| 规格Specification | 单位 UNIT | V4-R-250T-2C | ||||||
| 合模装置 | CLAMPING UNIT | 合模力 | Clamping Force | KN(tf) | ⅰA.B | ⅱA.B | ||
| 合模行程 | Clamping Stroke | mm | 2450（250）（125*2） | |||||
| ***小模厚 | Min.Mold Thickness | mm | 400 | |||||
| ***大***距 | Max.Opening | mm | 300/400 | |||||
| 模柱开距 | Distance Between Tie Bars | mm | 700/800 | |||||
| ***大模具尺寸(L*W) | Max Mould Size | mm | 500*500 | |||||
| 頂出力 | Ejector Force | KN(tf) | 45(4.6) | |||||
| 成品頂出距离 | Ejector Distance | mm | 100 | |||||
|
系統壓力 | System Pressure | Mpa(kgf/cm2) | 13.7(140) | ||||
| 油箱容量 | Oil Tank Capacity | L | 880 | |||||
| 油泵电机 | Electric Power | KW(HP) | 22(30) | |||||
| 机械尺寸 | Machine Dimensi*** (L*W*H) | m | 3.6*2.5*3.7 | |||||
| 机械重量 | Machine Welght | T | 17.4 | |||||
| 规格 Specification | 单位 UNIT | D | ||||||
| ***裝置 | 螺杆直徑 | Screw Diameter | mm | Φ40 Φ42 Φ45 | ||||
| 理論***量 | Theoretical Injection Volume | ㎝3 | 201 222 254 | |||||
| 注塑質量(PS) | Injection Weight(PS) | g(oz) | 183(6.5) 202(7.12) 278(9.7) | |||||
| ***大***壓力 | jection Pressure | Mpa(kgf/cm2) | 180(1838) 163(1666) 142(1452) | |||||
| 射出速率 | Injection Rate | cm3/sec | 143 158 181 | |||||
| 射出速度 | Injection Speed | mm/s | 114 | |||||
| 螺杆轉速 | Screw Speed Rotation | r.p.m | 10-300 | |||||
| 射嘴突出模板尺寸 | Nozzle Out From Platens | mm | ≥45 | |||||
| 电热功率 | Electric Power | KW(HP) | 10.6 | |||||
| 圆盘直径 | Disk Diameter | mm | 1360 | |||||