|
HabaFLOW Product Data Sheet FNB-8E |
|
Product Designation
 |
|
| Product Group: | TPU food conveyor and processing belts |
| Product Sub-Group: | Food conveyor belts |
| Main Industry Segments: | Chemical industry; Food conveying/processing in general; Food unwrapped/open; Frozen food; Ready meals |
| Belt Applicati***: | Discharging belt; Food processing/conveying belt; General conveying belt; Packaging belt; Transfer belt |
| Special Features: | Abrasion resistant; Chemical resistant; Food suitable |
| Mode of Use/Conveyance: | Accumulation; Horizontal |
Product Design (enlarged)
Product C***truction/Design
|
|
|
|
|
|
Conveying Side (Material): |
Thermoplastic polyurethane (TPU) |
|
|
Conveying Side (Surface): |
***ooth |
|
|
Conveying Side (Property): |
Non-adhesive |
|
|
Conveying Side (Color): |
White |
|
|
Traction Layer (Material): |
Polyester (PET) fabric |
|
|
Number of Fabrics: |
2 |
|
|
Running Side/Pulley Side (Material): |
Polyester (PET) fabric |
|
|
Running Side/Pulley Side (Surface): |
Impregnated fabric |
|
|
Running Side/Pulley Side (Color): |
Light gray |
Product Characteristics
|
|
|
| Slider bed suitable: |
Yes |
| Carrying rollers suitable: |
Yes |
| Troughed installation suitable: |
No |
| Power turns, curved installati***: |
No |
| Nosebar suitable: |
No |
| Low noise applicati***: |
No |
| Antistatically equipped: |
Yes |
| Metal detector suitable: |
No |
| Flammability: |
No specific flammability prevention property |
| Food suitability FDA: |
Yes - acc. to 21CFR parts 170 - 199. Contact your Habasit representative for detailed information. |
| Food suitability USDA: |
No use intended |
| Food suitability EU: |
Yes - acc. to Regulation (EC) No. 1935/2004 and Directive 2002/72/EC as amended. Contact your Habasit representative for detailed information. |
| Other conformance/approval: |
JFRL passed |
All data are approximate values under standard climatic conditi***: 23°C/73°F, 50% relative humidity (DIN 50005/ISO 554), and are based on the Master Joining Method.
Technical Data
|
|
|
|
|
|
| Thickness: |
1.6 |
mm |
0.06 |
in. |
| Mass of belt (belt weight): |
1.8 |
kg/m2 |
0.37 |
lbs./sq.ft |
| Nosebar Radius (minimum): |
-- |
mm |
-- |
in. |
| Pulley diameter (minimum): |
20 |
mm |
0.8 |
in. |
| Pulley diameter minimum with counter flection: |
25 |
mm |
1 |
in. |
| Tensile force for 1% elongation (k1% static) per unit of width (Habasit Standard SOP3-155 / EN ISO21181): |
7.5 |
N/mm |
43 |
lbs./in. |
| Tensile force for 1% elongation after relaxation (k1% relaxed) per unit of width (Habasit Standard SOP3-155 / EN ISO 21181): |
5.0 |
N/mm |
29 |
lbs./in. |
| Admissible tensile force per unit of width: |
12 |
N/mm |
69 |
lbs./in. |
| Operating temperature admissible (continuous): |
Min -15 Max 80 |
°C °C |
Min 5 Max 176 |
°F °F |
| Coefficient of friction of driving pulley of steel: |
0.15 |
[-] |
0.15 |
[-] |
| Coefficient of friction of driving pulley with friction cover: |
0.35 |
[-] |
0.35 |
[-] |
| Coefficient of friction on slider bed of pickled steel sheet: |
0.20 |
[-] |
0.2 |
[-] |
| Coefficient of friction on slider bed of stainless steel sheet: |
0.15 |
[-] |
0.15 |
[-] |
| Seamless manufacturing width: |
4000 |
mm |
157 |
in. |
| On request other seamless manufacturing width: |
NA |
mm |
NA |
in. |
All data are approximate values under standard climatic conditi***: 23°C/73°F, 50% relative humidity (DIN 50005/ISO 554), and are based on the Master Joining Method.
Chemical Resistance
|
|
|
| Chemical Resistance Class: | 6 (for details, see separate overview) |
| Remark: |
These indicati*** are not guarantees of properties. |
| Resistant to: |
All solids; Dirt; Dryness; Humidity; Putrefaction |
| Limited resistance to: |
None |
| Not resistant to: |
Caustic Soda > 10%; Hydrochloric acid > 20%; Sodium hypochlorite/j***elle water; Sulphuric acid > 50% |
Calculati***
|
|
|
For most applicati*** calculation is not required. Should you still need a calculation: please ask Habasit. |
Installation and Handling Instructi***
|
|
|
Do not go below initial elongation (epsilon) ~ 0.3%; Install the slack belt and tension until running perfectly under the full belt load. |
Storage
|
|
|
For details c***ult 'Storage and handling requirements for belts and machine tapes' or contact Habasit.; Protect belts from sunlight/UV-radiation/dust and dirt. Store spare belts in a cool and dry place and if possible in their original packaging. |
Joining System
|
|
|
| Master Joining Method: |
Flexproof 20 x 80 |
| Remarks: |
Master joining method for standard applicati*** |
| Link to Joining Data Sheet |
|
|
|
| Alternative Joining Method: |
Thermofix |
| Remarks: |
Optional joining method |
|
|
|
| Alternative Joining Method: |
Clipper UCM-36 SP |
| Remarks: |
Optional joining method |
Limitati***
|
|
|
Not suitable for wet operati*** combined with increased temperatures; This product has not been tested according to ATEX standa*** (atmospheres with explosion risk - ATEX 95 regulation or EU directive 94/9) and therefore is subject to user’s analysis in the respective environment. |
Legend
All data are approximate values under standard climatic conditi***: 23°C/73°F, 50% relative humidity (DIN 50005/ISO 554), and are based on the Master Joining Method.
瑞士Habasit***是***大的工业皮带制造商，***工业皮带的***者。总公司成立于1946年，为***化学合成传动带及输送带制造商。Habasit的技术研发小组，除了在公司既 有的产品在线持续研究之外,更以不断创新的概念在市场上推陈出新。Habasit的***形象及服务质量，长久以来 受到广大客户的认同，并在业界取得******的地位。 瑞士Habasit集团目前于***共有19个分支机构，与一百多个销售据点，以持续提供客户***高质量的产品、******的技术、与***好的服务。
瑞士Habasit 的生产中心分布于瑞士总部、意大利、美国、及印度．提供的产品有传动皮带、输送皮带、圆带、模块式网带、加工工具、锭带、无接缝皮带、不织布输送带、耐高温带、印花导带、PU齿形带、及各式特殊带。 提供客户***的***服务是Habasit 长久以来坚持的理念，因此，我们发展了一套应用行业发展策略(SBU-strategic business unit)，针对各个行业领域，提供Habasit 的***建议，以期与客户共同成长。
瑞士habasit提供的服务项目：
皮带种类：整卷皮带、接圆皮带、或已预留接头皮带
接头方式：齿接、磨接、快速对接、与钉扣接圆
特殊加工：皮带打孔、导条、挡板、包边、裙边、现场接着服务、及其它特殊加工需求拥有制造宽度可达四米之皮带压延机，更可满足客户的特殊需求。
主要产品和服务：Habasit 哈伯斯特 Habasit皮带.龙带.印花导带.输送带.同步带.圆带.多沟带.牵引带.交叉铺网带.模组网带 .皮带加工设备及皮带现场接驳服务
Habasit旗下品牌：Fixol® Habasit Flexfold® Habilene®
HabaGUARD® Habasit HyGUARD® Hamid®
Habasit® HabasitLINK® Polycord®
Habasit Cleanline® Habidur®
大陆地区
技术选型电话：13391350298
销 售 热 线：13774455550 程先生
电 话： 86-021-60481210
传 真： 86-021-59774515
联系人：程亮（技术部）13774455550
E- mail: habasit@
http://www.habasit-
http://
http://
http://www.habasit-belts.
http://www.habasit.
地址：上海市青浦区新凤中路1742号
|
|
|
| * |
No calculation Value |
| 2) |
Product containing different coating materials such as elastomer‚ natural fibers‚ silicones‚ etc.‚ are not subject to the directive 2002/72/EC |
| 3) |
CLA: Coordination of the centre line-***erage value Ra (in the US also Arithmetical ***erage (AA)) to the maximum peak to valley height Rt for surfaces manufactured by chip removal. |
| 8) |
Due to high coefficient of friction of running/pulley side‚ the suitability for use on slider beds is limited |
| BfR |
German federal institute for risk asses***ent (Bundesinstitut fuer Risikobewertung) |
| EEC |
European Economic Community |
| EU |
European Union (Directive 2002/72/EC) |
| FDA |
Food and Drug Administration |
| NA |
Not ***ailable |
| NAP |
Not applicable |
| USDA |
United States Department of Agriculture (Food Safety and Inspection Service‚ Washington D.C.) |
| JFRL |
Japan Food Research Laboratory |