|
基板尺寸Board size |
X=300-510mm Y=300-610mm T=0.8-1.6mm [但是会由于印刷条件（如网框尺寸、印刷空余量等）的不同而有所不同] (It may differ accordingly to the condition of actual board size and board margin) |
|
印刷处理能力Capacity |
约4.5秒/张(印刷及回墨时间各1秒时的测试结果) Approx.4.5 sec./board(Squeegee and Scrape speed to be 1 sec.each) |
|
网框上下驱动方式Frame Up/Down |
交流伺服马达带动精密螺杆AC Servo Motor and Ball Screw |
|
网板尺寸Frame Size |
950×950mm 或1000×1000mm T:30-40mm |
|
网板高度设定Gap |
0-10mm(0:指印刷台面的高度Printing table Surface) |
|
离网量设定Separation |
0-20mm(0:指印刷台面的高度Printing table Surface) |
|
网框微调范围Frame Fine Adjustment |
前端Front:X.Y=&plu***n;5mm 后端Rear:X=&plu***n;2.5mm |
|
网框固定方法Frame Fixation |
主固定脚Main :前端2处2 at Front(由手柄控制的手动压脚Manual Clamp) 后端2处2 at Rear(气缸式压脚Air Cylinder Clamp) 辅助压脚Sub :前后各2处2 each on Front and Rear(由手柄控制的手动压脚Manual Clamp) |
|
印刷驱动Squeegee Drive |
交流马达(带变频器)AC Geared Motor、限位传感器Sensor、同步皮带Timing Belt |
|
印刷行程Squeegee Stroke |
0-610mm |
|
印刷速度Squeegee Speed |
50-660mm/sec |
|
印刷角度Squeegee Angle |
60-80° |
|
***尺寸Squeegee Size |
700mm(L)×45-50mm(W)×9mm(T) |
|
***偏角Squeegee Bias |
0-5°可调Adjustable |
|
印刷台尺寸Printing Table Size |
700×780mm(流动方向Flow direction × 前后方向Squeegee direction) |
|
基板固定方式Work Fixation |
真空吸气Air Vacuuming |
|
搬运台驱动Carrier Drive |
交流伺服马达AC Servo Motor 、同步皮带Timing Belt |
|
搬运台停止精度Re-positioning |
10 µm以内or less |
|
整合台驱动Align. Table Drive |
X.Y.θ3轴简易伺服马达控制3 Axis Performance Servo Motor Control |
|
整合移动范围Align. Range |
X.Y=&plu***n;3mm、θ=&plu***n;0.8° |
|
整合精度Align. Accuracy |
10 µm以内or less |
|
摄像头移动轴Camera Axis |
X.Y 2轴2 axis 2支摄像头cameras、手动对位方式Manual Positioning |
|
摄像头移动范围Camera Range |
X=190mm Y=80mm |
|
摄像头视野范围Camera Field of View |
8(横H)×6(纵V)mm |
|
工作高度Flow L Eevel |
920 &plu***n;10mm |
|
使用电源Power Supply |
AC200V 3相Phase 10.4kVA 配漏电保护电闸NFB with Leakage Detector |
|
使用气源Compressed Air |
0.5Mpa 560NL/min |
|
主机尺寸Machine Size |
3100(W)×1860(D)×1675(H)mm |
|
主机重量Machine Weight |
约2000kg Approx. |
|
可选功能Option |
收墨爪Scooper 菜单记忆Recipe Function(记忆数:100、200、400种) 变压器Transformer |