TESEQ ProfLine 2115

TESEQ ProfLine 2115适用于IEC 61000-3-2 和 -3-3 的完整测试系统每相高达16 安培的三相测试系统适合于测试抗扰度标准的供电电源应用标准：IEC 61000-3-2，IEC 61000-3-3.其他特点：该系统提供一台19"机柜，可配合预先安装好系统软件和校准软件的PC机一起使用。ProfLine 2115 is an accurate and flexible 3-phase system designed to measure harmonics and flicker in accordance with IEC 61000-3-2 and IEC 61000-3-3. The system is supplied complete with a stable, accurate, programmable 5 kVA per phase power source. The ProfLine 2115 system is therefore ready to measure and record any harmonics and flicker created by the EUT. A wide range of different AC source systems are ***ailable from Teseq, please see ProfLine 2103, 2105, 2130, 2145 datasheets for suitable systems at other powers or for 1-phase operation.The system is delivered in a suitable 19” rack, fully integrated and ready to use with the supplied PC which has pre-installed software and calibration asurements are made using precision, no burden, active hall-effect current transformers connected via a dedicated cable to a multichannel fast Data Acquisition Card (DAQ) fitted inside a PC. One voltage and three current measuring channels per phase are used to make simultaneous measurement of both current and voltage. Calculati*** are made using dedicated Teseq software (WIN 2100) to determine harmonics (classes A-D), inter-harmonics, flicker, dc, dt, dmax, Pst, Plt, inrush current and 24 x pedanceMeasurement of flicker requires a fixed, stable source impedance as specified in IEC 61000-3-3 (0.24 ? + j0.15 ? in each line and 0.16 ? + j0.1 ? in the neutral). A suitable impedance unit INA 2153 is supplied as part of the system.Power quality measurementThe power source (NSG 1007-15) supplied as part of the ProfLine 2115 system is able to perform tests in conformance to a number of immunity standa***. IEC 61000-4-13 (immunity to harmonics and interharmonics), IEC 61000-4-14 (voltage fluctuati***), IEC 61000-4-17 (ripple on DC) and IEC 61000-4-28 (variation of power frequency). Additionally it can also perform pre-compliance testing to IEC 61000-4-29 (voltage dips, interrupts and variati*** on DC supply) and IEC 61000-4-11. With the addition of further opti*** IEC 61000-4-8 (power frequency magnetics) and fully compliant IEC 61000-4-11 (voltage dips, interrupts and variation on AC supply) can be implementedMains supply opti*** ProfLine 2115-208 ProfLine 2115-400System contents NSG 1007-15-208 Power source NSG 1007-15-400 Power sourceCCN 1000-3  3-phase  CCN 1000-3  3-phaseCoupling unit Coupling unitDAQ card DAQ cardInterface cable Interface cableWIN 2100 H&F test software WIN 2100 H&F test softwareWIN 2110 PQT test software WIN 2110 PQT test softwarePre-configured PC Pre-configured PCUSB cable USB cablePower source (for full specification see separate datasheet)  Power output (AC mode) 3 x 5,000 VA 3 x 5,000 V***oltage AC, two ranges 0-150 V and 0-300 V 0-150 V and 0-300 VMaximum current (low range) 37.0 Amps/phase, 110 Amps  37.0 Amps/phas