1/200 1/3~1/25 |
78 | 130 | 165 | 170 | 210 | 130 | 202 | 18 | 13 | 26 |
365 455 |
115 150 |
147 181 |
32 | 55 | 10 | 8 | 27 |
16 28 |
14 |
0.75KW 1HPx4P 1.5KW 2HPx4P 2.2KW 3HPx4P |
1/100~1/200 1/60~1/100 (1/125~1/170) 1/30~1/50 (1/60~1/100) |
95 | 150 | 195 | 210 | 255 | 150 | 240 | 20 | 15 | 28 |
425 460 500 |
135 150 150 |
161 181 181 |
40 | 65 | 10 | 8 | 35 |
44 46 46 |
15 |
1.5KW 2HPx4P 2.2KW 3HPx4P |
1/100~1/200 1/60~1/100 |
115.5 | 170 | 230 | 265 | 330 | 185 | 293 | 25 | 19 | 38 |
490 515 |
150 160 |
181 212 |
50 | 80 | 14 | 9 | 44.5 |
50 60 |
註1)表中( )內數字係表示輕荷重使用。
2)表中重量以配合三相***達為主,其它***相、剎車、直流、特殊等***達重量另***。
3)表中"L"內數字以三相為主,剎車及其它特殊***達另***。
4)***達***頻,***雙***壓依設計所須另***。
5)以上數值若有***更,恕不另行通知。
NOTES:
(1) Values shown in parenthesis ( ) are used for light loading.
(2) Weights shown in the above chart are based on 3-phase, weights for single phase, brake, DC, or special motor shall be referred to specific values.
(3) Values shown in "L" column are based on 3-phase, brake for other special motor refer to specific motor refer to specific values.
(4) When the need arises to determine the special voltage frequency for single phase, please contact the Li-Ming application engineering team.
(5) Above specificati*** are subject to change without prior notice.