|
HabaFLOW Product Data Sheet FNT-2M |
|
Product Designation
 |
|
| Product Group: | TPU food conveyor and processing belts |
| Product Sub-Group: | Food conveyor belts |
| Main Industry Segments: | Bakery (biscuit/cookie); Bakery (bread); Dough production |
| Belt Applications: | Dough belt; Proofer belt |
| Special Features: | Easy release property |
| Mode of Use/Conveyance: | Horizontal; Inclined |
Product Design (enlarged)
Product Construction/Design
|
|
|
|
|
|
Conveying Side (Material): |
Polyamide (PA)/Cotton (CO) fabric |
|
|
Conveying Side (Surface): |
Fabric |
|
|
Conveying Side (Property): |
Non-adhesive |
|
|
Conveying Side (Color): |
Gray |
|
|
Traction Layer (Material): |
Polyamide (PA) |
|
|
Number of Fabrics: |
3 |
|
|
Running Side/Pulley Side (Material): |
Polyamide (PA)/Cotton (CO) fabric |
|
|
Running Side/Pulley Side (Surface): |
Fabric |
|
|
Running Side/Pulley Side (Color): |
Gray |
Product Characteristics
|
|
|
| Slider bed suitable: |
Yes |
| Carrying rollers suitable: |
Yes |
| Troughed installation suitable: |
No |
| Power turns, curved installations: |
No |
| Nosebar suitable: |
Yes |
| Low noise applications: |
No |
| Antistatically equipped: |
No |
| Metal detector suitable: |
Yes |
| Flammability: |
No specific flammability prevention property |
| Food suitability FDA: |
Yes - acc. to 21CFR parts 170 - 199. Contact your Habasit representative for detailed information. |
| Food suitability USDA: |
No use intended |
| Food suitability EU: |
Not subjected to Directive 2002/72/EC as product contains materials not covered by the Directive such as elastomers‚ silicones or natural fibers. |
| Other conformance/approval: |
JFRL passed |
All data are approximate values under standard climatic conditions: 23°C/73°F, 50% relative humidity (DIN 50005/ISO 554), and are based on the Master Joining Method.
Technical Data
|
|
|
|
|
|
| Thickness: |
1.35 |
mm |
0.05 |
in. |
| Mass of belt (belt weight): |
1.1 |
kg/m2 |
0.23 |
lbs./sq.ft |
| Nosebar Radius (minimum): |
NA |
mm |
|
in. |
| Pulley diameter (minimum): |
15 |
mm |
0.6 |
in. |
| Pulley diameter minimum with counter flection: |
20 |
mm |
0.8 |
in. |
| Tensile force for 1% elongation (k1% static) per unit of width (Habasit Standard SOP3-155 / EN ISO21181): |
3.6 |
N/mm |
21 |
lbs./in. |
| Tensile force for 1% elongation after relaxation (k1% relaxed) per unit of width (Habasit Standard SOP3-155 / EN ISO 21181): |
1.6 |
N/mm |
9 |
lbs./in. |
| Admissible tensile force per unit of width: |
5 |
N/mm |
29 |
lbs./in. |
| Operating temperature admissible (continuous): |
Min -20 Max 100 |
°C °C |
Min -4 Max 212 |
°F °F |
| Coefficient of friction of driving pulley of steel: |
0.15 |
[-] |
0.15 |
[-] |
| Coefficient of friction of driving pulley with friction cover: |
0.35 |
[-] |
0.35 |
[-] |
| Coefficient of friction on slider bed of pickled steel sheet: |
0.25 |
[-] |
0.25 |
[-] |
| Coefficient of friction on slider bed of stainless steel sheet: |
0.15 |
[-] |
0.15 |
[-] |
| Seamless manufacturing width: |
2400 |
mm |
94 |
in. |
| On request other seamless manufacturing width: |
NA |
mm |
NA |
in. |
All data are approximate values under standard climatic conditions: 23°C/73°F, 50% relative humidity (DIN 50005/ISO 554), and are based on the Master Joining Method.
Chemical Resistance
|
|
|
| Chemical Resistance Class: | 6 (for details, see separate overview) |
| Remark: |
These indications are not guarantees of properties. |
| Resistant to: |
All solids; Dirt; Dryness; Humidity; Putrefaction |
| Limited resistance to: |
None |
| Not resistant to: |
Caustic Soda > 10%; Hydrochloric acid > 20%; Sodium hypochlorite/javelle water; Sulphuric acid > 50% |
Calculations
|
|
|
For most applications calculation is not required. Should you still need a calculation: please ask Habasit. |
Installation and Handling Instructions
|
|
|
Do not go below initial elongation (epsilon) ~ 0.3%; Install the slack belt and tension until running perfectly under the full belt load. |
Storage
|
|
|
For details consult 'Storage and handling requirements for belts and machine tapes' or contact Habasit.; Protect belts from sunlight/UV-radiation/dust and dirt. Store spare belts in a cool and dry place and if possible in their original packaging. |
Joining System
|
|
|
| Master Joining Method: |
Thermofix |
| Remarks: |
Master joining method for standard applications |
| Link to Joining Data Sheet |
 |
Limitations
|
|
|
This product has not been tested according to ATEX standards (atmospheres with explosion risk - ATEX 95 regulation or EU directive 94/9) and therefore is subject to user’s analysis in the respective environment. |
Legend
All data are approximate values under standard climatic conditions: 23°C/73°F, 50% relative humidity (DIN 50005/ISO 554), and are based on the Master Joining Method.
|
|
|
| * |
No calculation Value |
| 2) |
Product containing different coating materials such as elastomer‚ natural fibers‚ silicones‚ etc.‚ are not subject to the directive 2002/72/EC |
| 3) |
CLA: Coordination of the centre line-average value Ra (in the US also Arithmetical Average (AA)) to the maximum peak to valley height Rt for surfaces manufactured by chip removal. |
| 8) |
Due to high coefficient of friction of running/pulley side‚ the suitability for use on slider beds is limited |
| BfR |
German federal institute for risk assessment (Bundesinstitut fuer Risikobewertung) |
| EEC |
European Economic Community |
| EU |
European Union (Directive 2002/72/EC) |
| FDA |
Food and Drug Administration |
| NA |
Not available |
| NAP |
Not applicable |
| USDA |
United States Department of Agriculture (Food Safety and Inspection Service‚ Washington D.C.) |
| JFRL |
Japan Food Research Laboratory |
Quality System (certified)
|
|
|
Independant certification bodies, worldwide, attest that Habasit AG Switzerland, its affiliated manufacturing companies and the sales organization possess efficient organizational, technical and human resources to maintain, guarantee and provide consistently high quality products and services, to the requirements of the ISO 9001/2000 Quality management systems standard.
Certified Manufacturing Sites : Habasit AG, Switzerland : Registered by SQS, CH 3052 Zollikofen, Switzerland, since 1987. Habasit UK : Registered by SGS Yarsley, Camberley, Surrey, UK, since 1992 Habasit Italiana, Vigliano : Registered by Det Norske Veritas, Agrate Brianza, Italy, since 2002. Plastomeccanica : Registered by Det Norske Veritas, Agrate Brianza, Italy, since 2001. Habasit America Buffalo, New York : Registered by ISOQAR, United Kingdom, since 2006. Habasit America Middletown, Connecticut : Registered by ISOQAR, United Kingdom, since 2006. 主要产品和服务：Habasit 哈伯斯特 Habasit皮带.龙带.印花导带.输送带.同步带.圆带.多沟带.牵引带.交叉铺网带.模组网带 .皮带加工设备及皮带现场接驳服务
Habasit旗下品牌：Fixol® Habasit Flexfold® Habilene® |