进口NSK轴承防尘装置的基本要求是在保证装置质量指标的前提下，套比应高于正常值，并应达到套比的95个百分点以上。
The basic requirement of imported NSK bearing dust-proof device is that the sleeve ratio should be higher than the normal value under the premise of guaranteeing the quality index of the device, and should reach more than 95 percent of the sleeve ratio.
径向间隙和径向宽度是衡量进口轴承装置质量和精度的重要指标。轴向间隙与径向间隙有一定的函数关系。因此，可以通过控制径向间隙间接控制轴向间隙。其中，轴承设计的基本要求如下，让我们参与其中。
Radial clearance and radial width are important indexes to measure the quality and accuracy of imported bearing devices. There is a certain functional relati***hip between the axial clearance and the radial clearance. Therefore, the axial clearance can be indirectly controlled by controlling the radial clearance. Among them, the basic requirements of bearing design are as follows, let's participate in it.
对于推力球轴承、推力滚子轴承和NSK轴承防尘，高度和宽度控制非常重要。
For dust prevention of thrust ball bearings, thrust roller bearings and NSK bearings, height and width control is very important.
对于进口轴承的角接触轴承，角接触尺寸的控制非常重要。
For the angular contact bearing of imported bearing, the control of angular contact size is very important.
对于深沟球轴承、圆柱滚子轴承、调心滚子轴承和调心滚子轴承，径向游隙的控制非常重要。
For deep groove ball bearings, cylindrical roller bearings, self-aligning roller bearings and self-aligning roller bearings, the control of radial clearance is very important.
1。安装时应注意轴承的清洁。一般来说，轴承应该用干净的油或防锈油清洗。
1. Attention should be paid to the cleaning of bearings during installation. Generally speaking, bearings should be cleaned with clean oil or rust-proof oil.
2。安装后注意周围环境，保持轴承清洁。
2. After installation, pay attention to the surrounding environment and keep the bearings clean.
三。为了及时添加轴承润滑脂，当开式轴承的工作温度较高时，润滑脂会流失。
Three. In order to add bearing grease in time, when the operating temperature of open-type bearings is higher, the grease will be lost.
4。必要时应在轴承上添加密封件。
4. Seals should be added to bearings when necessary.
NSK轴承防尘工作及其重要性，即使在使用中粉尘很小，也会导致轴承润滑bu良，油脂污染，增加轴承的摩擦，缩短轴承的使用寿命。
Dust-proof work of NSK bearings and its importance, even if the dust is very ***all in use, will lead to good lubrication of bearings, grease pollution, increase the friction of bearings, shorten the service life of bearings.
轴承出厂时涂有适当的防锈油，并用防锈纸包装。只要填料没有损坏，轴承的质量就会的到保证。但是，对于长期储存，建议将其存放在离地30厘米的架子上，湿度小于65个百分点，温度约为20摄氏度。此外，储存设施应避免阳光直射或冷壁接触。
The bearings are coated with proper rust-proof oil and packed with rust-proof paper when they le***e the factory. As long as the packing is not damaged, the quality of the bearing will be guaranteed. However, for long-term storage, it is recommended to store it on a shelf 30 centimeters away from the ground, with humidity less than 65 percentage points and temperature about 20 degrees Celsius. In addition, storage facilities should ***oid direct sunlight or cold wall contact.
瑞典作为轴承的主要生产国，拥有领线的NSK轴承防尘品牌。它有多年的生产历史。有丰富的轴承生产经验。尤其是瑞典轴承的设计、研究和开发形成了自己的实践。瑞典轴承继续改进其技术，并致力于生产业内醉好的轴承。实践证明，它一直是一种很好的方法。行业领倒者。
Sweden, as the main producer of bearings, has a leading NSK bearing dust-proof brand. It has many years of production history. Has rich bearing production experience. In particular, Swedish bearing design, research and development has formed its own practice. Swedish bearings continue to improve their technology and are committed to the production of drunk bearings in the industry. Practice has proved that it has always been a good method. Industry leader.
瑞典轴承拥有自己的大型专ye跨国生产公司，是世界上醉大的轴承专ye生产商，拥有自己独特的生产和营销模式，无论是轴承的生产技术还是其营销模式，都可以称得上是行业领倒者。
Sweden bearings has its own large-scale specialized Ye multinational production company, is the world's drunk specialized ye producer, has its own unique production and marketing mode, whether bearing production technology or its marketing mode, can be said to be the industry leader.
文章来自：淮安SKF轴承 www.wh-
Article from: Huaian SKF Bearing www.wh-
文章来自：淮安INA轴承 a-
Article from: Huaian INA Bearing a-
文章来自：淮安NSK轴承
Article from: Huaian NSK Bearing
***：524085168
电话：0510-81207777
手机：13311666672/13395185757