HabaFLOW Product Data Sheet FNB-8E+H15 Due to differing governmental regulations HabaGUARD belts are only for use in the USA and Canada. |
|
![]() |
![]() |
Product Group: | TPU food conveyor and processing belts |
Product Sub-Group: | HabaGUARD antimicrobial belts |
Main Industry Segments: | Food conveying/processing in general; Food unwrapped/open; Frozen food; Ready meals |
Belt Applications: | Discharging belt; Food processing/conveying belt; General conveying belt; Packaging belt; Transfer belt |
Special Features: | Antimicrobially equipped |
Mode of Use/Conveyance: | Accumulation; Horizontal |
![]() |
![]() |
![]() |
|
Conveying Side (Material): |
Thermoplastic polyurethane (TPU)![]() |
|
Conveying Side (Surface): |
Smooth![]() |
|
Conveying Side (Property): |
Non-adhesive![]() |
|
Conveying Side (Color): |
White![]() |
|
Traction Layer (Material): |
Polyester (PET) fabric![]() |
![]() |
Number of Fabrics: |
2![]() |
|
Running Side/Pulley Side (Material): |
Polyester (PET) fabric![]() |
|
Running Side/Pulley Side (Surface): |
Impregnated fabric![]() |
|
Running Side/Pulley Side (Color): |
Light blue![]() |
![]() |
![]() |
Slider bed suitable: |
Yes ![]() |
Carrying rollers suitable: |
Yes ![]() |
Troughed installation suitable: |
No ![]() |
Power turns, curved installations: |
No ![]() |
Nosebar suitable: |
No ![]() |
Low noise applications: |
No![]() |
Antistatically equipped: |
Yes ![]() |
Metal detector suitable: |
Yes ![]() |
Flammability: |
No specific flammability prevention property ![]() |
Food suitability FDA: |
Yes - acc. to 21CFR parts 170 - 199. Contact your Habasit representative for detailed information. ![]() |
Food suitability USDA: |
USDA AMS meat and poultry; compliance with standard NSF/ANSI/3-A 14159-3. Certification is valid only if belt edges are sealed and cleats/v-guides etc. meet the standard. Contact your Habasit representative for detailed information. ![]() |
Food suitability EU: |
No ![]() |
Other conformance/approval: |
Contains an antimicrobial additive approved by EPA for use with conveyor belts in food contact applications. ![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
Thickness: |
1.6![]() |
mm |
0.06![]() |
in. |
Mass of belt (belt weight): |
1.8![]() |
kg/m2 |
0.37![]() |
lbs./sq.ft |
Nosebar Radius (minimum): |
--![]() |
mm |
--![]() |
in. |
Pulley diameter (minimum): |
20![]() |
mm |
0.8![]() |
in. |
Pulley diameter minimum with counter flection: |
25![]() |
mm |
1![]() |
in. |
Tensile force for 1% elongation (k1% static) per unit of width (Habasit Standard SOP3-155 / EN ISO21181): |
8![]() |
N/mm |
46![]() |
lbs./in. |
Tensile force for 1% elongation after relaxation (k1% relaxed) per unit of width (Habasit Standard SOP3-155 / EN ISO 21181): |
5.5![]() |
N/mm |
31![]() |
lbs./in. |
Admissible tensile force per unit of width: |
12![]() |
N/mm |
69![]() |
lbs./in. |
Operating temperature admissible (continuous): |
Min -15 Max 80 |
°C °C |
Min 5 Max 176 |
°F °F |
Coefficient of friction of driving pulley of steel: |
0.15![]() |
[-] |
0.15![]() |
[-] |
Coefficient of friction of driving pulley with friction cover: |
0.35![]() |
[-] |
0.35![]() |
[-] |
Coefficient of friction on slider bed of pickled steel sheet: |
0.20![]() |
[-] |
0.2![]() |
[-] |
Coefficient of friction on slider bed of stainless steel sheet: |
0.15![]() |
[-] |
0.15![]() |
[-] |
Seamless manufacturing width: |
2400![]() |
mm |
94![]() |
in. |
On request other seamless manufacturing width: |
NA![]() |
mm |
NA![]() |
in. |
![]() |
![]() |
Chemical Resistance Class: | 6 (for details, see separate overview) |
Remark: |
These indications are not guarantees of properties.![]() |
Resistant to: |
All solids; Dirt; Dryness; Humidity; Putrefaction![]() |
Limited resistance to: |
None![]() |
Not resistant to: |
Caustic Soda > 10%; Hydrochloric acid > 20%; Sodium hypochlorite/javelle water; Sulphuric acid > 50%![]() |
![]() |
For most applications calculation is not required. Should you still need a calculation: please ask Habasit.![]() |
![]() |
Do not go below initial elongation (epsilon) ~ 0.3%; Install the slack belt and tension until running perfectly under the full belt load.![]() |
![]() |
For details consult 'Storage and handling requirements for belts and machine tapes' or contact Habasit.; Protect belts from sunlight/UV-radiation/dust and dirt. Store spare belts in a cool and dry place and if possible in their original packaging.![]() |
![]() |
![]() |
Master Joining Method: |
Flexproof 20 x 80 ![]() |
Remarks: |
Master joining method for standard applications![]() |
Link to Joining Data Sheet |
![]() |
![]() |
Alternative Joining Method: |
Flexproof 10 x 80 ![]() |
Remarks: |
Master joining method for nosebar / high stress applications![]() |
Link to Joining Data Sheet |
![]() |
![]() |
Alternative Joining Method: |
Clipper UCM-36 SP ![]() |
Remarks: |
Optional joining method![]() |
![]() |
HabaGUARD belts are restricted for direct food contact applications to use at or below room temperature; HabaGUARD is designed to meet the national regulations of the US and Canada. Compliance with regulations in other countries has to be ensured by the user.; Not suitable for wet operations combined with increased temperatures; This product does not protect users or others against food borne or disease-causing bacteria. Proper cleaning procedures must always be adhered to.; This product has not been tested according to ATEX standards (atmospheres with explosion risk - ATEX 95 regulation or EU directive 94/9) and therefore is subject to user’s analysis in the respective environment.
主要产品和服务:Habasit 哈伯斯特 Habasit皮带.龙带.印花导带.输送带.同步带.圆带.多沟带.牵引带.交叉铺网带.模组网带 .皮带加工设备及皮带现场接驳服务
Habasit旗下品牌:Fixol® Habasit Flexfold® Habilene® ![]() |