对于密封进口轴承，在生产过程中加入适当的INA轴承油脂，打开轴承上主套筒的密封，防止润滑脂泄漏。这已成为轴承润滑脂的问题。注意太少的脂肪很容易导致脂肪不足或干摩擦，影响生活。润滑脂会导致轴承温升过高。石油泄漏不仅污染环境，而且浪费资源。因此，在进口轴承润滑脂的前提下，更好的轴承可以保证充分的润滑。
For sealed imported bearings, proper INA bearing grease is added to the production process to open the seal of the main sleeve on the bearing to prevent grease leakage. This has become a problem of bearing grease. Attention to too little fat can easily lead to insufficient fat or dry friction, affecting life. Grease can cause excessive temperature rise of bearings. The oil spill not only pollutes the environment, but also wastes resources. Therefore, on the premise of importing bearing grease, better bearings can ensure adequate lubrication.
润滑摩擦：抵抗机械摩擦，膜表面的一部分。冷que温度：油循环带走热量，防止烧结。清洁：通过INA轴承油脂油流清洁摩擦部件和金属产生的其余材料。密封防漏：减少气体泄漏和外部污染物。腐蚀：可吸附在表面，防止水、空气、酸、***气体和接触部位。缓冲区：发动机气缸压力突然升高，活塞、活塞销、连杆和曲轴进口轴承的油负荷突然升高，从而能够承受冲击负荷起到缓冲作用。
Lubrication friction: resistance to mechanical friction, part of the film surface. Cold que temperature: oil circulation takes away heat and prevents sintering. Cleaning: Clean friction parts and other materials produced by metals through INA bearing grease oil flow. Sealing leak-proof: reduce gas leakage and external pollutants. Corrosion: It can be adsorbed on the surface to prevent water, air, acid, harmful gases and contact parts. Buffer Zone: The engine cylinder pressure suddenly increases, and the oil load of piston, piston pin, connecting rod and crankshaft inlet bearings suddenly increases, so as to be able to withstand the impact load to play a buffer role.
漏油的主要原因有三个：
There are three main reas*** for the oil spill:
化学原因：部分加热和空气摩擦润滑效果不好，基础油和增稠剂被氧化，导致INA轴承油脂结构损坏，使用软hua损失。
Chemical Reas***: Part of heating and air friction lubrication effect is not good, base oil and thickener are oxidized, resulting in INA bearing oil structure damage, the use of soft Hua loss.
物理原因：由于某些操作中的摩擦，肥皂结构在恒剪应力下受到***，导致软hua损失。
Physical reason: due to friction in some operati***, soap structure is damaged under c***tant shear stress, resulting in soft Hua loss.
杂质产生的原因：在运动服装中，金属粉末会加速有ji酸、油和脂肪的氧化，从而***结构，导致INA轴承油脂失效。根据设备的运行状况（包括负荷、温度、转速等），正确选择润滑脂，延长润滑脂的使用寿命。
Reas*** for impurities: In sportswear, metal powder will accelerate the oxidation of jiacid, oil and fat, thus destroying the structure, leading to INA bearing oil failure. According to the operation status of the equipment (including load, temperature, speed, etc.), the lubricating grease should be selected correctly to prolong the service life of the grease.
文章来自：淮安SKF轴承 www.wh-
文章来自：淮安INA轴承 a-
文章来自：淮安NSK轴承
***：524085168
电话：0510-81207777
手机：13311666672/13395185757