TESEQ 2145 ProfLine

TESEQ 2145 ProfLine完整测试系统适用于IEC 61000-3-2，-3-3, -3-11 和 -3-12每相高达62 安培的三相测试系统适合于测试抗扰度标准的供电电源应用标准：IEC 61000-3-12, IEC 61000-3-11IEC 61000-3-2, IEC 61000-3-3. 其他特点： 该系统提供一台19"机柜，可配合预先安装好系统软件和校准软件的PC机一起使用。ProfLine 2145 is an accurate and flexible 3-phase system designed to measure harmonics and flicker in accordance with IEC 61000-3-12 and IEC 61000-3-11 on products c***uming up to 62 Amps per phase @230 Vac. By adding the optional software and impedance this system can also be used to test to IEC 61000-3-2 and IEC 61000-3-3. The system is supplied complete with a stable, accurate, programmable 15 kVA per phase power source. The ProfLine 2145 system is therefore ready to measure and record any harmonics and flicker created by the EUT. A wide range of different AC source systems are ***ailable from Teseq, please see ProfLine 2103, 2105, 2115, 2130 datasheets for suitable systems at other powers or for 1-phase operation.The system is delivered as a stand alone power supply unit and a suitable 19” rack housing the ancillary and measuring equipment, the system is ready to use with the supplied PC which has pre-installed software and calibration asurements are made using precision, no burden, active hall-effect current transformers connected via a dedicated cable to a multichannel fast Data Acquisition Card (DAQ) fitted inside a PC. One voltage and three current measuring channels per phase are used to make simultaneous measurement of both current and voltage. Calculati*** are made using dedicated Teseq software (WIN 2100) to determine harmonics (classes A-D), inter-harmonics, flicker, dc, dt, dmax, Pst, Plt, inrush current and 24 x pedanceMeasurement of flicker requires a fixed, stable source impedance as specified in IEC 61000-3-11 (0.15 ? + j0.15 ? in each line and 0.1 ? + j0.1 ? in the neutral). A suitable impedance unit INA 2196 is supplied as part of the system.Power quality measurementThe power source (NSG 1007-45) supplied as part of the ProfLine 2145 system is able to perform tests in conformance to a number of immunity standa***. IEC 61000-4-13 (immunity to harmonics and interharmonics), IEC 61000-4-14 (voltage fluctuati***), IEC 61000-4-17 (ripple on DC), IEC 61000-4-28 (variation of power frequency) and IEC 61000-4-34 (voltage dips, interrupts and variation on AC supply > 16 Amps). Additionally it can also perform pre-compliance testing to IEC 61000-4-29 (voltage dips, interrupts and variati*** on DC supply) and IEC 61000-4-11. With the addition of further opti*** IEC 61000-4-8 (power frequency magnetics) and fully compliant IEC 61000-4-11 (Voltage dips, interrupts and variation on AC supply) can be implementedMains supply opti*** ProfLine 2145-208 ProfLine 2145-400System contents NSG 1007-45-208 Power source NSG 1007-45-400 Power source CCN 1000-3 3-phase CCN 1000-3 3-phase coupling unit coupling unit DAQ card DAQ card Interface cable Interface cable WIN 2106 H&F test WIN 21