为了提高淮安SKF轴承的整体运行效率，有必要根据轴承的使用情况进行防锈处理。一般来说，为了避免轴承生锈和延长使用寿命，bi须使用一些必要的工具。我们应该如何分析它？参考文献如下：
In order to improve the overall operation efficiency of Huaian SKF bearings, it is necessary to prevent rust according to the use of bearings. Generally speaking, in order to ***oid bearing rust and prolong service life, Bi must use some necessary tools. How should we analyze it? The references are as follows:
1：冷热防护，轴承生锈主要是由金属离子的化学反应引起的。如果阴阳离子的到有笑控制，可以大致又效地防止轴承阴极与外界潮湿环境的化学反应，从而防止生锈问题的发生。
1: Cold and heat protection, bearing rust is mainly caused by the chemical reaction of metal i***. If the ani*** and cati*** are controlled by laughter, the chemical reaction between the bearing cathode and the outside humid environment can be roughly and effectively prevented, thus preventing the occurrence of rust problems.
2：防腐蚀，使用轴承时，湿度和温度控制，如高温，可以使用空调等冷雀系统来保证轴承的正常运行，同时使用you质润滑脂来帮助轴承有校散热，防止轴承生锈的发生。天燃气产品。
2: Anti-corrosion, when using bearings, humidity and temperature control, such as high temperature, can use air-conditioning and other cold sparrow system to ensure the normal operation of bearings, while using your grease to help the bearings to adjust heat dissipation, prevent the occurrence of bearing rust. Natural gas products.
生锈是淮安SKF轴承使用的障碍。使用油效的关键点可以防止轴承损坏，减少轴承维护，提高轴承效率。
Rust is an obst***e to the use of SKF bearings in Huaian. The key point of using oil efficiency can prevent bearing damage, reduce bearing maintenance and improve bearing efficiency.
向心推力球轴承的清洁度是否影响其性能？
Does the cleanliness of centripetal thrust ball bearing affect its performance?
离心推力球轴承是精mi零件，因此在使用中需要非常小心。即使使用了高性能轴承，如果使用不当，也无法达到预期的性能，轴承很容易损坏。
Centrifugal thrust ball bearings are precision mi parts, so they need to be very careful in use. Even if high-performance bearings are used, if used improperly, the expected performance can not be achieved and the bearings are easily damaged.
1。对向心推力球轴承寿命的影响：
1. The influence on the life of centripetal thrust ball bearings:
轴承的清洁度对向心推力球淮安SKF轴承的寿命有很大影响。因此，差异是几次甚至几十次。向心推力球轴承的试验表明，不同清洁度的润滑油对球轴承的寿命有很大影响。因此，提高润滑油的清洁度可以延长向心推力球轴承的使用寿命。此外，如果将润滑油中的污染物颗粒控制在10μm以下，向心推力球轴承的使用寿命将提高一倍。
The cleanliness of the bearing has a great influence on the life of the centripetal thrust ball Huaian SKF bearing. Therefore, the difference is several or even dozens of times. The tests of centripetal thrust ball bearings show that lubricants with different cleanliness h***e a great influence on the life of ball bearings. Therefore, improving the cleanliness of lubricating oil can prolong the service life of centripetal thrust ball bearings. In addition, if the pollutant particles in lubricating oil are controlled below 10 um, the service life of centripetal thrust ball bearings will be doubled.
2。向心推力球轴承对振动和噪声的影响：
2. The influence of centripetal thrust ball bearing on vibration and noise:
（1）振动效应：清洁度严重影响向心推力球淮安SKF轴承的振动水平，特别是高频段。清洁度高的轴承振动速度低，特别是在高频段。
(1) Vibration effect: Cleanliness seriously affects the vibration level of centripetal thrust ball Huaian SKF bearing, especially in high frequency band. The bearing with high cleanliness has low vibration speed, especially in high frequency band.
（2）噪声影响：石油公司检测到粉尘对向心推力球轴承油噪声的影响。实践证明，灰尘越多，噪音越大。
(2) Noise effect: Oil company detected the influence of dust on oil noise of centripetal thrust ball bearing. Practice has proved that the more dust, the greater the noise.
三。对润滑性能的影响：
Three. The influence on lubrication performance:
向心推力球轴承清洁度的恶化不仅影响润滑油膜的形成，而且导致润滑脂变质和加速老化，从而影响润滑脂的润滑性能。
The deterioration of cleanliness of centripetal thrust ball bearings not only affects the formation of lubricating oil film, but also leads to deterioration and accelerated aging of lubricating grease, thus affecting the lubricating performance of lubricating grease.
向心推力球轴承外圈与壳体孔配合紧密时，壳体也可加热装入轴承。特别是淮安SKF轴承轻金属轴承座配合紧密时，压入轴承外圈会损坏配合面。此时，应加热轴承座。
When the outer ring of the centripetal thrust ball bearing is closely matched with the shell hole, the shell can also be heated and loaded into the bearing. Especially when the light metal bearing seat of Huaian SKF bearings is closely matched, pressing into the outer ring of the bearing will damage the matching surface. At this time, the bearing seat should be heated.
文章来自：淮安SKF轴承 www.wh-
Article from: Huaian SKF Bearing www.wh-
文章来自：淮安INA轴承 a-
Article from: Huaian INA Bearing a-
文章来自：淮安NSK轴承
Article from: Huaian NSK Bearing
***：524085168
电话：0510-81207777
手机：13311666672/13395185757