MEGADYNEMEGADYNE开口同步带由热塑聚氨酯材料制成，具有较高抗磨损能力。各种类型钢丝芯保证其在高负载传动中仍然保持良好的运转能力。
生产公差小。MEGADYNE传动可靠且具有尺寸稳定性。生产过程中在齿面和/或齿背加一层尼龙布以保证在特殊应用中的运行特性不变。还可在皮带背面加厚一层聚氨酯以防止腐蚀或高负载。
规格型号： T5-T10-T20 AT3-AT5-AT10-AT20 MTD3M-MTD5M-MTD8M-MTD14M STD 5M-STD 8M RPP5-RPP8-RPP14 P1-P2-P4
TG5-TG10-TG20-ATG10-ATG20-HG XL-L-H-XH
TG5-TG10-TG20-ATG10-ATG20-HG XL-L-H-XH
化学性能
防老化、防水解、防紫外线UVA、防臭氧
工作温度：-30℃～+80℃短时间可承受***高+110℃
高度防油、防油酯
抗大多数酸、碱腐蚀
可以与其他热塑材料结合
防老化、防水解、防紫外线UVA、防臭氧
工作温度：-30℃～+80℃短时间可承受***高+110℃
高度防油、防油酯
抗大多数酸、碱腐蚀
可以与其他热塑材料结合
MEGALINEAR皮带可生产成卷装开口带及接口带两种。
开口带
开口带成品为连续长度，中间有与两边平行的钢丝芯。标准卷长为50或100米，其他长度请与我公司销售人员联系.
开口带成品为连续长度，中间有与两边平行的钢丝芯。标准卷长为50或100米，其他长度请与我公司销售人员联系.
MEGALINEAR开口带通常用于直线移动传动装置
接口环带
接口带是根据热塑特性由开口带加工而成的环型皮带，可以接驳成任何长度的环型带。其多V型的接口设计使皮带的接口区可承受较强拉力。
接口带是根据热塑特性由开口带加工而成的环型皮带，可以接驳成任何长度的环型带。其多V型的接口设计使皮带的接口区可承受较强拉力。
接口带适用于输送用途，尤其当动力额定的情况下，可生产不同用途、齿型的皮带，并可附加不同的挡板和覆盖物。
MEGALINEAR皮带有各种不同的带芯可选择，如kevlar芯、高柔韧性芯（HF）高性能（HP）及高性能高韧性（HPF)
MEGADYNE 同步带 皮带***解决方案
MEGADYNEMEGADYNE opening by the thermoplastic polyurethane timing belt is made of high wear resistance. Various types of steel core to ensure its tran***ission in high-load operation is still good capacity.
Production tolerances. MEGADYNE drive, reliable and dimensional stability. Production process in the tooth surface and / or add a layer of nylon cloth back teeth to ensure that applicati*** running in the special characteristics of the same. Also thick layer of polyurethane on the back of the belt to prevent corrosion or high load.
Specificati*** Model: T5-T10-T20 AT3-AT5-AT10-AT20 MTD3M-MTD5M-MTD8M-MTD14M STD 5M-STD 8M RPP5-RPP8-RPP14 P1-P2-P4
TG5-TG10-TG20-ATG10-ATG20-HG XL-L-H-XH
MEGADYNE has the following properties:
Mechanical properties
- Dimensional stability
- Low pre-tension
- Low noise
- Highly resistant to wear
- No maintenance
- Good elasticity
- Highly accurate linear
- Linear speeds up to 80 m / s
Chemical properties
Anti-aging, water solution, UV UVA, anti-ozone
Operating temperature: -30 ℃ ~ +80 ℃ can withstand up to +110 ℃ short time
High degree of anti-oil, ester oil
Resistant to most acids and alkaline
Can be combined with other thermoplastic materials
MEGALINEAR open belt loading zone can produce rolls and interface with two.
Opening with
Opening with a finished product as a continuous length, parallel to the middle and on both sides of the core wire. Standard roll length of 50 or 100 meters, other lengths please contact our sales staff.
MEGALINEAR opening line with commonly used mobile gear
Interface ring
Interface is based on thermoplastic properties with the open ring with a belt made of processing, can be connected into the ring with any length. Its multi-interface design V-belt interface area can withstand a strong pull.
Interface with applicable transportation purposes, in particular the case when the nominal power, can produce different uses, tooth belt, and attach a different plate and cover.
MEGALINEAR belt with a variety of different core to choose from, such as kevlar core, highly flexible core (HF) high performance (HP) and high performance and high toughness (HPF)
MEGADYNE Timing belt comprehensive solution
MEGADYNEMEGADYNE opening by the thermoplastic polyurethane timing belt is made of high wear resistance. Various types of steel core to ensure its tran***ission in high-load operation is still good capacity.
Production tolerances. MEGADYNE drive, reliable and dimensional stability. Production process in the tooth surface and / or add a layer of nylon cloth back teeth to ensure that applicati*** running in the special characteristics of the same. Also thick layer of polyurethane on the back of the belt to prevent corrosion or high load.
Specificati*** Model: T5-T10-T20 AT3-AT5-AT10-AT20 MTD3M-MTD5M-MTD8M-MTD14M STD 5M-STD 8M RPP5-RPP8-RPP14 P1-P2-P4
TG5-TG10-TG20-ATG10-ATG20-HG XL-L-H-XH
MEGADYNE has the following properties:
Mechanical properties
- Dimensional stability
- Low pre-tension
- Low noise
- Highly resistant to wear
- No maintenance
- Good elasticity
- Highly accurate linear
- Linear speeds up to 80 m / s
Chemical properties
Anti-aging, water solution, UV UVA, anti-ozone
Operating temperature: -30 ℃ ~ +80 ℃ can withstand up to +110 ℃ short time
High degree of anti-oil, ester oil
Resistant to most acids and alkaline
Can be combined with other thermoplastic materials
MEGALINEAR open belt loading zone can produce rolls and interface with two.
Opening with
Opening with a finished product as a continuous length, parallel to the middle and on both sides of the core wire. Standard roll length of 50 or 100 meters, other lengths please contact our sales staff.
MEGALINEAR opening line with commonly used mobile gear
Interface ring
Interface is based on thermoplastic properties with the open ring with a belt made of processing, can be connected into the ring with any length. Its multi-interface design V-belt interface area can withstand a strong pull.
Interface with applicable transportation purposes, in particular the case when the nominal power, can produce different uses, tooth belt, and attach a different plate and cover.
MEGALINEAR belt with a variety of different core to choose from, such as kevlar core, highly flexible core (HF) high performance (HP) and high performance and high toughness (HPF)
MEGADYNE Timing belt comprehensive solution