RAD IPmux-24 TDM电路仿真接入网关
对于伪/电路仿真标准，包括***支持的TDMoIP，的CESoPSN，SATOP和HDLCoPSN
•业界***的自适应适用于蜂窝回程时钟***机制以上基于分组的网络
•Carrier-class/environmentally强化设备
•丰富的OAM和性能监控功能
•三自动检测千兆或快速以太网SFP或UTP型端口，以及一，二或四个TDM业务端口
IPmux®-24在提供传统服务分组网络。该设备转换从用户的E1/T1端口的数据流进入数据包传输的网络。这些帧格式
数据包是IP或MPLS。这些数据包通过的IPmux-24Ethernet传输网络端口连接到PSN。远程伪设备的报文转换回到原来的用户流量格式。
伪的功能
基于ASIC的架构提供了一个强大和高性能的伪解决方案以***小的处理延迟。
本机支持各种伪封装方法，包括的TDMoIP，的CESoPSN，SATOP，HDLCoPSN。PSN的吞吐量之间的适当平衡
和延迟是通过配置实现包的大小。抖动缓冲器补偿报文延迟变异高达180毫秒（抖动）在网络上。
Ordering
IPmux-24/#/!/?/~/*/$/+1/+2/+3
Legend
# Ethernet interface (Default=FE and GbE
capabilities)
FE Fast Ethernet interface only
! Power supply type (Default=AC/DC
power supply):
WRDC Wide range DC power supply for
environmentally hardened
device
? Enclosure(Default=regular device)
H Environmentally hardened
device
~ Clock recovery (Default=standard clock
recovery)
A Advanced clock recovery
mechani*** (per TDM port)
* Package (Default=no carrier-class
package)
C Carrier-class package (external
clock and alarm relay)
$ TDM interface
1E1 Single balanced E1 interface
1E1CX Single unbalanced E1 interface
1T1 Single balanced T1 interface
2E1 2 balanced E1 interfaces
2E1CX 2 unbalanced E1 interfaces
2T1 2 balanced T1 interfaces
4E1 4 balanced E1 interfaces
4E1CX 4 unbalanced E1 interfaces
4T1 4 balanced T1 interfaces
Note: Unbalanced E1 interfaces are provided via
RJ-45 to BNC adapter cables supplied with the
product.
+1 Network interface
N SFP-ready slot
1 Fast Ethernet/STM-1, 1310 nm,
multimode, LED, 2 km (1.2 mi)
2 Fast Ethernet/STM-1, 1310 nm,
single mode, laser, 15 km
(9.3 mi)
2H Fast Ethernet/STM-1,
industrially hardened, 1310 nm,
single mode, laser, 15 km
(9.3 mi)
3 Fast Ethernet/STM-1, 1310 nm,
single mode, laser, 40 km