| Newt***4th PPA55** & Voltech PM6000 | ||
| PPA5530 | PM6000 | |
| Frequency Range/频率范围 | 10mHz to 2MHz | DC &0.1Hz to 1MHz |
| Effective bandwidth is 1MHz because 10MHz is only ***ailable with the 1A shunt in burst mode with fundamental above 10kHz | ||
| PM6000有效带宽是1MHz,其所提供的10MHz带宽是指配合1A分流器在频率高于10kHz基础上的突变模式下才有效。 | ||
| Voltage Range/电压范围 | 1-2500Vpk | 5-2000Vpk |
| Voltage Ranges/电压档 | 9 | 9 |
| Current Range/电流范围 | 0.03-300Apk (30Arms shunt) | 0.5-250Apk |
| Current Ranges/电流档 | 9 | 9 |
| Sample Rate/采样率 | Real time no gap-2.2Ms/s | 5Ms/s(40Ms/s is burst mode > 10kHz fund only) |
| Basic V accuracy/电压的基本精度 | 0.02%***+0.03%rng | 0.02%***+0.05%rng |
| Basic A accuracy/电流的基本精度 | 0.02%***+0.03%rng | 0.02%***+0.05%rng |
| Phases/通道数 | 1-3（主从模式可以达到6） | 1-6 |
| Crest Factor/波峰因素 | 20 | 8 |
| Current Channel CMRR @50Hz | 150dB(250Vrms) | 120dB |
| Safety Isolation | 3250V for 1 Minute | 3700V for 1 Minute |
| Harmonics/谐波测试 | Standard | Standard |
| RS232/接口 | Standard | Standard |
| USB Device/接口 | Standard | No |
| LAN/接口 | Standard | No |
| GPIB/接口 | Option | Only via RS232 Converter |
| Calibration over complete operating range | Yes | No |
| Note/备注 | Widest direct voltage an current frequency range | Effective bandwidth is 1MHz |
| Widest current range | Headline 10MHz frequency applies only to the 1A shunt with burst mode and fundamental above 10kHz | |
| Full spec crest factor of 20 | GPIB via RS232 converter is slower than a true IEEE port and does not fully comply to all IEEE-488 | |
| Highest CMRR@100kHz,130dB | Torque and speed measurement via I/O port adaptor is very inconvenient | |
| Traceable calibration and certification over the complete operationg range. | Watts deviation not clear from user manual or technical specification as formula utilises un***ilable data | |
| Limited calibration and certification / 有限的校准和验证 | ||
| N4L中国区代理：深圳市全亿达电子有限公司 0755-86652115/86652125 | ||