BRECO ***输送同步带

ATN timing belts from the MULCO EWIV Europe Group of Companies are not only one of the latest innovati*** of drive technology, they are also in the direct service of beauty. Every woman will know how to use an eye liner in order to bring a certain depth and expression to the eyes, but very few know just how fragile and difficult it is to move the core of this metal or cedar wood pencil with bare hands. It is therefore even more astonishing that a packing machine can handle the leads of the eye liner pencil so gently that even soft female hands can't improve on this.

This process, developed into a real marvel of technology by Hans-Joachim Lortz, owner of the LogicPak in Hessian Dieburg, is called "sleeving" within the packing industry. "Sleeves“ are hose-type wrappers made of shrink-down plastic which protect fragile products such as the eye liner leads mentioned above as well as, for instance, plastic bottles with baby food or other fillings which should not be manipulated in any way by the trade. The tightly fitting, shrunk-down "sleeve“ can only be destroyed by force.

As developer and supplier of these sleeve machines, LogicPak is one of the first ports of call whenever difficult products or those requiring protection h***e to be sealed partially or completely in a shrink-down film. The introduction of the innovative ATN timing belts in place of the previous chain drives and conveyors has turned these sleeve machines from Dieburg into an even more desirable product.

Hardly has it been introduced on the market than the ATN timing belt is giving manufacturers of drive chains sleepless nights. Developed by BRECO-Antriebstechnik Breher GmbH & CO, one of the most innovative producers in the field of timing belt technology and a member of the MULCO Europe EWIV Group of Companies, the ATN impressively dem***trates the possibilities further development of the tried and test polyurethane timing belt can offer.

In co-operation with the MULCO-Europe EWIV member Hilger und Kern GmbH, Mannheim, LogicPak looked for and found a way to optimise the transportation, insertion and subsequent shrinking of the protective film in a hot air tunnel of tiny and fragile products, some of which are almost impossible to process by hand, from the co***etics and writing implements industry. Up to 160 of the extremely fragile eye liner leads, measuring just 4 mm in diameter, are picked up per minute by the sleeve machine as gently as if wearing glacé gloves and transported to the sleeving station with flightd ATN 12.7 inch pitch timing belts. Not a single piece is broken, something just not possible at this speed if handled manually.

Two mandrels, one to stop the product and one to carry the sleeve, then envelop the product as if by magic and transport it to the hot air shrink-down station.

A brilliant idea - but it was the fast-growing market which promoted and demanded the rapid development of the design. New fields of application and products to be sleeved are opening up all the time.

"Our technology makes it possible, by means of special retainers, to process products with an asymmetric and insecure surface“, states Hans-Joachim Lortz, showing sleeved ballpoint pen housings, co***etic pencils or pharmaceutical products as ***all as a thumbnail.

However, the chain drive of the machine did not meet the high demands of Hans-Joachim Lortz. Although no high torque and forces require transferring, the machine, controlled via 11 axes, should require even less maintenance and be even easier to operate, and should in particular be easier to set up for a change of format. This optimal solution from Hans-Joachim Lortz is offered by the ATN timing belt. Compared to other soluti*** such as welded flights or chains, for instance, the present application, combined with a two-part sliding flight system, provides exactly the right flexibility required by customers. The customer now has lower costs, because the personnel required for a format change only need to be instructed in the specific tasks, which is a lot cheaper than general training.

Here Hans-Joachim Lortz has a quite simple philosophy: “We h***e developed a module. Every operation should be foolproof in its execution. A change of format means red flights in, blue flights out or the other way round“. No time-c***uming removal of chains and flights, making conversion of the machine for other formats and products a simple task. The operator simply slides the milled-to-size retainers on to the flights designed for the measurements of the product to be sleeved.

The ATN timing belt pushed by the drive starts gently, does not require any greasing and maintenance and has a long service life. There is no question that particularly product sensible branches are happy at not h***ing to grease the chain conveyor, particularly as the lubricant presents a c***iderable danger of contamination for the products to be sleeved.

The LogiPak design of the ATN timing belt is extremely flexible in its application and offers critical advantages such as:

use of various flight materials
variable flight pitch
high flight position accuracy in relation to the timing belt
designers can react a lot faster to changing field conditi*** or products because there is no need to use a new PU timing belt, with the correspondingly great expense for tools and moulds
ATN lowers development costs in relation to time. Tests lead to sophisticated designs much faster.

Based on the proven material composition of the PU timing belts and a good stock of standard dimensioned ATN 10, ATN 12.7 and ATN 20 belts in four widths, the application possibilities and flight shapes are only restricted by the creativity of the designers - but, as we know, this has no limit!

BRECO.BRECOFLEX传动带.BRECOFLEX同步带.BRECO同步带工业皮带***解决方案

BRECOflex有限公司，公司成立于1989年与坚定承诺，我们的产品带入市场，以***，我们的客户服务和人民，我们的聘用，谁致力于满足客户的***高期望。我们的产品提供质量上乘，创新设计，以满足您今天的***具挑战性的要求和未来。我们的产品提供优良的品质和创新的设计功能，以满足您的***具挑战性的要求，在今天和未来。

BRECOflex公司，在聚氨酯同步带行业的***，套，的新的***更高的标准，***的产品designs.BRECO柔性有限公司，在聚氨酯同步带行业的***，******的产品设计新的***更高的标准。多元化同步带产品，金属滑轮和配件的科学设计和制造的精度和undeviating质量。

BRECOflex有限责任公司提供的******的***产品广泛一致。我们的聚氨酯同步带，滑轮，异型带，背衬Esband ®真是无穷无尽的梭织平皮带配件，广泛的产品范围。所有BRECOflex产品指的是在高品质。

BRECO.BRECOFLE***部位于德国生产同步带，运输V带，平面和特殊皮带，带轮和随之而来的组件。多样的应用领域的开发和生产特殊皮带。带背涂层的大量和***多样的造型挡板

1967年成立的BRECO由Rudolf Breher作为工具的制作和塑料加工企业。
1968年开发的生产工艺制造的热塑性聚氨酯同步带（专利）。BRECO成为的Mulco合资的成员。
1975年发展的BRECOFLEX®生产工艺（专利）。
1980年发展自跟踪皮带，同步带和紧张的成员在一个带结构的组合。
1985 BRECO开始生产同步带轮，并进一步组件。
1986年开发和专利保护的新同步带，类型审裁处。建立的BRECO GMBH公司Zahnscheiben的幼稚园。
1988年沃尔特·Rothermundt GMBH＆CO KG从门兴格拉德巴赫成为我们的***个子公司。
1989 BRECOflex有限公司L.L.C.在美国成立。
1992年安东·克洛克Antriebstechnik公司成为本公司的附属公司。
1995年粘结剂磁S.A.R.L.从Gennevilliers的（法国），成为一间附属公司。
1997年开发和专利保护的弧形齿带英美***公司提供显着提高传输和运行性能。
1998年认证根据DIN EN ISO 9001认证，BRECO Antriebstechnik Breher GMBH＆Co。和BRECO GMBH＆CO。Zahnscheiben公斤。
2000年新开发的运输皮带ATN的专利申请。另一个生产车间的建设和就职典礼。
2001年ATN的模块化系统的进一步发展，推出ATN的同步带锁和ATN的V型槽。移至新建BRECO***。
2002年的ATN的CONNECT计算程序的开发。启动了高精度的轮廓与集成光学测量系统的焊接站。引进的两个长丝张力增强的运行性能的成员安排。
2003年推出集成导轨（BATK）的带弯曲的牙齿。推出的基于网络的计算工具和***CAD图纸的可能性产品目录。
2004年引进两个长丝张力成员卷取我们BRECOFLEX®同步带改进运行性能。
2005年推出新一代的BRECOFLEX®StandardPlus同步带，尤其是对高精度***应用。
2006年的BRECO®同步带简介锁定AT10 DC和T10 DC。
2007年一个新的生产车间建设，以扩大我们的能力。引进一个新的同步带，ATS15型输电和线性技术。我们的新BRECOFLEX®，AT3同步带发射功率较小的传输。
2008运动将在未来的地方- 期待我们进一步的创新产品的报价。