|
HabaFLOW Product Data Sheet ENU-20ELBD |
|
Product Designation
 |
|
| Product Group: | Extraline conveyor and processing belts |
| Product Sub-Group: | Printing blankets |
| Main Industry Segments: | Textile printing |
| Belt Applicati***: | Printing blanket |
| Special Features: | High precision; Low noise applicati***; Solvent resistant |
| Mode of Use/Conveyance: | Horizontal |
Product Design (enlarged)
Product C***truction/Design
|
|
|
|
|
|
Conveying Side (Material): |
Thermoplastic polyurethane (TPU) |
|
|
Conveying Side (Surface): |
***ooth |
|
|
Conveying Side (Property): |
Non-adhesive |
|
|
Conveying Side (Color): |
Black |
|
|
Traction Layer (Material): |
Polyester (PET) fabric |
|
|
Number of Fabrics: |
2 |
|
|
Running Side/Pulley Side (Material): |
Polyester (PET) fabric |
|
|
Running Side/Pulley Side (Surface): |
Impregnated fabric |
|
|
Running Side/Pulley Side (Color): |
Gray |
Product Characteristics
|
|
|
| Slider bed suitable: |
Yes |
| Carrying rollers suitable: |
Yes |
| Troughed installation suitable: |
No |
| Power turns, curved installati***: |
No |
| Nosebar suitable: |
No |
| Low noise applicati***: |
Yes |
| Antistatically equipped: |
Yes |
| Metal detector suitable: |
No |
| Flammability: |
No specific flammability prevention property |
| Food suitability FDA: |
No use intended |
| Food suitability USDA: |
No use intended |
| Food suitability EU: |
No |
All data are approximate values under standard climatic conditi***: 23°C/73°F, 50% relative humidity (DIN 50005/ISO 554), and are based on the Master Joining Method.
Technical Data
|
|
|
|
|
|
| Thickness: |
2.6 |
mm |
0.1 |
in. |
| Mass of belt (belt weight): |
3.0 |
kg/m2 |
0.61 |
lbs./sq.ft |
| Nosebar Radius (minimum): |
NA |
mm |
NA |
in. |
| Pulley diameter (minimum): |
100 |
mm |
4 |
in. |
| Pulley diameter minimum with counter flection: |
100 |
mm |
4 |
in. |
| Tensile force for 1% elongation (k1% static) per unit of width (Habasit Standard SOP3-155 / EN ISO21181): |
19 |
N/mm |
108 |
lbs./in. |
| Tensile force for 1% elongation after relaxation (k1% relaxed) per unit of width (Habasit Standard SOP3-155 / EN ISO 21181): |
12 |
N/mm |
69 |
lbs./in. |
| Admissible tensile force per unit of width: |
16 |
N/mm |
91 |
lbs./in. |
| Operating temperature admissible (continuous): |
Min -15 Max 70 |
°C °C |
Min 5 Max 158 |
°F °F |
| Coefficient of friction of driving pulley of steel: |
0.15 |
[-] |
0.15 |
[-] |
| Coefficient of friction of driving pulley with friction cover: |
0.35 |
[-] |
0.35 |
[-] |
| Coefficient of friction on slider bed of pickled steel sheet: |
0.15 |
[-] |
0.15 |
[-] |
| Coefficient of friction on slider bed of stainless steel sheet: |
0.15 |
[-] |
0.15 |
[-] |
| Seamless manufacturing width: |
4000 |
mm |
157 |
in. |
| On request other seamless manufacturing width: |
NA |
mm |
NA |
in. |
All data are approximate values under standard climatic conditi***: 23°C/73°F, 50% relative humidity (DIN 50005/ISO 554), and are based on the Master Joining Method.
Additional Technical and Performance Data
|
|
|
Maximum operating temperature intermittent: 90°C/194°F (intermittent = max. 60 sec.) |
Chemical Resistance
|
|
|
| Chemical Resistance Class: | 6 (for details, see separate overview) |
| Remark: |
These indicati*** are not guarantees of properties. |
| Resistant to: |
All solids; Dirt; Dryness; Humidity; Putrefaction |
| Limited resistance to: |
Acetone; Buthyl acetate; Ethyl acetate; Ethyl alcohol; White spirits with less than 5% aromatics; Xylene |
| Not resistant to: |
Caustic Soda > 10%; Dimethylformamide; Dioxan; Halogenated and most aromatic hydrocarb*** (> 5% aromatic compounds); Hydrochloric acid > 20%; Methyl ethyl ketone and alike; Sodium hypochlorite/j***elle water; Sulphuric acid > 50%; Tetrahydrofurane |
Calculati***
|
|
|
For most applicati*** calculation is not required. Should you still need a calculation: please ask Habasit.; Position of the neutral phase (above the running side) [mm]: 1.0 mm / 0.039 in. |
Installation and Handling Instructi***
|
|
|
Follow the Installing and Maintenance Instructi*** which are supplied with each product delivery.; Install the slack belt and tension until running perfectly under the full belt load.; Maximum initial elongation; epsilon max.: 0.8%!; Recommended initial elongation 0.2 - 0.5%. |
Storage
|
|
|
For details c***ult 'Printing Blanket Handling Instructi***' or contact Habasit.; Store printing blankets in their original packaging protected from sunlight/light in a cool and dry place. Storage of printing blankets shall not exceed 2 years at above condition. |
Joining SystemHabasit 哈伯斯特 Habasit皮带.龙带.印花导带.输送带.同步带.圆带.多沟带.牵引带.交叉铺网带.模组网带 .皮带加工设备及皮带现场接驳服务
Habasit旗下品牌：Fixol® Habasit Flexfold® Habilene®
HabaGUARD® Habasit HyGUARD® Hamid®
Habasit® HabasitLINK® Polycord®
Habasit Cleanline® Habidur®
|
|
|
| Master Joining Method: |
Flexproof 10 x 80 |
| Remarks: |
Master joining method for standard applicati*** |
| Link to Joining Data Sheet |
Limitati***
|
|
|
Use cleaning agent as prescribed by the machine or cleaning agent manufacturer.; This product has not been tested according to ATEX standa*** (atmospheres with explosion risk - ATEX 95 regulation or EU directive 94/9) and therefore is subject to user’s analysis in the respective environment. |
Legend
All data are approximate values under standard climatic conditi***: 23°C/73°F, 50% relative humidity (DIN 50005/ISO 554), and are based on the Master Joining Method.
|
|
|
| * |
No calculation Value |
| 2) |
Product containing different coating materials such as elastomer‚ natural fibers‚ silicones‚ etc.‚ are not subject to the directive 2002/72/EC |
| 3) |
CLA: Coordination of the centre line-***erage value Ra (in the US also Arithmetical ***erage (AA)) to the maximum peak to valley height Rt for surfaces manufactured by chip removal. |
| 8) |
Due to high coefficient of friction of running/pulley side‚ the suitability for use on slider beds is limited |
| BfR |
German federal institute for risk asses***ent (Bundesinstitut fuer Risikobewertung) |
| EEC |
European Economic Community |
| EU |
European Union (Directive 2002/72/EC) |
| FDA |
Food and Drug Administration |
| NA |
Not ***ailable |
| NAP |
Not applicable |
| USDA |
United States Department of Agriculture (Food Safety and Inspection Service‚ Washington D.C.) |