The BRECO coating of polyurethane timing belts open belt
Select the correct coating depends on
The nature of the transportation projects and the required grip. High
Implement the effect of a good, low friction, friction
Reduce power tran***ission performance, soft
Sensitive items or hard sharp objects
Decisive factor.
Each material involved according to the tasks undertaken
Their specific properties.
In order to meet specific tran***ission applicati***, the teeth
And / or transport can be mechanically
Rework. In this way, flexible, the enti
Can be restored to re-band thickness incision
Select the correct coating depends on
The nature of the transportation projects and the required grip. High
Implement the effect of a good, low friction, friction
Reduce power tran***ission performance, soft
Sensitive items or hard sharp objects
Decisive factor.
Each material involved according to the tasks undertaken
Their specific properties.
In order to meet specific tran***ission applicati***, the teeth
And / or transport can be mechanically
Rework. In this way, flexible, the enti
Can be restored to re-band thickness incisionBRECO涂层聚氨酯同步带开口同步带
选择正确的涂层取决于
交通项目的性质和所需的抓地力。高
一个很好的贯彻效果,低摩擦,摩擦
降低电力传输性能,软
敏感物项或硬锋利的物品是
决定性因素。
其特定的属性。
方和/或运输方面可以机械
返工。在这种方式下,灵活的enti
可以***重新带厚切口
选择正确的涂层取决于
交通项目的性质和所需的抓地力。高
一个很好的贯彻效果,低摩擦,摩擦
降低电力传输性能,软
敏感物项或硬锋利的物品是
决定性因素。
其特定的属性。
方和/或运输方面可以机械
返工。在这种方式下,灵活的enti
可以***重新带厚切口
The the BRECO BRECOFLEXPU timing belt application instance design characteristics:
On both sides of the drive roller with the install pulley.
Pulley teeth in order to reduce 1: Z = 33/32/31, etc..
The double-sided endless belt belt arrangement is similar to the movie route.
Tran***ission of data:
BRECOFLEX timing belt 2050 t / 7500 DL
Speed ??N1 = 400 minutes 1
Tran***ission power P = 12 kilowatts
In the film stretch film and belt, which is characterized by a targeted change. Increase due to the molecular chain of the stretching process and adjust the traction direction and tensile strength. Use heated rollers to stretch the process. We recommend that each roller speed changes should be 3 to 3.5%.
In the film stretch film and belt, which is characterized by a targeted change. Increase due to the molecular chain of the stretching process and adjust the traction direction and tensile strength. Use heated rollers to stretch the process. We recommend that each roller speed changes should be 3 to 3.5%.
BRECO BRECOFLEX PU同步带应用实例设计特点:
驱动器两侧的滚筒配备过安装滑轮。
滑轮牙齿排列后减少1:Z =33/32/31等。
双面无尽的皮带皮带安排是类似电影的路由。
BRECOFLEX PU同步带时序皮带2050吨/7500 DL
转速N1=400分钟1
传输功率P=12千瓦
在薄膜拉伸薄膜和皮带,其特点有针对性的变化。由于拉伸过程的分子链在调整牵引方向和拉伸强度增加。使用加热辊进行拉伸过程。我们建议在每个辊速度的变化应达到3%至3.5%。
在薄膜拉伸薄膜和皮带,其特点有针对性的变化。由于拉伸过程的分子链在调整牵引方向和拉伸强度增加。使用加热辊进行拉伸过程。我们建议在每个辊速度的变化应达到3%至3.5%。