除锈抛丸机-如鑫机械-除锈抛丸机厂家

手推式除锈机特点：1，可根据型材2的大小调整锈蚀宽度，型号为手动推进，操作简单方便。 3，重量轻，易于安装和拆卸，省时省力。快速和多人。整个身体僵硬而轻盈。节能，除锈抛丸机报价，动力就足够了。手推式除垢机的特点通道钢，角铁，方管等异形钢，钢板除锈抛丸机，不限于雨水或持久生锈，可用于一级除锈。物理除锈不会损坏材料而不会污染或减小直径，操作简单，效率高，使用方便。除垢机的速度由客户自行控制。实施越快，效果越差。实施越慢越好。请根据实际情况调整速度。 除锈抛丸机

除锈抛丸机轻锈钢筋除锈：通常生锈除锈，常见的除锈方法是生锈除锈剂除锈，喷涂后，将全新，无论是未加工原料钢筋除锈，还是捆扎到位钢棒除锈;无论是螺纹钢筋的除锈还是螺纹钢筋的除锈，强烈建议使用钢铁除锈剂去除锈迹。重锈钢筋除锈：圆棒钢筋除锈：矫直过程中除锈;如果在除锈后不能使用很短时间，强烈建议将钢铁除锈剂浸泡并生锈（防锈两个月））。未加工钢筋除锈：电线刷除锈，喷砂除锈，抛丸，钢筋除锈剂除锈。加工和浓缩储存钢筋用于除锈：可以使用喷砂和除锈，电刷除锈。

除锈抛丸机

工作原理：

在清理室中加入规定数量的工件，机器启动后，滚筒开始旋转，被清理的工件由橡胶履带带动在滚筒内作连续均匀的翻转，同时抛丸器***抛出弹丸形成扇形弹束，均匀的打在工件表面上，从而达到清理和强化的目的。抛出的弹丸及砂粒，经橡胶履带均匀排布的小孔流入清理室底部的钢板筛上，钢板筛将较大颗粒筛出钢丸及细砂落至筛下的螺旋输送器，被送入提升机内，除锈抛丸机厂家，由提升机提至丸砂分离器中进行分离，粉尘由风机吸送至滤筒式除尘器内经滤筒过滤，清洁空气排放大气，滤筒上的灰尘有脉冲反吹落入除尘器下部集尘箱内，定期除尘。旧砂经流砂管流入废砂桶内（用户自备）。由分离器中钢板筛筛下的较大颗粒与未能分离完成的丸砂混合物，经流丸管流入清理室。重新参加分离，分离后干净的弹丸，经流丸管再次流入抛丸器内重新开始抛丸工作。

Working principle:

the specified number of workpiece is added in the cleaning room. After the machine is started，除锈抛丸机， the drum begins to rotate. The cleaned pieces are driven by rubber caterpillar to make a continuous and uniform turnover in the drum. At the same time， the projectile is efficiently thrown out of the projectile to form a fan-shaped beam， which is evenly spread on the surface of the workpiece， thus achieving the cleaning and strengthening items. Yes. The projectile and sand are thrown into the sieve of the steel plate at the bottom of the cleaning room. The steel plate sieves the larger particles out of the steel pellets and the spiral conveyer that the fine sand falls to the sieve. It is sent into the hoist and separated by the hoist to the sand separator， and the dust is sucked from the fan to the filter type dust collector. The filter is filtered through the inner filter， and the air is released to clean the atmosphere. The dust on the filter cartridge is pulsed back blown into the lower dust collecting box of the duster， and is regularly dusting. The old sand flows into the waste sand through the sand pipe. The larger particles under the screen sieves of the separator and the mixture of sand and sand that h***e not been separated are poured into the cleaning chamber through the flow tube. Once again， the projectiles are separated and separated and then flow into the shot blasting device again through the flow tube to restart the shot blasting operation.

?? ??:

??? ?? ?? ?? ? ? ?? ? ??? ?? ? ?? ? ? ?? ? ?? ?? ?? ? ?， ??? ?? ? ?? ?? ? ? ? ?? ? ? ?? ?? ???? ???..??? ?? ? ? ?? ? ? ? ?? ??? ? ?? ?? ? ???? ?? ??? ? ?? ? ? ?? ? ? ? ? ? ?? ? ? ? ? ??? ?? ?? ? ?? ?? ?? ? ??? ??? ? ?? ? ??? ??? ? ??? ?? ? ? ?? ?? ? ?? ? ? ?? ? ??， ?? ? ?? ? ?? ?? ?? ?? ??? ?? ?? ? ??? ??........??? ??? ??? ?? ???? ?????.??? ?? ?? ? ? ? ? ? ?? ? ?? ?? ?? ? ?? ? ? ?? ??? ? ? ? ? ?? ??? ??.??， ?? ? ??? ??? ????， ???? ???? ?? ??? ?? ??? ????.

除锈抛丸机报价