|
Habasit F-1Product Data Sheet F-1 |
|
Product Designation
 |
|
| Product Group: | Polyamide machine tapes |
| Product Sub-Group: | - |
| Main Industry Segments: | Paper manufacturing and processing |
| Belt Applicati***: | Machine tape |
| Special Features: | Abrasion resistant; C***tant coefficient of friction; C***tant grip and release property; Forgiving in case of short term shock like overloads |
| Mode of Use/Conveyance: | Declined; Horizontal; Inclined; Twists with short center distance; Vertical |
Product Design (enlarged)
Product C***truction/Design
|
|
|
|
|
|
Conveying Side (Material): |
Acrylonitrile-Butadiene-Rubber (NBR) |
|
|
Conveying Side (Surface): |
Rough structure |
|
|
Conveying Side (Property): |
Adhesive |
|
|
Conveying Side (Color): |
Green |
|
|
Traction Layer (Material): |
Polyamide (PA) |
|
|
Number of Fabrics: |
2 |
|
|
Running Side/Pulley Side (Material): |
Acrylonitrile-Butadiene-Rubber (NBR) |
|
|
Running Side/Pulley Side (Surface): |
Impregnated fabric |
|
|
Running Side/Pulley Side Property: |
Non-adhesive |
|
|
Running Side/Pulley Side (Color): |
Green |
Product Characteristics
|
|
|
| Slider bed suitable: |
Yes |
| Carrying rollers suitable: |
Yes |
| Troughed installation suitable: |
No |
| Antistatically equipped: |
Yes |
All data are approximate values under standard climatic conditi***: 23°C/73°F, 50% relative humidity (DIN 50005/ISO 554), and are based on the Master Joining Method.
Technical Data
|
|
|
|
|
|
| Thickness: |
1.25 |
mm |
0.05 |
in. |
| Mass of belt (belt weight): |
1.25 |
kg/m2 |
0.26 |
lbs./sq.ft |
| Pulley diameter minimum with counter flection: |
40 |
mm |
1.6 |
in. |
| Tensile force for 1% elongation (k1% static) per unit of width (Habasit Standard SOP3-155 / EN ISO21181): |
8.5 |
N/mm |
49 |
lbs./in. |
| Tensile force for 1% elongation after relaxation (k1% relaxed) per unit of width (Habasit Standard SOP3-155 / EN ISO 21181): |
2.6 |
N/mm |
15 |
lbs./in. |
| Operating temperature admissible (continuous): |
Min -20 Max 100 |
°C °C |
Min -4 Max 212 |
°F °F |
| Coefficient of friction of driving pulley of steel: |
0.15 |
[-] |
0.15 |
[-] |
| Seamless manufacturing width: |
1200 |
mm |
47 |
in. |
All data are approximate values under standard climatic conditi***: 23°C/73°F, 50% relative humidity (DIN 50005/ISO 554), and are based on the Master Joining Method.
Chemical Resistance
|
|
|
| Chemical Resistance Class: | 2 (for details, see separate overview) |
| Remark: |
These indicati*** are not guarantees of properties. |
| Resistant to: |
All solids; Dirt; Dryness; Fats; Humidity; Mildew; Oils; Putrefaction |
| Limited resistance to: |
None |
| Not resistant to: |
Caustic Soda > 10%; Chlorinated hydrocarb***; Concentrated organic and inorganic acids; Cresols; Hydrochloric acid > 20%; Sulphuric acid > 20% |
Calculati***
|
|
|
For most applicati*** calculation is not required. Should you still need a calculation: please ask Habasit. |
Installation and Handling Instructi***
|
|
|
Do not go below initial elongation (epsilon) ~0.5%.; Install the slack belt and tension until running perfectly under the full belt load. |
Storage
|
|
|
For details c***ult 'Storage and handling requirements for belts and machine tapes' or contact Habasit.; Protect belts from sunlight/UV-radiation/dust and dirt. Store spare belts in a cool and dry place and if possible in their original packaging. |
Joining System
|
|
|
| Master Joining Method: |
Thermofix |
| Remarks: |
Master joining method for standard applicati*** |
| Link to Joining Data Sheet |
|
|
|
| Alternative Joining Method: |
Mechanical joining |
| Remarks: |
Optional joining method |
Limitati***
|
|
|
Keep belt edges free of any installation/machine contact; This product has not been tested according to ATEX standa*** (atmospheres with explosion risk - ATEX 95 regulation or EU directive 94/9) and therefore is subject to user’s analysis in the respective environment. |
Legend
All data are approximate values under standard climatic conditi***: 23°C/73°F, 50% relative humidity (DIN 50005/ISO 554), and are based on the Master Joining Method.
|
|
|
| * |
No calculation Value |
| 2) |
Product containing different coating materials such as elastomer‚ natural fibers‚ silicones‚ etc.‚ are not subject to the directive 2002/72/EC |
| 3) |
CLA: Coordination of the centre line-***erage value Ra (in the US also Arithmetical ***erage (AA)) to the maximum peak to valley height Rt for surfaces manufactured by chip removal. |
| 8) |
Due to high coefficient of friction of running/pulley side‚ the suitability for use on slider beds is limited |
| BfR |
German federal institute for risk asses***ent (Bundesinstitut fuer Risikobewertung) |
| EEC |
European Economic Community |
| EU |
European Union (Directive 2002/72/EC) |
| FDA |
Food and Drug Administration |
| NA |
Not ***ailable |
| NAP |
Not applicable |
| USDA |
United States Department of Agriculture (Food Safety and Inspection Service‚ Washington D.C.) |
Quality System (certified)
|
|
|
Independant certification bodies, worldwide, attest that Habasit AG Switzerland, its affiliated manufacturing companies and the sales organization possess efficient organizational, technical and human resources to maintain, guarantee and provide c***istently high quality products and services, to the requirements of the ISO 9001/2000 Quality management systems standard.
Certified Manufacturing Sites : Habasit AG, Switzerland : Registered by SQS, CH 3052 Zollikofen, Switzerland, since 1987. Habasit UK : Registered by SGS Yarsley, Camberley, Surrey, UK, since 1992 Habasit Italiana, Vigliano : Registered by Det Norske Veritas, Agrate Brianza, Italy, since 2002. Plastomeccanica : Registered by Det Norske Veritas, Agrate Brianza, Italy, since 2001. Habasit America Buffalo, New York : Registered by ISOQAR, United Kingdom, since 2006. Habasit America Middletown, Connecticut : Registered by ISOQAR, United Kingdom, since 2006. |
Product Liability, Applicati*** C***iderati***
|
|
|
If the proper selection and application of Habasit products are not recommended by an authorized Habasit sales spe***t, the selection and application of Habasit products, including the related area of product safety, are the resp***ibility of the customer. All indicati*** / information are recommendati*** and believed to be reliable, but no representati***, guarantees, or warranties of any kind are made as to their accuracy or suitability for particular applicati***. The data provided herein are based on laboratory work with ***all-scale test equipment, running at standard conditi***, and do not necessarily match product performance in industrial use. New knowledge and experiences can lead to modificati*** and changes within a short time without prior notice. BECAUSE CONDITI*** OF USE ARE OUTSIDE OF HABASIT’S AND ITS AFFILIATED COMPANIES CONTROL, WE CANNOT ASSUME ANY LIABILITY CONCERNING THE SUITABILITY AND PROCESS ABILITY OF THE PRODUCTS MENTIONED HEREIN. THIS ALSO APPLIES TO PROCESS RESULTS / OUTPUT / MANUFACTURING GOODS AS WELL AS TO POSSIBLE DEFECTS, DAMAGES, C***EQUENTIAL DAMAGES, AND FURTHER-REACHING C***EQUENCES. |