|
HabaDRIVE Product Data Sheet TF-33 |
|
Product Designation
 |
|
| Product Group: | Aramide power tran***ission belts |
| Product Sub-Group: | TF tangential/flat belts |
| Main Industry Segments: | Paper manufacturing and processing; Yarn processing |
| Belt Applicati***: | Driving belt; Live roller drive belt; Tangential belt |
| Special Features: | Dimensionally stable; Energy s***ing; High modulus of elasticity; Low initial tension; Simple and fast joining method |
| Mode of Use/Conveyance: | Power tran***ission; Tangential drive |
Product Design (enlarged)
Product C***truction/Design
|
|
|
|
|
|
Friction cover/Pulley side (Material): |
Acrylonitrile-Butadiene-Rubber (NBR) |
|
|
Friction cover/Pulley side (Surface structure): |
Rough structure |
|
|
Friction cover/Pulley side (Color): |
Black |
|
|
Traction Layer (Material): |
Aramide fabric |
|
|
Reverse cover (Material): |
Acrylonitrile-Butadiene-Rubber (NBR) |
|
|
Reverse cover (Surface structure): |
Rough structure |
|
|
Reverse cover (Color): |
Green |
Product Characteristics
|
|
|
| Drive determination: |
Double-sided power tran***ission |
| Antistatically equipped: |
Yes |
All data are approximate values under standard climatic conditi***: 23°C/73°F, 50% relative humidity (DIN 50005/ISO 554), and are based on the Master Joining Method.
Technical Data
|
|
|
|
|
|
| Thickness: |
3.0 |
mm |
0.12 |
in. |
| Mass of belt (belt weight): |
3.2 |
kg/m2 |
0.66 |
lbs./sq.ft |
| Pulley diameter (minimum): |
100 |
mm |
4 |
in. |
| Pulley diameter minimum with counter flection: |
100 |
mm |
4 |
in. |
| Tensile force for 1% elongation (k1% after running in) per unit of width (Habasit standard SOP3-013): |
33 |
N/mm |
188 |
lbs./in. |
| Nominal peripheral force per unit of width: |
33 |
N/mm |
188 |
lbs./in. |
| Operating temperature admissible (continuous): |
Min -20 Max 65 |
°C °C |
Min -4 Max 149 |
°F °F |
| Seamless manufacturing width: |
1100 |
mm |
43 |
in. |
All data are approximate values under standard climatic conditi***: 23°C/73°F, 50% relative humidity (DIN 50005/ISO 554), and are based on the Master Joining Method.
Chemical Resistance
|
|
|
| Chemical Resistance Class: | 2 (for details, see separate overview) |
| Remark: |
These indicati*** are not guarantees of properties. |
| Resistant to: |
All solids; Dirt; Dryness; Fats; Humidity; Mildew; Oils |
| Limited resistance to: |
None |
| Not resistant to: |
Caustic Soda > 10%; Chlorinated hydrocarb***; Concentrated organic and inorganic acids; Cresols; Hydrochloric acid > 20%; Sulphuric acid > 20% |
Calculati***
|
|
|
With power tran***ission belts a calculation at least of the belt width and initial elongation is highly recommended. For this serves the Habasit SeleCalc calculation program. The easiest way is to h***e belt drives calculated by Habasit representatives. |
Installation and Handling Instructi***
|
|
|
Follow the Installing and Maintenance Instructi*** which are supplied with each product delivery. |
Storage
|
|
|
For details c***ult 'Storage and handling requirements for belts and machine tapes' or contact Habasit.; Protect belts from sunlight/UV-radiation/dust and dirt. Store spare belts in a cool and dry place and if possible in their original packaging. |
Joining System
|
|
|
| Master Joining Method: |
Flexproof 10 x 120 |
| Remarks: |
Master joining method for standard applicati*** |
| Link to Joining Data Sheet |
Limitati***
|
|
|
Do not twist or fold belt; Do not force belt on pulleys; Keep belt edges free of any installation/machine contact; This product has not been tested according to ATEX standa*** (atmospheres with explosion risk - ATEX 95 regulation or EU directive 94/9) and therefore is subject to user’s analysis in the respective environment. |
Legend
All data are approximate values under standard climatic conditi***: 23°C/73°F, 50% relative humidity (DIN 50005/ISO 554), and are based on the Master Joining Method.
|
|
|
| * |
No calculation Value |
| 3) |
CLA: Coordination of the centre line-***erage value Ra (in the US also Arithmetical ***erage (AA)) to the maximum peak to valley height Rt for surfaces manufactured by chip removal. |
| 8) |
Due to high coefficient of friction of running/pulley side‚ the suitability for use on slider beds is limited |
| EEC |
European Economic Community |
| NAP |
Not applicable |
Quality System (certified)
|
|
|
Independant certification bodies, worldwide, attest that Habasit AG Switzerland, its affiliated manufacturing companies and the sales organization possess efficient organizational, technical and human resources to maintain, guarantee and provide c***istently high quality products and services, to the requirements of the ISO 9001/2000 Quality management systems standard.
Certified Manufacturing Sites : Habasit AG, Switzerland : Registered by SQS, CH 3052 Zollikofen, Switzerland, since 1987. Habasit UK : Registered by SGS Yarsley, Camberley, Surrey, UK, since 1992 Habasit Italiana, Vigliano : Registered by Det Norske Veritas, Agrate Brianza, Italy, since 2002. Plastomeccanica : Registered by Det Norske Veritas, Agrate Brianza, Italy, since 2001. Habasit America Buffalo, New York : Registered by ISOQAR, United Kingdom, since 2006. Habasit America Middletown, Connecticut : Registered by ISOQAR, United Kingdom, since 2006. |
Product Liability, Applicati*** C***iderati***
|
|
|
If the proper selection and application of Habasit products are not recommended by an authorized Habasit sales spe***t, the selection and application of Habasit products, including the related area of product safety, are the resp***ibility of the customer. All indicati*** / information are recommendati*** and believed to be reliable, but no representati***, guarantees, or warranties of any kind are made as to their accuracy or suitability for particular applicati***. The data provided herein are based on laboratory work with ***all-scale test equipment, running at standard conditi***, and do not necessarily match product performance in industrial use. New knowledge and experiences can lead to modificati*** and changes within a short time without prior notice. BECAUSE CONDITI*** OF USE ARE OUTSIDE OF HABASIT’S AND ITS AFFILIATED COMPANIES CONTROL, WE CANNOT ASSUME ANY LIABILITY CONCERNING THE SUITABILITY AND PROCESS ABILITY OF THE PRODUCTS MENTIONED HEREIN. THIS ALSO APPLIES TO PROCESS RESULTS / OUTPUT / MANUFACTURING GOODS AS WELL AS TO POSSIBLE DEFECTS, DAMAGES, C***EQUENTIAL DAMAGES, AND FURTHER-REACHING C***EQUENCES. |