| 加工定制：是 | 品牌：图尔克 | 型号：NI2-BMI-AP-003 |
| 反应频率：≤ 0.03 kHz | 额定电压：10.0 … 30.0VDC（V） | 额定电流：≤ 150 mA（A） |
| 检测距离：2（mm） |
 | inductive sensor power clamp monitor Order number: 1650252
|
 | |
| Rated operating distance Sn | 2 mm |
| |
| Mounting condition | non-flush |
| |
| Assured sensing range | ≤ (0,81 x Sn) mm |
| |
| Correction factors | St37 = 1, V2A ~ 0.7, Ms ~ 0.4, Al ~ 0.3 |
| |
| Repeatability | ≤ 2 % |
| |
| Temperature drift | ≤ &plu***n; 10 % |
| |
| Hysteresis | 3.0 % of full scale … 15.0 % of full scale |
| |
| Ambient temperature | -25 °C …+ 70 °C |
| |
| |
| |
| Operating voltage | 10.0 VDC … 30.0 VDC |
| |
| Residual ripple | ≤ 10 % Uss |
| |
| DC rated operational current | ≤ 150 mA |
| |
| No-load current I0 | ≤ 20 mA |
| |
| Residual current | ≤ 0.1 mA |
| |
| Rated insulation voltage | ≤ 0.5 kV |
| |
| Short-circuit protection | yes / cyclic |
| |
| Voltage drop at Ie | ≤ 1.8 V |
| |
| Wire breakage / Reverse polarity protection | yes / complete |
| |
| Output function | 4-wire , NO contact , PNP |
| |
| Switching frequency | ≤ 0.03 kHz |
| |
| |
| |
| Warning | |
| |
| |
| |
| Housing | monitoring kit for clamping technology , BMI |
| |
| Dimensi*** | 18.0 mm x 18.0 mm x 29.0 mm |
| |
| Housing material | Plastic , PP |
| |
| Material active face | Plastic , plastic, PA12-GF20 |
| |
| Electrical connection | Connectors , M12 x 1 |
| |
| Cable quality | Ø 2.0 , grey , Lif9Y-11Y , PUR , 0.095 m , 0.11 m |
| |
| Cable cross section: | 3 x 0.08 mm2 |
| |
| Litz wire | 40 x 0.05 mm2 |
| |
| Vibration resistance | 55 Hz (1 mm) |
| |
| Shock resistance | 30 g (11 ms) |
| |
| Protection class | IP67 |
| |
| |
| |
| Operating voltage display | LED green |
| |
| Display switch state | 2 x LEDs yellow / red |
| |
| Included in scope of supply | Mounting plate BMI-MS2 |
上海杭荣电气有限公司
乐清市杭荣自动化电气有限公司
电话：0577-27872202 27872206 27872208
传真：0577-27872200
地址：浙江省乐清市柳市镇环城东路
http://
http://
http://
http://
工作***: 634540716 617656415