BRECO timing belts polyurethane timing belt opening timing belt damage to a variety of reas***
BRECO timing belts polyurethane timing belt openings formulati*** and materials of the timing belt:
Rubber timing belt is the use of high-quality synthetic neoprene imported from Japan as the main raw materials, with excipients into a variety of different uses; skeleton material is imported from Japan, high-quality glass fiber cord; toothed surface is the protection of nylon 66 high elastic cloth . With dynamic flexion around the anti-cracking performance, excellent ozone resistance, aging resistance, heat resistance, oil resistance, wear characteristics.
BRECO timing belts polyurethane timing belt opening the characteristics of synchronous belts
The belt drive is the use of toothed with teeth meshing the power to pass a new tran***ission. Accurate synchronous tran***ission function, require no lubrication, no slip, no pollution, less noise, the tran***ission efficiency of 0.98, the ratio range of up to 1:10, allowing the wire speed up to 50m / s, and tran***ission rate of several hundred watts to hundreds of kilowatts, suitable for multi-axis drive.
Neoprene timing belts are widely used in the textile, automobile, chemical fiber, cigarettes, paper, printing, chemical machinery and equipment; In recent years, mining, metallurgy, iron and steel, machinery, medical equipment demand is increasing.
Double Sided Timing Belt pitch and tooth with single-sided tooth timing belt. Toothed arrangement can be divided into: DA type (with teeth were arranged symmetrically as shown in Figure a; DB type (toothed showed Arrangement overlapping, see Figure b)
3 Note: When you purchase
The surface is clean, the belt is not distorted, with teeth full.
4 Note: when used
1) prohibited the twists and turns, so as not to damage the skeleton material, affecting the belt strength.
2) Do not scratch the belt, so that the belt early damage.
3) ***oid chemicals (in particular, is a strong oxidizing acid, such as) contact.
4) try to ***oid long-term exposure to oil, water.
5) replace the timing belt, you must make the belt tension to a minimum in order to remove the prohibited timing belt in the case of high tension, the use of non-professional tools are hard to pry off
BRECO同步带聚氨脂同步带开口同步带损坏的各种原因
橡胶同步带是采用日本进口优质合成氯丁胶为主要原料，在配入多种不同用途的辅料；骨架材料为日本进口优质玻璃纤维线绳；同时带齿表面是采用尼龙66高弹力布做保护。具有动态屈绕性好，抗龟裂性能好，臭氧性能优良，耐老化，耐热，耐油，耐磨损等特点。
同步带传动是利用带齿与带轮齿啮合来传递动力的一种新型传动方式。具有准确的同步传动功能，不需要润滑，无滑差，无污染，噪音少，传动效率达0.98，速比范围可达1:10，允许线速可达50m/s，传动率从几百瓦到数百千瓦，适宜多轴传动。
氯丁胶同步带广泛应用于纺织、汽车、化纤、卷烟、造纸、印刷、化工的机械设备；近年来，***冶金、钢铁机械、***设备需求量日益增加。
双面齿同步带的节距和齿形与单面齿同步带相同。如按带齿的排布又可分为：DA型（带齿呈对称排列，见图a；DB型（带齿呈交错位置排列，见图b）
3、选购时注意事项：
表面整洁、皮带没有扭曲变形、带齿饱满。
4、使用时注意事项：
1）严禁曲折，以免损伤骨架材料，影响皮带强度。
2）严禁划伤皮带，以免皮带早期损坏。
3）避免与***（尤其是强氧化性酸，如 ）接触。
4）尽量避免与油类、水长期接触。
5）更换同步带时，必须使皮带的张力降到***低，才能取出，严禁同步带在有高张力的情况下，利用非***的工具硬性撬下来