润滑能降低轴承噪音吗？
Can lubrication reduce bearing noise?
轴承噪声可以通过润滑来降低，这是一种常见的方法，也是一种不损坏轴承的方法。在制造噪音时，我们应该了解原因并尽快找到解决办法。以下是通过润滑轴承来降低噪音的方法。
Bearing noise can be reduced by lubrication, which is a common method, but also a method of not damaging bearings. When making noise, we should understand the reas*** and find soluti*** as soon as possible. The following is a way to reduce noise by lubricating bearings.
影响淮安SKF轴承寿命的因素很多。进一步解释和应用了内摩擦声。
There are many factors affecting the life of Huaian SKF bearings. The internal friction sound is further explained and applied.
1。选择合适的粘度和良好的粘度温度
1. Choosing appropriate viscosity and good viscosity temperature
为了防止机床主轴过热，造成机床热变形，影响加工精度或轴承润滑bu良，应根据主轴轴承的结构、速度和间隙选择合适的温度润滑剂。当主轴的工作温度和环境温度变化较大时，为了防止润滑性能受到过大的粘性变化的影响，应采用粘性温度特性。
n order to prevent overheating of machine tool spindle, causing thermal deformation of machine tool, affecting machining accuracy or good lubrication of bearings, appropriate temperature lubricants should be selected according to the structure, speed and clearance of spindle bearings.
2。选择良好的润滑性
2. Choose good lubricity
为了保持主轴与淮安SKF轴承接触面之间的油膜均匀，当主轴开始或停止运动时，冲击载荷发生时，不会损坏油膜。保持良好的润滑性能可以减少摩擦和摩擦热，降低主轴温升。确保加工精度和良好的润滑性能。
In order to keep the oil film between the spindle and the contact surface of Huaian SKF bearing uniform, when the spindle starts or stops moving, the oil film will not be damaged when the impact load occurs. Keeping good lubrication performance can reduce friction and friction heat and reduce spindle temperature rise. Ensure machining accuracy and good lubrication performance.
3。抗.氧化性好
3. Good oxidation resistance
机床主轴采用循环润滑时，主轴轴承油应长期使用，不得变质，要求具有良好的抗.氧化性。
When the spindle of machine tool is lubricated by cyclic lubrication, the bearing oil of the spindle should be used for a long time without deterioration, requiring good resistance to oxidation.
4。防锈性好
4. Good rust resistance
在主轴润滑系统的工作过程中，油不可避免地会与空气冷凝液或机床冷凝液混合，这就需要良好的防锈性。
In the working process of spindle lubrication system, oil will inevitably mix with air condensate or machine tool condensate, which requires good rust resistance.
5。机床淮安SKF轴承是精mi机床及类似设备的主要部件。保证精mi机床的精度和性能是非常重要的。
5. SKF bearing of machine tool Huaian is the main component of precision Mi machine tool and similar equipment. It is very important to ensure the accuracy and performance of precision Mi machine tools.
在安装条件下，导致轴承工作温度异常的主要因素之一是安装包各部件之间的轴承不正确。振动、噪声和逐步gai善导致了原材料质量的提高。在轴承失效分析中，原材料质量因素比例明显降低，但仍是轴承失效的主要因素之一。
Under installation conditi***, one of the main factors leading to abnormal working temperature of bearings is that the bearings between the parts of the installation package are incorrect. Vibration, noise and gradual improvement of Gai lead to the improvement of raw material quality. In the bearing failure analysis, the proportion of raw material quality factors is ***iously reduced, but it is still one of the main factors of bearing failure.
选择是否合适仍然是轴承失效分析中bi须考虑的问题。通过锻造、热处理、旋转和润滑、监测和检查异常的直接原因，使淮安SKF轴承的制造调整到正常状态。安装条件是影响轴承使用的主要因素之一。轴承重力的主要因素往往导致部件之间状态的不正确变化。
Whether the selection is appropriate or not is still a problem for Bi in bearing failure analysis. Through forging, heat treatment, rotation and lubrication, monitoring and inspecting the direct causes of abnormalities, the manufacture of Huaian SKF bearings is adjusted to normal state. Installation conditi*** are one of the main factors affecting the use of bearings. The main factors of bearing gr***ity often lead to incorrect changes of state between components.
文章来自：淮安SKF轴承 www.wh-
文章来自：淮安INA轴承 a-
文章来自：淮安NSK轴承
***：524085168
电话：0510-81207777
手机：13311666672/13395185757