TDA-110P自动过滤检测仪

TDA-110P全自动过滤器测试仪采用***高/新技术来测试***高达400立方英尺每分钟中等流量的空气过滤器。它是高速成长的ATI模块化过滤器测试系统包括低流量TDA-100P系列和高流量

  TDA-110P全自动过滤器测试仪

1,   TDA-110P全自动过滤器测试仪产品特点:

1.1  全自动的
1.2  故障报警指示
1.3  多项参数同时测试

2,   TDA-110P全自动过滤器测试仪产品应用:

2.1   HEPA过滤器
2.2   ULPA过滤器
2.3   通风过滤器
2.4   压缩空气过滤器

3,     TDA-110P全自动过滤器测试仪产品简介

        TDA-110P全自动过滤器测试仪采用***高/新技术来测试***高达400立方英尺每分钟中等流量的空气过滤器。它是高速成长的ATI模块化过滤器测试系统包括低流量TDA-100P系列和高流量
        TDA-120P系列***器的一部分。TDA-110P全自动过滤器测试仪是理想的测试汽车和飞机客舱空气过滤系统过滤器，真空过滤器，工业和商业通风过滤器，压缩空气过滤器，集体防护过滤器和许多其它种类的中等流量的空气过滤器效率测试仪。
        TDA-110P全自动过滤器测试仪自动的测量悬浮粒子的穿透率，过滤器阻力和过滤器测试时流量。过滤器夹具可以根据客户的要求定做，一旦过滤器放上测试夹具，它的测试程序是迅速的并且完全的自动化的。高达24英寸X24英寸面积能被用来测试，并且定制适配板能被提供整个范围的过滤器配置。用一个高稳定的和高重复性的基于油的悬浮粒子和一个光度侦测系统，

        TDA-110P全自动过滤器测试仪提供高可靠过滤器效率读数高达99.9995%（过滤器的穿透率在0.0005%）。这么大的空间允许精准的流速中等流速HEPA（***过滤器）甚至ULPA（超***过滤器）。
        操作员控制整个系统通过4个用户友好的功能键。用户编程的过滤器测试参数和报警点通过内置的微处理器选择用功能键和测试参数管理。测试结果能被输出通过RS-232串口到用户供应的电脑,或通过用户界面去辅助控制/监控设备.

4,     技术参数:

空气悬浮粒子产生:  

技术;               DOP或PAO油气动雾化
直径:                0.18微米的CMP(符合42 CFR Part 84)
几何标准偏差:  小于1.6(符合42 CFR Part 84)
浓度;                50微克每立方米

悬浮粒子的检测:

技术:               近距离的前向光散射\
***度;            +/- 5%
取样流速:         完全的通过检测器, 10到100标准升每分钟

过滤器测试流速计量:

技术:                NIST 可追溯的质量流量计
重复性;             +/- 5%满量程
范围:                40到400标准升每分钟在温度21.1℃
                        压力760 mm Hg条件下

压力测量:

技术:                电子压力传感器
准确度;             +/- 5%满量程
范围:                0-100毫米贡柱

效率测量:    

通过的流速:      40-400立方英尺每分钟
操作范围:         效率***高到99.9995%

操作需求及物理特性:  
电源:               208VAC, 3相, 60Hz, 15A
压缩空气:        10标准立方英尺每分钟在80PSI
尺寸:               16英尺×(宽)×5英尺(深)×9英尺(高)

英文详细介绍

Description

The TDA-110P Automatic Filter Tester is a state-of-the-art system for testing medium-flow air filters up to 400 cubic feet per minute (CFM). It is part of the growing ATI family of Modular Automatic Filter Testers which includes the low-flow TDA-100P series and the high-flow TDA-120P series testers. The TDA-110P is ideal for testing automotive and airline cabin-air filters, vacuum filters, industrial or commercial ventilation filters, compressed air filters, collective protection military filters, and many other types of medium-flow air filters.

Features

The TDA-110P automatically measures the aerosol penetration, filter resistance, and the test flow of the filter. The filter holder assembly is customized to meet your specific needs, and once the filter is placed into the test fixture, the testing sequence is quick and fully automatic. Filters up to 24 inches by 24 inches square can be tested on the TDA-110P, and customized adapter plates can be provided for the full range of filter configurati*** that you will be testing. Using a highly stable and repeatable oil-based aerosol challenge and a photometric detection system, the TDA-110P provides reliable filter efficiency readings up to 99.9995 percent. (Filter penetrati*** down to 0.0005 percent) This extraordinary span allows for accurate tests of medium-flow filters HEPA and even ULPA media.

The Operator controls the entire testing process through 4-user-friendly function keys. User-programmed filter testing parameters and alarm points are selected using the function keys and test data is managed through the built-in microprocessor. Test results can be output through a RS-232 serial port to a user-supplied computer, or through a user interface port to ancillary control/monitoring equipment.

Although the TDA-110P has extensive built-in functionality, every unit is built to order and a wide variety of optional features can be included.  ATI will thoroughly review your filter requirements before configuring and recommending a system to meet your specific needs.

Specificati***

AEROSOL GENERATION
Technique: Pneumatic nebulization using DOP or PAO
Diameter: 0.18 µ CMD
Geometric Standard Deviation: <1.6
Concentration: 60 milligrams per cubic meter (mg/m³)

AEROSOL DETECTION
Technique: Near forward light scattering
Accuracy: &plu***n; 1%
Sample Flow Rate: 1 cubic foot per minute from the sample stream

FILTER TEST FLOW MEASUREMENT
Technique: Mass Flow meter
Range(*): 40 to 400 cubic feet per minute @ 21.1º C, 760 mm Hg

PRESSURE MEASUREMENT
Technique: Electronic pressure transducer
Accuracy: &plu***n; 0.5% of full scale
Range(*): 0 to 100 millimeters water column
(0 to 3.94 inches water column)

EFFICIENCY MEASUREMENT
Flow Rate Through Filter: 40 to 400 cubic feet per minute
Operating Range: Efficiencies to 99.9995%

OPERATIONAL REQUIREMENTS AND PHYSICAL CHARACTERISTICS
Power: 208 VAC, 3 phase, 60 Hertz, 15 Amps
Compressed Air: 10 scfm @ 80 psig
Size: 22 feet wide by 5 feet deep by 9 feet high

*Note: Can be configured to customer requirements.

Benefits:

• Ease of Use
• Wide Flow Range
• Multiple Filter Configurati***
• Every System Customized
• Fast Cycle Times
• Ergonomic Design
• Reliable and Repeatable
• User Programmable Parameters
• RS-232 Serial Data Output
• Optional User Interface Port