如何拆卸和安装不正确的进口轴承？
How to remove and install incorrect imported bearings?
如果进口淮安NSK轴承安装不正确，我不知道要注意什么才能顺利拆卸。您是否特别注意拆卸进口轴承？进口轴承的拆卸和安装同样重要，因为在拆卸过程中轴承很容易损坏。以下是进口轴承的拆卸方法。
If the installation of imported Huaian NSK bearings is incorrect, I do not know what to pay attention to in order to successfully disassemble. Do you pay special attention to removing imported bearings? The disassembly and installation of imported bearings are equally important because bearings are easily damaged during disassembly. The following is the disassembly method of imported bearings.
进口外环轴承的拆卸方法
Disassembly Method of Imported Outer Ring Bearing
拆下过盈配合外环，在外壳圆周上预挤出外环螺钉的几个螺钉，在一侧均匀拧紧，同时拆下。这些孔通常由单独的淮安NSK轴承覆盖，如塞子和进口轴承。壳体的肩部设有若干凹槽。使用垫圈，按压或轻敲以拆卸螺孔。
Remove the interference fit outer ring, pre-extrude several screws of the outer ring screw on the circumference of the outer shell, tighten them evenly on one side, and remove them at the same time. These holes are usually covered by separate Huaian NSK bearings, such as plugs and imported bearings. The shoulder of the shell is provided with a number of grooves. Use gaskets, press or tap to remove the screw holes.
带圆柱孔进口轴承的拆卸方法
Disassembly Method of Inlet Bearing with Cylindrical Hole
内环的拆卸可以很容易地由压力机拉出。此时，应注意让内环承受其张力。
The removal of the inner ring can be easily pulled out by the press. At this time, attention should be paid to let the inner ring bear its tension.
大轴承内环采用液压方法拆卸。在轴上设置的油孔上施加油压，便于抽出。淮安NSK轴承宽度由液压方法、拉伸、夹紧和拆卸操作。
The inner ring of large bearing is disassembled by hydraulic method. The oil pressure is applied on the oil hole arranged on the shaft for easy extraction. Huaian NSK bearing width is operated by hydraulic method, stretching, clamping and disassembly.
感应加热可以用来去除NU和NJ圆柱滚子轴承的内环。零件加热后拉拔内环的方法可以使内环在短时间内膨胀。
Induction heating can be used to remove the inner rings of NU and NJ cylindrical roller bearings. The method of drawing inner rings after parts are heated can make the inner rings expand in a short time.
进口圆锥孔轴承的拆卸方法
Disassembly Method of Imported Tapered Hole Bearing
拆下带紧固套的小轴承，用固定在轴上的齿轮组支撑内环，将螺母转回几次，然后用锤子敲掉螺母。
Remove the ***all bearing with fastening sleeve, support the inner ring with the gear set fixed on the shaft, turn the nut back several times, and knock the nut off with a hammer.
带油压的大淮安NSK轴承更容易拆卸。油在锥孔轴的油孔中加压，使内环膨胀，轴承解体。在运行中，轴承可能突然出现。***好使用螺母作为齿轮组。
The Dahuai'an NSK bearing with oil pressure is easier to disassemble. The oil is pressurized in the oil hole of the taper hole shaft, which expands the inner ring and disintegrates the bearing. In operation, bearings may suddenly appear. *** is good at using nuts as gear sets.
文章来自：淮安SKF轴承 www.wh-
Article from: Huaian SKF Bearing www.wh-
文章来自：淮安INA轴承 a-
Article from: Huaian INA Bearing a-
文章来自：淮安NSK轴承
Article from: Huaian NSK Bearing
***：524085168
电话：0510-81207777
手机：13311666672/13395185757