电动叉车电瓶的容量和寿命均受充电电压，温度等参数影响，因此在充电时候必须采取正确的充电方法，正常JUNGHEINRICH永恒力叉车蓄电池充电电压：48V蓄电池54-56V，24V电池26-28V，其环境温度在20-25度情况下，随环境温度发生变化时，叉车电瓶的充电电压应该作出相应的调整，方法为温度每升高1度，充电电压下降0.003V；叉车蓄电池在环境温度降低1度，充电电压应该升高0.003V，建议给永恒力叉车电瓶充电时***好装载自动温度补偿功能设置，以避免季节性温度变化，蓄电池放电放完后，应该尽快补充电源，长时间不充电，会导致电池在充困难，极板霉烂。如需了解关于更多叉车电瓶维护、检测等知识，欢迎来电向我司咨询。
Electric forklift battery capacity and life are affected by the charging voltage, temperature and other parameters influence, therefore in the charging time must adopt the correct charging method, normal JUNGHEINRICH JUNGHEINRICH forklift battery charging battery voltage: 48V 54-56V, 24V 26-28V battery, the ambient temperature in the 20-25 degrees circumstances, with the environmental temperature changes, forklift battery voltage should make the corresponding adjustment, method for the temperature of each increase of 1 degrees, the charging voltage drop 0.003V; forklift battery at ambient temperature 1 degrees lower, charge voltage should increase 0.003V, suggested to the JUNGHEINRICH forklift battery charging when the best loading automatic temperature compensation function set, in order to ***oid the seasonal variation in temperature, battery discharge discharge finished, should as soon as the supplementary power source, long time without charging, causes the battery in the charging plate difficulties, mildew and rot. If need to know more about battery forklift maintenance, testing and other knowledge to the Division I, welcome calls advisory.